[U-Boot] [PATCH 1/2] imx8: Jump from alias to OCRAM address at SPL init

14 Oct 2019


      ...
When running SPL on iMX8, the A core starts at address 0
which is a alias to OCRAM 0x100000.
The alias only map first 96KB of OCRAM, so this require the
SPL size can't beyond 96KB. But when using SPL DM, the size increase
significantly and may exceed 96KB.
So to fix the problem, we will change SPL linker address to OCRAM
address 0x100000. And then jump to the absolute address not the PC relative
address for entering OCRAM.
Signed-off-by: Ye Li ye.li@nxp.com
Reviewed-by: Oleksandr Suvorov oleksandr.suvorov@toradex.com
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

sbabic＠denx.de

tags (0)

participants (1)