[U-Boot] [PATCH v3 00/17] riscv: Add QEMU virt board support
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3: - net patch to print the relocation address in cmd 'bdinfo' - new patch to imply DM support for some common drivers - reword the reset message a little, and call hang() in the end
Changes in v2: - Change Linux kernel entry parameters' type to support 32/64 bit - new patch to remove CSR read/write defines in encoding.h - new patch to pass mhartid CSR value to kernel - new patch to move do_reset() to a common place
Bin Meng (17): riscv: kconfig: Normalize architecture name spelling riscv: Remove setup.h riscv: bootm: Correct the 1st kernel argument to hart id riscv: Remove mach type riscv: cmd: bdinfo: Print the relocation address riscv: Move the linker script to the CPU root directory riscv: Fix coding style issues in the linker script riscv: Explicitly pass -march and -mabi to the compiler riscv: Add a helper routine to print CPU information riscv: Remove CSR read/write defines in encoding.h riscv: bootm: Pass mhartid CSR value to kernel riscv: Make start.S available for all targets riscv: ae350: Clean up mixed tabs and spaces in the dts riscv: kconfig: Select DM and OF_CONTROL riscv: kconfig: Imply DM support for some common drivers riscv: Add QEMU virt board support riscv: Move do_reset() to a common place
arch/Kconfig | 14 ++- arch/riscv/Kconfig | 10 +- arch/riscv/Makefile | 3 +- arch/riscv/config.mk | 8 +- arch/riscv/cpu/Makefile | 7 ++ arch/riscv/cpu/ax25/Makefile | 2 - arch/riscv/cpu/ax25/cpu.c | 9 -- arch/riscv/cpu/cpu.c | 49 ++++++++ arch/riscv/cpu/qemu/Makefile | 6 + arch/riscv/cpu/qemu/cpu.c | 21 ++++ arch/riscv/cpu/qemu/dram.c | 17 +++ arch/riscv/cpu/{ax25 => }/start.S | 0 arch/riscv/cpu/{ax25 => }/u-boot.lds | 60 +++++----- arch/riscv/dts/ae350.dts | 177 +++++++++++++++-------------- arch/riscv/include/asm/bootm.h | 13 --- arch/riscv/include/asm/csr.h | 124 ++++++++++++++++++++ arch/riscv/include/asm/encoding.h | 50 +------- arch/riscv/include/asm/mach-types.h | 29 ----- arch/riscv/include/asm/setup.h | 194 -------------------------------- arch/riscv/include/asm/u-boot.h | 1 - arch/riscv/lib/Makefile | 1 + arch/riscv/lib/bootm.c | 20 +--- arch/riscv/lib/reset.c | 17 +++ board/AndesTech/ax25-ae350/ax25-ae350.c | 2 - board/emulation/qemu-riscv/Kconfig | 22 ++++ board/emulation/qemu-riscv/MAINTAINERS | 7 ++ board/emulation/qemu-riscv/Makefile | 5 + board/emulation/qemu-riscv/qemu-riscv.c | 23 ++++ cmd/bdinfo.c | 3 +- configs/ax25-ae350_defconfig | 10 -- configs/qemu-riscv32_defconfig | 6 + configs/qemu-riscv64_defconfig | 7 ++ doc/README.qemu-riscv | 46 ++++++++ include/configs/qemu-riscv.h | 21 ++++ 34 files changed, 538 insertions(+), 446 deletions(-) create mode 100644 arch/riscv/cpu/Makefile create mode 100644 arch/riscv/cpu/cpu.c create mode 100644 arch/riscv/cpu/qemu/Makefile create mode 100644 arch/riscv/cpu/qemu/cpu.c create mode 100644 arch/riscv/cpu/qemu/dram.c rename arch/riscv/cpu/{ax25 => }/start.S (100%) rename arch/riscv/cpu/{ax25 => }/u-boot.lds (54%) delete mode 100644 arch/riscv/include/asm/bootm.h create mode 100644 arch/riscv/include/asm/csr.h delete mode 100644 arch/riscv/include/asm/mach-types.h delete mode 100644 arch/riscv/include/asm/setup.h create mode 100644 arch/riscv/lib/reset.c create mode 100644 board/emulation/qemu-riscv/Kconfig create mode 100644 board/emulation/qemu-riscv/MAINTAINERS create mode 100644 board/emulation/qemu-riscv/Makefile create mode 100644 board/emulation/qemu-riscv/qemu-riscv.c create mode 100644 configs/qemu-riscv32_defconfig create mode 100644 configs/qemu-riscv64_defconfig create mode 100644 doc/README.qemu-riscv create mode 100644 include/configs/qemu-riscv.h
It's RISC-V that is the official name, not RISCV.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Reviewed-by: Rick Chen rick@andestech.com ---
Changes in v3: None Changes in v2: None
arch/Kconfig | 2 +- arch/riscv/Kconfig | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig index 11900b0..cd424fd 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -60,7 +60,7 @@ config PPC select SYS_BOOT_GET_KBD
config RISCV - bool "riscv architecture" + bool "RISC-V architecture" select SUPPORT_OF_CONTROL
config SANDBOX diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 20a43d8..49f87de 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -1,4 +1,4 @@ -menu "RISCV architecture" +menu "RISC-V architecture" depends on RISCV
config SYS_ARCH @@ -20,13 +20,13 @@ choice default CPU_RISCV_32
config CPU_RISCV_32 - bool "RISCV 32 bit" + bool "RISC-V 32-bit" select 32BIT help Choose this option to build an U-Boot for RISCV32 architecture.
config CPU_RISCV_64 - bool "RISCV 64 bit" + bool "RISC-V 64-bit" select 64BIT help Choose this option to build an U-Boot for RISCV64 architecture.
This was copied from ARM, and does not apply to RISC-V. While we are here, bootm.h is eventually removed as its content is only the inclusion of setup.h.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/include/asm/bootm.h | 13 --- arch/riscv/include/asm/setup.h | 194 ----------------------------------------- arch/riscv/lib/bootm.c | 1 - 3 files changed, 208 deletions(-) delete mode 100644 arch/riscv/include/asm/bootm.h delete mode 100644 arch/riscv/include/asm/setup.h
diff --git a/arch/riscv/include/asm/bootm.h b/arch/riscv/include/asm/bootm.h deleted file mode 100644 index 6786345..0000000 --- a/arch/riscv/include/asm/bootm.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (c) 2013, Google Inc. - * - * Copyright (C) 2011 - * Corscience GmbH & Co. KG - Simon Schwarz schwarz@corscience.de - */ -#ifndef NDS32_BOOTM_H -#define NDS32_BOOTM_H - -#include <asm/setup.h> - -#endif diff --git a/arch/riscv/include/asm/setup.h b/arch/riscv/include/asm/setup.h deleted file mode 100644 index ff8de16..0000000 --- a/arch/riscv/include/asm/setup.h +++ /dev/null @@ -1,194 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * linux/arch/nds32/include/asm/setup.h - * - * Copyright (C) 1997-1999 Russell King - * Copyright (C) 2008 Andes Technology Corporation - * Copyright (C) 2013 Ken Kuo (ken_kuo@andestech.com) - * Copyright (C) 2017 Rick Chen (rick@andestech.com) - * - * Structure passed to kernel to tell it about the - * hardware it's running on. See Documentation/arm/Setup - * for more info. - */ -#ifndef __RISCV_SETUP_H -#define __RISCV_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - u32 size; - u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - u32 flags; /* bit 0 = read-only */ - u32 pagesize; - u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - u32 size; - u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - u8 x; - u8 y; - u16 video_page; - u8 video_mode; - u8 video_cols; - u16 video_ega_bx; - u8 video_lines; - u8 video_isvga; - u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - u32 flags; /* bit 0 = load, bit 1 = prompt */ - u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* - * this one accidentally used virtual addresses - as such, - * it's deprecated. - * describes where the compressed ramdisk image lives (virtual address) - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - u32 start; /* physical start address */ - u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - u32 low; - u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - u16 lfb_width; - u16 lfb_height; - u16 lfb_depth; - u16 lfb_linelength; - u32 lfb_base; - u32 lfb_size; - u8 red_size; - u8 red_pos; - u8 green_size; - u8 green_pos; - u8 blue_size; - u8 blue_pos; - u8 rsvd_size; - u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[COMMAND_LINE_SIZE]; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - } u; -}; - -struct tagtable { - u32 tag; - int (*parse)(const struct tag *); -}; - -#define tag_member_present(_tag, member) \ - typeof(_tag) (tag) = (_tag); \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(_t) \ - typeof(_t) (t) = (_t); \ - ((struct tag *)((u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(_t, base) \ - typeof(_t) (t) = (_t); \ - for (t = base; t->hdr.size; t = tag_next(t)) - -#ifdef __KERNEL__ - -#define __tag __used __attribute__((__section__(".taglist"))) -#define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } - -/* - * Memory map description - */ -#define NR_BANKS 8 - -struct meminfo { - int nr_banks; - struct { - unsigned long start; - unsigned long size; - int node; - } bank[NR_BANKS]; -}; - -/* - * Early command line parameters. - */ -struct early_params { - const char *arg; - void (*fn)(char **p); -}; - -#define __early_param(name, fn) \ -static struct early_params __early_##fn __used \ -__attribute__((__section__("__early_param"))) = { name, fn } - -#endif -#endif diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index 2610a57..6662aff 100644 --- a/arch/riscv/lib/bootm.c +++ b/arch/riscv/lib/bootm.c @@ -11,7 +11,6 @@ #include <image.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> -#include <asm/bootm.h>
DECLARE_GLOBAL_DATA_PTR;
The first argument of Linux kernel is the risc-v core hart id, from which the kernel is booted from. It is not the mach_id, which seems to be copied from arm.
While we are here, this also changes the Linux kernel entry parameters' type to support both 32-bit and 64-bit.
Note the hart id is hardcoded to zero for now, and we should change to fill in it with the value read from mhartid CSR of the hart which this routine is currently running on.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Reviewed-by: Rick Chen rick@andestech.com
---
Changes in v3: None Changes in v2: - Change Linux kernel entry parameters' type to support 32/64 bit
arch/riscv/lib/bootm.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index 6662aff..6893108 100644 --- a/arch/riscv/lib/bootm.c +++ b/arch/riscv/lib/bootm.c @@ -25,10 +25,7 @@ int arch_fixup_fdt(void *blob)
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) { - bd_t *bd = gd->bd; - char *s; - int machid = bd->bi_arch_number; - void (*theKernel)(int arch, uint params); + void (*kernel)(ulong hart, void *dtb);
/* * allow the PREP bootm subcommand, it is required for bootm to work @@ -39,18 +36,12 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1;
- theKernel = (void (*)(int, uint))images->ep; - - s = env_get("machid"); - if (s) { - machid = simple_strtoul(s, NULL, 16); - printf("Using machid 0x%x from environment\n", machid); - } + kernel = (void (*)(ulong, void *))images->ep;
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong)theKernel); + (ulong)kernel);
if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { #ifdef CONFIG_OF_LIBFDT @@ -66,8 +57,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) printf("\nStarting kernel ...\n\n");
cleanup_before_linux(); + /* TODO: hardcode the hart id to zero for now */ if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) - theKernel(machid, (unsigned long)images->ft_addr); + kernel(0, images->ft_addr);
/* does not return */
Since the mach_id is not used by RISC-V, remove it.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/include/asm/mach-types.h | 29 ----------------------------- arch/riscv/include/asm/u-boot.h | 1 - board/AndesTech/ax25-ae350/ax25-ae350.c | 2 -- cmd/bdinfo.c | 1 - 4 files changed, 33 deletions(-) delete mode 100644 arch/riscv/include/asm/mach-types.h
diff --git a/arch/riscv/include/asm/mach-types.h b/arch/riscv/include/asm/mach-types.h deleted file mode 100644 index f219ced..0000000 --- a/arch/riscv/include/asm/mach-types.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Andes Technology Corporation - * Rick Chen, Andes Technology Corporation rick@andestech.com - */ - -#ifndef __ASM_RISCV_MACH_TYPE_H -#define __ASM_RISCV_MACH_TYPE_H - -#ifndef __ASSEMBLY__ -/* The type of machine we're running on */ -extern unsigned int __machine_arch_type; -#endif - -#define MACH_TYPE_AE350 1 - -#ifdef CONFIG_ARCH_AE350 -# ifdef machine_arch_type -# undef machine_arch_type -# define machine_arch_type __machine_arch_type -# else -# define machine_arch_type MACH_TYPE_AE350 -# endif -# define machine_is_ae350() (machine_arch_type == MACH_TYPE_AE350) -#else -# define machine_is_ae350() (1) -#endif - -#endif /* __ASM_RISCV_MACH_TYPE_H */ diff --git a/arch/riscv/include/asm/u-boot.h b/arch/riscv/include/asm/u-boot.h index 9e5b32d..3186835 100644 --- a/arch/riscv/include/asm/u-boot.h +++ b/arch/riscv/include/asm/u-boot.h @@ -23,7 +23,6 @@ #include <environment.h>
typedef struct bd_info { - unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ unsigned long bi_memsize; /* size of DRAM memory in bytes */ diff --git a/board/AndesTech/ax25-ae350/ax25-ae350.c b/board/AndesTech/ax25-ae350/ax25-ae350.c index fd5aaa1..5f4ca0f 100644 --- a/board/AndesTech/ax25-ae350/ax25-ae350.c +++ b/board/AndesTech/ax25-ae350/ax25-ae350.c @@ -4,7 +4,6 @@ * Rick Chen, Andes Technology Corporation rick@andestech.com */
-#include <asm/mach-types.h> #include <common.h> #if defined(CONFIG_FTMAC100) && !defined(CONFIG_DM_ETH) #include <netdev.h> @@ -21,7 +20,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void) { - gd->bd->bi_arch_number = MACH_TYPE_AE350; gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
return 0; diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index 397dd15..bc440e4 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -424,7 +424,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { bd_t *bd = gd->bd;
- print_num("arch_number", bd->bi_arch_number); print_bi_boot_params(bd); print_bi_dram(bd); print_eth_ip_addr();
Add printing of U-Boot relocation address.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
---
Changes in v3: - net patch to print the relocation address in cmd 'bdinfo'
Changes in v2: None
cmd/bdinfo.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index bc440e4..60b4387 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -426,6 +426,8 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_bi_boot_params(bd); print_bi_dram(bd); + print_num("relocaddr", gd->relocaddr); + print_num("reloc off", gd->reloc_off); print_eth_ip_addr(); print_baudrate();
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
Add printing of U-Boot relocation address.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
Changes in v2: None
cmd/bdinfo.c | 2 ++ 1 file changed, 2 insertions(+)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
The linker script can be shared by all RISC-V targets. Move it to a common place.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/cpu/{ax25 => }/u-boot.lds | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename arch/riscv/cpu/{ax25 => }/u-boot.lds (100%)
diff --git a/arch/riscv/cpu/ax25/u-boot.lds b/arch/riscv/cpu/u-boot.lds similarity index 100% rename from arch/riscv/cpu/ax25/u-boot.lds rename to arch/riscv/cpu/u-boot.lds
There are several coding style issues in the linker script. Fix them.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/cpu/u-boot.lds | 58 +++++++++++++++++++++++------------------------ 1 file changed, 28 insertions(+), 30 deletions(-)
diff --git a/arch/riscv/cpu/u-boot.lds b/arch/riscv/cpu/u-boot.lds index c50b964..f414473 100644 --- a/arch/riscv/cpu/u-boot.lds +++ b/arch/riscv/cpu/u-boot.lds @@ -3,28 +3,27 @@ * Copyright (C) 2017 Andes Technology Corporation * Rick Chen, Andes Technology Corporation rick@andestech.com */ + OUTPUT_ARCH("riscv") ENTRY(_start)
SECTIONS { . = ALIGN(4); - .text : - { + .text : { arch/riscv/cpu/ax25/start.o (.text) }
/* This needs to come before *(.text*) */ .efi_runtime : { - __efi_runtime_start = .; + __efi_runtime_start = .; *(.text.efi_runtime*) *(.rodata.efi_runtime*) *(.data.efi_runtime*) - __efi_runtime_stop = .; + __efi_runtime_stop = .; }
- .text_rest : - { + .text_rest : { *(.text*) }
@@ -39,10 +38,10 @@ SECTIONS . = ALIGN(4);
.got : { - __got_start = .; - *(.got.plt) *(.got) - __got_end = .; - } + __got_start = .; + *(.got.plt) *(.got) + __got_end = .; + }
. = ALIGN(4);
@@ -50,41 +49,40 @@ SECTIONS KEEP(*(SORT(.u_boot_list*))); }
- . = ALIGN(4); + . = ALIGN(4);
.efi_runtime_rel : { - __efi_runtime_rel_start = .; + __efi_runtime_rel_start = .; *(.rel*.efi_runtime) *(.rel*.efi_runtime.*) - __efi_runtime_rel_stop = .; + __efi_runtime_rel_stop = .; }
- . = ALIGN(4); + . = ALIGN(4);
- /DISCARD/ : { *(.rela.plt*) } - .rela.dyn : { - __rel_dyn_start = .; - *(.rela*) - __rel_dyn_end = .; - } + /DISCARD/ : { *(.rela.plt*) } + .rela.dyn : { + __rel_dyn_start = .; + *(.rela*) + __rel_dyn_end = .; + }
- . = ALIGN(4); + . = ALIGN(4);
- .dynsym : { - __dyn_sym_start = .; - *(.dynsym) - __dyn_sym_end = .; - } + .dynsym : { + __dyn_sym_start = .; + *(.dynsym) + __dyn_sym_end = .; + }
- . = ALIGN(4); + . = ALIGN(4);
_end = .;
.bss : { - __bss_start = .; - *(.bss*) + __bss_start = .; + *(.bss*) . = ALIGN(4); __bss_end = .; } - }
At present the compiler flag against which architecture and abi variant the riscv image is built for is not explicitly indicated which means the default compiler configuration is used. But this does not work if we want to build a different target (eg: 32-bit riscv images using a toolchain configured for 64-bit riscv).
Fix this by explicitly passing -march and -mabi to the compiler. Since generically we don't use floating point in U-Boot, specify the RV[32|64]IMA ISA and software floating ABI.
This also fix some alignment coding style issues.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/config.mk | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/config.mk b/arch/riscv/config.mk index c0b3858..b235ae1 100644 --- a/arch/riscv/config.mk +++ b/arch/riscv/config.mk @@ -18,12 +18,16 @@ endif 64bit-emul := elf64lriscv
ifdef CONFIG_32BIT +PLATFORM_CPPFLAGS += -march=rv32ima -mabi=ilp32 PLATFORM_LDFLAGS += -m $(32bit-emul) +CFLAGS_EFI += -march=rv32ima -mabi=ilp32 EFI_LDS := elf_riscv32_efi.lds endif
ifdef CONFIG_64BIT +PLATFORM_CPPFLAGS += -march=rv64ima -mabi=lp64 PLATFORM_LDFLAGS += -m $(64bit-emul) +CFLAGS_EFI += -march=rv64ima -mabi=lp64 EFI_LDS := elf_riscv64_efi.lds endif
@@ -31,8 +35,8 @@ CONFIG_STANDALONE_LOAD_ADDR = 0x00000000 \ -T $(srctree)/examples/standalone/riscv.lds
PLATFORM_CPPFLAGS += -ffixed-gp -fpic -PLATFORM_RELFLAGS += -fno-common -gdwarf-2 -ffunction-sections -LDFLAGS_u-boot += --gc-sections -static -pie +PLATFORM_RELFLAGS += -fno-common -gdwarf-2 -ffunction-sections +LDFLAGS_u-boot += --gc-sections -static -pie
EFI_CRT0 := crt0_riscv_efi.o EFI_RELOC := reloc_riscv_efi.o
This adds a helper routine to print CPU information. Currently it prints all the instruction set extensions that the processor core supports.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/Makefile | 1 + arch/riscv/cpu/Makefile | 5 ++ arch/riscv/cpu/cpu.c | 49 +++++++++++++++++ arch/riscv/include/asm/csr.h | 124 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 179 insertions(+) create mode 100644 arch/riscv/cpu/Makefile create mode 100644 arch/riscv/cpu/cpu.c create mode 100644 arch/riscv/include/asm/csr.h
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 084888a..af432e1 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -5,5 +5,6 @@
head-y := arch/riscv/cpu/$(CPU)/start.o
+libs-y += arch/riscv/cpu/ libs-y += arch/riscv/cpu/$(CPU)/ libs-y += arch/riscv/lib/ diff --git a/arch/riscv/cpu/Makefile b/arch/riscv/cpu/Makefile new file mode 100644 index 0000000..63de163 --- /dev/null +++ b/arch/riscv/cpu/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + +obj-y += cpu.o diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c new file mode 100644 index 0000000..ae57fb8 --- /dev/null +++ b/arch/riscv/cpu/cpu.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#include <common.h> +#include <asm/csr.h> + +enum { + ISA_INVALID = 0, + ISA_32BIT, + ISA_64BIT, + ISA_128BIT +}; + +static const char * const isa_bits[] = { + [ISA_INVALID] = NULL, + [ISA_32BIT] = "32", + [ISA_64BIT] = "64", + [ISA_128BIT] = "128" +}; + +static inline bool supports_extension(char ext) +{ + return csr_read(misa) & (1 << (ext - 'a')); +} + +int print_cpuinfo(void) +{ + char name[32]; + char *s = name; + int bit; + + s += sprintf(name, "rv"); + bit = csr_read(misa) >> (sizeof(long) * 8 - 2); + s += sprintf(s, isa_bits[bit]); + + supports_extension('i') ? *s++ = 'i' : 'r'; + supports_extension('m') ? *s++ = 'm' : 'i'; + supports_extension('a') ? *s++ = 'a' : 's'; + supports_extension('f') ? *s++ = 'f' : 'c'; + supports_extension('d') ? *s++ = 'd' : '-'; + supports_extension('c') ? *s++ = 'c' : 'v'; + *s++ = '\0'; + + printf("CPU: %s\n", name); + + return 0; +} diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h new file mode 100644 index 0000000..50fccea --- /dev/null +++ b/arch/riscv/include/asm/csr.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2015 Regents of the University of California + * + * Taken from Linux arch/riscv/include/asm/csr.h + */ + +#ifndef _ASM_RISCV_CSR_H +#define _ASM_RISCV_CSR_H + +/* Status register flags */ +#define SR_SIE _AC(0x00000002, UL) /* Supervisor Interrupt Enable */ +#define SR_SPIE _AC(0x00000020, UL) /* Previous Supervisor IE */ +#define SR_SPP _AC(0x00000100, UL) /* Previously Supervisor */ +#define SR_SUM _AC(0x00040000, UL) /* Supervisor access User Memory */ + +#define SR_FS _AC(0x00006000, UL) /* Floating-point Status */ +#define SR_FS_OFF _AC(0x00000000, UL) +#define SR_FS_INITIAL _AC(0x00002000, UL) +#define SR_FS_CLEAN _AC(0x00004000, UL) +#define SR_FS_DIRTY _AC(0x00006000, UL) + +#define SR_XS _AC(0x00018000, UL) /* Extension Status */ +#define SR_XS_OFF _AC(0x00000000, UL) +#define SR_XS_INITIAL _AC(0x00008000, UL) +#define SR_XS_CLEAN _AC(0x00010000, UL) +#define SR_XS_DIRTY _AC(0x00018000, UL) + +#ifndef CONFIG_64BIT +#define SR_SD _AC(0x80000000, UL) /* FS/XS dirty */ +#else +#define SR_SD _AC(0x8000000000000000, UL) /* FS/XS dirty */ +#endif + +/* SATP flags */ +#if __riscv_xlen == 32 +#define SATP_PPN _AC(0x003FFFFF, UL) +#define SATP_MODE_32 _AC(0x80000000, UL) +#define SATP_MODE SATP_MODE_32 +#else +#define SATP_PPN _AC(0x00000FFFFFFFFFFF, UL) +#define SATP_MODE_39 _AC(0x8000000000000000, UL) +#define SATP_MODE SATP_MODE_39 +#endif + +/* Interrupt Enable and Interrupt Pending flags */ +#define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */ +#define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */ + +#define EXC_INST_MISALIGNED 0 +#define EXC_INST_ACCESS 1 +#define EXC_BREAKPOINT 3 +#define EXC_LOAD_ACCESS 5 +#define EXC_STORE_ACCESS 7 +#define EXC_SYSCALL 8 +#define EXC_INST_PAGE_FAULT 12 +#define EXC_LOAD_PAGE_FAULT 13 +#define EXC_STORE_PAGE_FAULT 15 + +#ifndef __ASSEMBLY__ + +#define csr_swap(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrrw %0, " #csr ", %1" \ + : "=r" (__v) : "rK" (__v) \ + : "memory"); \ + __v; \ +}) + +#define csr_read(csr) \ +({ \ + register unsigned long __v; \ + __asm__ __volatile__ ("csrr %0, " #csr \ + : "=r" (__v) : \ + : "memory"); \ + __v; \ +}) + +#define csr_write(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrw " #csr ", %0" \ + : : "rK" (__v) \ + : "memory"); \ +}) + +#define csr_read_set(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrrs %0, " #csr ", %1" \ + : "=r" (__v) : "rK" (__v) \ + : "memory"); \ + __v; \ +}) + +#define csr_set(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrs " #csr ", %0" \ + : : "rK" (__v) \ + : "memory"); \ +}) + +#define csr_read_clear(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrrc %0, " #csr ", %1" \ + : "=r" (__v) : "rK" (__v) \ + : "memory"); \ + __v; \ +}) + +#define csr_clear(csr, val) \ +({ \ + unsigned long __v = (unsigned long)(val); \ + __asm__ __volatile__ ("csrc " #csr ", %0" \ + : : "rK" (__v) \ + : "memory"); \ +}) + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_RISCV_CSR_H */
There is no reason to keep two versions of CSR read/write defines in encoding.h. We already have one set of defines in csr.h, which is from Linux kernel, and let's drop the one in encoding.h.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Reviewed-by: Rick Chen rick@andestech.com
---
Changes in v3: None Changes in v2: - new patch to remove CSR read/write defines in encoding.h
arch/riscv/include/asm/encoding.h | 50 ++++----------------------------------- 1 file changed, 4 insertions(+), 46 deletions(-)
diff --git a/arch/riscv/include/asm/encoding.h b/arch/riscv/include/asm/encoding.h index f237a72..9ea50ce 100644 --- a/arch/riscv/include/asm/encoding.h +++ b/arch/riscv/include/asm/encoding.h @@ -128,6 +128,7 @@ ((SUPERVISOR) ? PTE_SR(PTE) : PTE_UR(PTE)))
#ifdef __riscv + #ifdef CONFIG_64BIT # define MSTATUS_SD MSTATUS64_SD # define SSTATUS_SD SSTATUS64_SD @@ -141,53 +142,10 @@ # define MCAUSE_INT MCAUSE32_INT # define MCAUSE_CAUSE MCAUSE32_CAUSE #endif + #define RISCV_PGSHIFT 12 #define RISCV_PGSIZE BIT(RISCV_PGSHIFT)
-#ifndef __ASSEMBLER__ - -#ifdef __GNUC__ - -#define read_csr(reg) ({ unsigned long __tmp; \ - asm volatile ("csrr %0, " #reg : "=r"(__tmp)); \ - __tmp; }) - -#define write_csr(reg, _val) ({ \ -typeof(_val) (val) = (_val); \ -if (__builtin_constant_p(val) && (unsigned long)(val) < 32) \ - asm volatile ("csrw " #reg ", %0" :: "i"(val)); \ -else \ - asm volatile ("csrw " #reg ", %0" :: "r"(val)); }) - -#define swap_csr(reg, _val) ({ unsigned long __tmp; \ -typeof(_val) (val) = (_val); \ -if (__builtin_constant_p(val) && (unsigned long)(val) < 32) \ - asm volatile ("csrrw %0, " #reg ", %1" : "=r"(__tmp) : "i"(val)); \ -else \ - asm volatile ("csrrw %0, " #reg ", %1" : "=r"(__tmp) : "r"(val)); \ - __tmp; }) - -#define set_csr(reg, _bit) ({ unsigned long __tmp; \ -typeof(_bit) (bit) = (_bit); \ -if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ - asm volatile ("csrrs %0, " #reg ", %1" : "=r"(__tmp) : "i"(bit)); \ -else \ - asm volatile ("csrrs %0, " #reg ", %1" : "=r"(__tmp) : "r"(bit)); \ - __tmp; }) - -#define clear_csr(reg, _bit) ({ unsigned long __tmp; \ -typeof(_bit) (bit) = (_bit); \ -if (__builtin_constant_p(bit) && (unsigned long)(bit) < 32) \ - asm volatile ("csrrc %0, " #reg ", %1" : "=r"(__tmp) : "i"(bit)); \ -else \ - asm volatile ("csrrc %0, " #reg ", %1" : "=r"(__tmp) : "r"(bit)); \ - __tmp; }) - -#define rdtime() read_csr(time) -#define rdcycle() read_csr(cycle) -#define rdinstret() read_csr(instret) +#endif /* __riscv */
-#endif -#endif -#endif -#endif +#endif /* RISCV_CSR_ENCODING_H */
So far this is hardcoded to zero, and we should read the value from mhartid CSR and pass it to Linux kernel.
Suggested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Reviewed-by: Rick Chen rick@andestech.com
---
Changes in v3: None Changes in v2: - new patch to pass mhartid CSR value to kernel
arch/riscv/lib/bootm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/lib/bootm.c b/arch/riscv/lib/bootm.c index 6893108..a7a9fb9 100644 --- a/arch/riscv/lib/bootm.c +++ b/arch/riscv/lib/bootm.c @@ -11,6 +11,7 @@ #include <image.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> +#include <asm/csr.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -57,9 +58,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) printf("\nStarting kernel ...\n\n");
cleanup_before_linux(); - /* TODO: hardcode the hart id to zero for now */ + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) - kernel(0, images->ft_addr); + kernel(csr_read(mhartid), images->ft_addr);
/* does not return */
Currently start.S is inside arch/riscv/cpu/ax25/, but it can be common for all RISC-V targets.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/Makefile | 2 +- arch/riscv/cpu/Makefile | 2 ++ arch/riscv/cpu/ax25/Makefile | 2 -- arch/riscv/cpu/{ax25 => }/start.S | 0 arch/riscv/cpu/u-boot.lds | 2 +- 5 files changed, 4 insertions(+), 4 deletions(-) rename arch/riscv/cpu/{ax25 => }/start.S (100%)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index af432e1..8fb6a88 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -3,7 +3,7 @@ # Copyright (C) 2017 Andes Technology Corporation. # Rick Chen, Andes Technology Corporation rick@andestech.com
-head-y := arch/riscv/cpu/$(CPU)/start.o +head-y := arch/riscv/cpu/start.o
libs-y += arch/riscv/cpu/ libs-y += arch/riscv/cpu/$(CPU)/ diff --git a/arch/riscv/cpu/Makefile b/arch/riscv/cpu/Makefile index 63de163..2cc6757 100644 --- a/arch/riscv/cpu/Makefile +++ b/arch/riscv/cpu/Makefile @@ -2,4 +2,6 @@ # # Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com
+extra-y = start.o + obj-y += cpu.o diff --git a/arch/riscv/cpu/ax25/Makefile b/arch/riscv/cpu/ax25/Makefile index c3f164c..2ab0342 100644 --- a/arch/riscv/cpu/ax25/Makefile +++ b/arch/riscv/cpu/ax25/Makefile @@ -3,6 +3,4 @@ # Copyright (C) 2017 Andes Technology Corporation # Rick Chen, Andes Technology Corporation rick@andestech.com
-extra-y = start.o - obj-y := cpu.o diff --git a/arch/riscv/cpu/ax25/start.S b/arch/riscv/cpu/start.S similarity index 100% rename from arch/riscv/cpu/ax25/start.S rename to arch/riscv/cpu/start.S diff --git a/arch/riscv/cpu/u-boot.lds b/arch/riscv/cpu/u-boot.lds index f414473..11bc4a7 100644 --- a/arch/riscv/cpu/u-boot.lds +++ b/arch/riscv/cpu/u-boot.lds @@ -11,7 +11,7 @@ SECTIONS { . = ALIGN(4); .text : { - arch/riscv/cpu/ax25/start.o (.text) + arch/riscv/cpu/start.o (.text) }
/* This needs to come before *(.text*) */
There are quite a lot of mixed tabs and spaces in the ae350.dts. Clean them up.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/riscv/dts/ae350.dts | 177 ++++++++++++++++++++++++----------------------- 1 file changed, 90 insertions(+), 87 deletions(-)
diff --git a/arch/riscv/dts/ae350.dts b/arch/riscv/dts/ae350.dts index 2927e41..4717ae8 100644 --- a/arch/riscv/dts/ae350.dts +++ b/arch/riscv/dts/ae350.dts @@ -1,144 +1,147 @@ /dts-v1/;
/ { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,ax25"; - model = "andestech,ax25"; + #address-cells = <2>; + #size-cells = <2>; + compatible = "andestech,ax25"; + model = "andestech,ax25";
aliases { uart0 = &serial0; spi0 = &spi; - } ; + };
chosen { bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7"; stdout-path = "uart0:38400n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <10000000>; - CPU0: cpu@0 { - device_type = "cpu"; - reg = <0>; - status = "okay"; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv39"; - clock-frequency = <60000000>; - CPU0_intc: interrupt-controller { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - }; - }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <10000000>; + + CPU0: cpu@0 { + device_type = "cpu"; + reg = <0>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv39"; + clock-frequency = <60000000>; + + CPU0_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; };
memory@0 { device_type = "memory"; - reg = <0x0 0x00000000 0x0 0x40000000>; + reg = <0x0 0x00000000 0x0 0x40000000>; };
- soc { - #address-cells = <2>; - #size-cells = <2>; - compatible = "andestech,riscv-ae350-soc"; - ranges; + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "andestech,riscv-ae350-soc"; + ranges; };
- plmt0@e6000000 { - compatible = "riscv,plmt0"; - interrupts-extended = <&CPU0_intc 7>; - reg = <0x0 0xe6000000 0x0 0x100000>; - }; + plmt0@e6000000 { + compatible = "riscv,plmt0"; + interrupts-extended = <&CPU0_intc 7>; + reg = <0x0 0xe6000000 0x0 0x100000>; + };
- plic0: interrupt-controller@e4000000 { - compatible = "riscv,plic0"; - #address-cells = <2>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x0 0xe4000000 0x0 0x2000000>; - riscv,ndev=<31>; - interrupts-extended = <&CPU0_intc 11 &CPU0_intc 9>; + plic0: interrupt-controller@e4000000 { + compatible = "riscv,plic0"; + #address-cells = <2>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x0 0xe4000000 0x0 0x2000000>; + riscv,ndev=<31>; + interrupts-extended = <&CPU0_intc 11 &CPU0_intc 9>; };
- plic1: interrupt-controller@e6400000 { - compatible = "riscv,plic1"; - #address-cells = <2>; - #interrupt-cells = <2>; + plic1: interrupt-controller@e6400000 { + compatible = "riscv,plic1"; + #address-cells = <2>; + #interrupt-cells = <2>; interrupt-controller; - reg = <0x0 0xe6400000 0x0 0x400000>; - riscv,ndev=<1>; - interrupts-extended = <&CPU0_intc 3>; - }; + reg = <0x0 0xe6400000 0x0 0x400000>; + riscv,ndev=<1>; + interrupts-extended = <&CPU0_intc 3>; + };
- spiclk: virt_100mhz { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; + spiclk: virt_100mhz { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + };
- timer0: timer@f0400000 { - compatible = "andestech,atcpit100"; - reg = <0x0 0xf0400000 0x0 0x1000>; - clock-frequency = <40000000>; - interrupts = <3 4>; - interrupt-parent = <&plic0>; + timer0: timer@f0400000 { + compatible = "andestech,atcpit100"; + reg = <0x0 0xf0400000 0x0 0x1000>; + clock-frequency = <40000000>; + interrupts = <3 4>; + interrupt-parent = <&plic0>; };
serial0: serial@f0300000 { compatible = "andestech,uart16550", "ns16550a"; - reg = <0x0 0xf0300000 0x0 0x1000>; - interrupts = <9 4>; + reg = <0x0 0xf0300000 0x0 0x1000>; + interrupts = <9 4>; clock-frequency = <19660800>; reg-shift = <2>; reg-offset = <32>; no-loopback-test = <1>; - interrupt-parent = <&plic0>; + interrupt-parent = <&plic0>; };
mac0: mac@e0100000 { compatible = "andestech,atmac100"; - reg = <0x0 0xe0100000 0x0 0x1000>; - interrupts = <19 4>; - interrupt-parent = <&plic0>; + reg = <0x0 0xe0100000 0x0 0x1000>; + interrupts = <19 4>; + interrupt-parent = <&plic0>; };
mmc0: mmc@f0e00000 { - compatible = "andestech,atfsdc010"; + compatible = "andestech,atfsdc010"; max-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + clock-freq-min-max = <400000 100000000>; fifo-depth = <0x10>; - reg = <0x0 0xf0e00000 0x0 0x1000>; - interrupts = <18 4>; + reg = <0x0 0xf0e00000 0x0 0x1000>; + interrupts = <18 4>; cap-sd-highspeed; - interrupt-parent = <&plic0>; + interrupt-parent = <&plic0>; };
- smc0: smc@e0400000 { - compatible = "andestech,atfsmc020"; - reg = <0x0 0xe0400000 0x0 0x1000>; - }; + smc0: smc@e0400000 { + compatible = "andestech,atfsmc020"; + reg = <0x0 0xe0400000 0x0 0x1000>; + };
- nor@0,0 { - compatible = "cfi-flash"; - reg = <0x0 0x88000000 0x0 0x1000>; - bank-width = <2>; - device-width = <1>; - }; + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x88000000 0x0 0x1000>; + bank-width = <2>; + device-width = <1>; + };
spi: spi@f0b00000 { compatible = "andestech,atcspi200"; - reg = <0x0 0xf0b00000 0x0 0x1000>; + reg = <0x0 0xf0b00000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; num-cs = <1>; clocks = <&spiclk>; interrupts = <3 4>; - interrupt-parent = <&plic0>; - flash@0 { + interrupt-parent = <&plic0>; + + flash@0 { compatible = "spi-flash"; spi-max-frequency = <50000000>; reg = <0>;
RISC-V is a pretty new architecture and should support DM and OF_CONTROL by default.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de ---
Changes in v3: None Changes in v2: None
arch/Kconfig | 3 +++ configs/ax25-ae350_defconfig | 2 -- 2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig index cd424fd..e62c3cb 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -62,6 +62,9 @@ config PPC config RISCV bool "RISC-V architecture" select SUPPORT_OF_CONTROL + select OF_CONTROL + select DM + imply CMD_DM
config SANDBOX bool "Sandbox" diff --git a/configs/ax25-ae350_defconfig b/configs/ax25-ae350_defconfig index d64f078..ebcc52e 100644 --- a/configs/ax25-ae350_defconfig +++ b/configs/ax25-ae350_defconfig @@ -15,12 +15,10 @@ CONFIG_CMD_SF_TEST=y # CONFIG_CMD_SETEXPR is not set CONFIG_BOOTP_PREFER_SERVERIP=y CONFIG_CMD_CACHE=y -CONFIG_OF_CONTROL=y CONFIG_OF_BOARD=y CONFIG_DEFAULT_DEVICE_TREE="ae350" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_DM=y CONFIG_CLK=y CONFIG_MMC=y CONFIG_DM_MMC=y
This implies DM support for some common drivers that are used on RISC-V.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
---
Changes in v3: - new patch to imply DM support for some common drivers
Changes in v2: None
arch/Kconfig | 9 +++++++++ configs/ax25-ae350_defconfig | 8 -------- 2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig index e62c3cb..ce183fa 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -64,6 +64,15 @@ config RISCV select SUPPORT_OF_CONTROL select OF_CONTROL select DM + imply DM_SERIAL + imply DM_ETH + imply DM_MMC + imply DM_SPI + imply DM_SPI_FLASH + imply BLK + imply CLK + imply MTD + imply TIMER imply CMD_DM
config SANDBOX diff --git a/configs/ax25-ae350_defconfig b/configs/ax25-ae350_defconfig index ebcc52e..614ef15 100644 --- a/configs/ax25-ae350_defconfig +++ b/configs/ax25-ae350_defconfig @@ -19,24 +19,16 @@ CONFIG_OF_BOARD=y CONFIG_DEFAULT_DEVICE_TREE="ae350" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_CLK=y CONFIG_MMC=y -CONFIG_DM_MMC=y CONFIG_FTSDC010=y CONFIG_FTSDC010_SDIO=y -CONFIG_MTD=y CONFIG_MTD_NOR_FLASH=y CONFIG_CFI_FLASH=y -CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_DM_ETH=y CONFIG_FTMAC100=y CONFIG_BAUDRATE=38400 -CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_SPI=y -CONFIG_DM_SPI=y CONFIG_ATCSPI200_SPI=y -CONFIG_TIMER=y CONFIG_ATCPIT100_TIMER=y
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
This implies DM support for some common drivers that are used on RISC-V.
Signed-off-by: Bin Meng bmeng.cn@gmail.com
Changes in v3:
- new patch to imply DM support for some common drivers
Changes in v2: None
arch/Kconfig | 9 +++++++++ configs/ax25-ae350_defconfig | 8 -------- 2 files changed, 9 insertions(+), 8 deletions(-)
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
This adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
The QEMU virt machine models a generic RISC-V virtual machine with support for the VirtIO standard networking and block storage devices. It has CLINT, PLIC, 16550A UART devices in addition to VirtIO and it also uses device-tree to pass configuration information to guest software. It implements RISC-V privileged architecture spec v1.10.
Both 32-bit and 64-bit builds are supported. Support is pretty much preliminary, only booting to U-Boot shell with the UART driver on a single core. Booting Linux is not supported yet.
Signed-off-by: Bin Meng bmeng.cn@gmail.com Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
---
Changes in v3: None Changes in v2: None
arch/riscv/Kconfig | 4 +++ arch/riscv/cpu/qemu/Makefile | 6 +++++ arch/riscv/cpu/qemu/cpu.c | 29 +++++++++++++++++++++ arch/riscv/cpu/qemu/dram.c | 17 ++++++++++++ board/emulation/qemu-riscv/Kconfig | 22 ++++++++++++++++ board/emulation/qemu-riscv/MAINTAINERS | 7 +++++ board/emulation/qemu-riscv/Makefile | 5 ++++ board/emulation/qemu-riscv/qemu-riscv.c | 23 +++++++++++++++++ configs/qemu-riscv32_defconfig | 6 +++++ configs/qemu-riscv64_defconfig | 7 +++++ doc/README.qemu-riscv | 46 +++++++++++++++++++++++++++++++++ include/configs/qemu-riscv.h | 21 +++++++++++++++ 12 files changed, 193 insertions(+) create mode 100644 arch/riscv/cpu/qemu/Makefile create mode 100644 arch/riscv/cpu/qemu/cpu.c create mode 100644 arch/riscv/cpu/qemu/dram.c create mode 100644 board/emulation/qemu-riscv/Kconfig create mode 100644 board/emulation/qemu-riscv/MAINTAINERS create mode 100644 board/emulation/qemu-riscv/Makefile create mode 100644 board/emulation/qemu-riscv/qemu-riscv.c create mode 100644 configs/qemu-riscv32_defconfig create mode 100644 configs/qemu-riscv64_defconfig create mode 100644 doc/README.qemu-riscv create mode 100644 include/configs/qemu-riscv.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index 49f87de..168ca3d 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -11,9 +11,13 @@ choice config TARGET_AX25_AE350 bool "Support ax25-ae350"
+config TARGET_QEMU_VIRT + bool "Support QEMU Virt Board" + endchoice
source "board/AndesTech/ax25-ae350/Kconfig" +source "board/emulation/qemu-riscv/Kconfig"
choice prompt "CPU selection" diff --git a/arch/riscv/cpu/qemu/Makefile b/arch/riscv/cpu/qemu/Makefile new file mode 100644 index 0000000..258e462 --- /dev/null +++ b/arch/riscv/cpu/qemu/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + +obj-y += dram.o +obj-y += cpu.o diff --git a/arch/riscv/cpu/qemu/cpu.c b/arch/riscv/cpu/qemu/cpu.c new file mode 100644 index 0000000..a064639 --- /dev/null +++ b/arch/riscv/cpu/qemu/cpu.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#include <common.h> +#include <command.h> + +/* + * cleanup_before_linux() is called just before we call linux + * it prepares the processor for linux + * + * we disable interrupt and caches. + */ +int cleanup_before_linux(void) +{ + disable_interrupts(); + + /* turn off I/D-cache */ + + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + printf("reset unsupported yet\n"); + + return 0; +} diff --git a/arch/riscv/cpu/qemu/dram.c b/arch/riscv/cpu/qemu/dram.c new file mode 100644 index 0000000..84d87d2 --- /dev/null +++ b/arch/riscv/cpu/qemu/dram.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#include <common.h> +#include <fdtdec.h> + +int dram_init(void) +{ + return fdtdec_setup_mem_size_base(); +} + +int dram_init_banksize(void) +{ + return fdtdec_setup_memory_banksize(); +} diff --git a/board/emulation/qemu-riscv/Kconfig b/board/emulation/qemu-riscv/Kconfig new file mode 100644 index 0000000..af23363 --- /dev/null +++ b/board/emulation/qemu-riscv/Kconfig @@ -0,0 +1,22 @@ +if TARGET_QEMU_VIRT + +config SYS_BOARD + default "qemu-riscv" + +config SYS_VENDOR + default "emulation" + +config SYS_CPU + default "qemu" + +config SYS_CONFIG_NAME + default "qemu-riscv" + +config SYS_TEXT_BASE + default 0x80000000 + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + imply SYS_NS16550 + +endif diff --git a/board/emulation/qemu-riscv/MAINTAINERS b/board/emulation/qemu-riscv/MAINTAINERS new file mode 100644 index 0000000..3c6eb4f --- /dev/null +++ b/board/emulation/qemu-riscv/MAINTAINERS @@ -0,0 +1,7 @@ +QEMU RISC-V 'VIRT' BOARD +M: Bin Meng bmeng.cn@gmail.com +S: Maintained +F: board/emulation/qemu-riscv/ +F: include/configs/qemu-riscv.h +F: configs/qemu-riscv32_defconfig +F: configs/qemu-riscv64_defconfig diff --git a/board/emulation/qemu-riscv/Makefile b/board/emulation/qemu-riscv/Makefile new file mode 100644 index 0000000..3f29b90 --- /dev/null +++ b/board/emulation/qemu-riscv/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + +obj-y += qemu-riscv.o diff --git a/board/emulation/qemu-riscv/qemu-riscv.c b/board/emulation/qemu-riscv/qemu-riscv.c new file mode 100644 index 0000000..041e716 --- /dev/null +++ b/board/emulation/qemu-riscv/qemu-riscv.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#include <common.h> +#include <fdtdec.h> + +#define MROM_FDT_ADDR 0x1020 + +int board_init(void) +{ + return 0; +} + +void *board_fdt_blob_setup(void) +{ + /* + * QEMU loads a generated DTB for us immediately + * after the reset vectors in the MROM + */ + return (void *)MROM_FDT_ADDR; +} diff --git a/configs/qemu-riscv32_defconfig b/configs/qemu-riscv32_defconfig new file mode 100644 index 0000000..ff1fb1f --- /dev/null +++ b/configs/qemu-riscv32_defconfig @@ -0,0 +1,6 @@ +CONFIG_RISCV=y +CONFIG_TARGET_QEMU_VIRT=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_OF_BOARD=y diff --git a/configs/qemu-riscv64_defconfig b/configs/qemu-riscv64_defconfig new file mode 100644 index 0000000..d6c1a5d --- /dev/null +++ b/configs/qemu-riscv64_defconfig @@ -0,0 +1,7 @@ +CONFIG_RISCV=y +CONFIG_TARGET_QEMU_VIRT=y +CONFIG_CPU_RISCV_64=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DISPLAY_BOARDINFO=y +CONFIG_OF_BOARD=y diff --git a/doc/README.qemu-riscv b/doc/README.qemu-riscv new file mode 100644 index 0000000..e2e4804 --- /dev/null +++ b/doc/README.qemu-riscv @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + +U-Boot on QEMU's 'virt' machine on RISC-V +========================================= + +QEMU for RISC-V supports a special 'virt' machine designed for emulation and +virtualization purposes. This document describes how to run U-Boot under it. +Both 32-bit 64-bit targets are supported. + +The QEMU virt machine models a generic RISC-V virtual machine with support for +the VirtIO standard networking and block storage devices. It has CLINT, PLIC, +16550A UART devices in addition to VirtIO and it also uses device-tree to pass +configuration information to guest software. It implements RISC-V privileged +architecture spec v1.10. + +Building U-Boot +--------------- +Set the CROSS_COMPILE environment variable as usual, and run: + +- For 32-bit RISC-V: + make qemu-riscv32_defconfig + make + +- For 64-bit RISC-V: + make qemu-riscv64_defconfig + make + +Running U-Boot +-------------- +The minimal QEMU command line to get U-Boot up and running is: + +- For 32-bit RISC-V: + qemu-system-riscv32 -nographic -machine virt -kernel u-boot + +- For 64-bit RISC-V: + qemu-system-riscv64 -nographic -machine virt -kernel u-boot + +The commands above create targets with 128MiB memory by default. +A freely configurable amount of RAM can be created via the '-m' +parameter. For example, '-m 2G' creates 2GiB memory for the target, +and the memory node in the embedded DTB created by QEMU reflects +the new setting. + +These have been tested in QEMU 3.0.0. diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h new file mode 100644 index 0000000..d279c23 --- /dev/null +++ b/include/configs/qemu-riscv.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/sizes.h> + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) + +#define CONFIG_SYS_MALLOC_LEN SZ_8M + +/* Environment options */ +#define CONFIG_ENV_SIZE SZ_4K + +#endif /* __CONFIG_H */
We don't have a reset method on any RISC-V board yet. Instead of adding the same 'unsupported' message for each CPU variant it might make more sense to add a generic do_reset function for all CPU variants to lib/, similar to the one for ARM (arch/arm/lib/reset.c).
Suggested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Signed-off-by: Bin Meng bmeng.cn@gmail.com
---
Changes in v3: - reword the reset message a little, and call hang() in the end
Changes in v2: - new patch to move do_reset() to a common place
arch/riscv/cpu/ax25/cpu.c | 9 --------- arch/riscv/cpu/qemu/cpu.c | 8 -------- arch/riscv/lib/Makefile | 1 + arch/riscv/lib/reset.c | 17 +++++++++++++++++ 4 files changed, 18 insertions(+), 17 deletions(-) create mode 100644 arch/riscv/lib/reset.c
diff --git a/arch/riscv/cpu/ax25/cpu.c b/arch/riscv/cpu/ax25/cpu.c index ab05b57..fddcc15 100644 --- a/arch/riscv/cpu/ax25/cpu.c +++ b/arch/riscv/cpu/ax25/cpu.c @@ -6,9 +6,6 @@
/* CPU specific code */ #include <common.h> -#include <command.h> -#include <watchdog.h> -#include <asm/cache.h>
/* * cleanup_before_linux() is called just before we call linux @@ -24,9 +21,3 @@ int cleanup_before_linux(void)
return 0; } - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - disable_interrupts(); - panic("ax25-ae350 wdt not support yet.\n"); -} diff --git a/arch/riscv/cpu/qemu/cpu.c b/arch/riscv/cpu/qemu/cpu.c index a064639..6c7a327 100644 --- a/arch/riscv/cpu/qemu/cpu.c +++ b/arch/riscv/cpu/qemu/cpu.c @@ -4,7 +4,6 @@ */
#include <common.h> -#include <command.h>
/* * cleanup_before_linux() is called just before we call linux @@ -20,10 +19,3 @@ int cleanup_before_linux(void)
return 0; } - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - printf("reset unsupported yet\n"); - - return 0; -} diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index cc562f9..b58db89 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o obj-y += interrupts.o +obj-y += reset.o obj-y += setjmp.o
# For building EFI apps diff --git a/arch/riscv/lib/reset.c b/arch/riscv/lib/reset.c new file mode 100644 index 0000000..a6aa8e2 --- /dev/null +++ b/arch/riscv/lib/reset.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com + */ + +#include <common.h> +#include <command.h> + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + printf("resetting ...\n"); + + printf("reset unsupported yet\n"); + hang(); + + return 0; +}
Hi Bin,
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
We don't have a reset method on any RISC-V board yet. Instead of adding the same 'unsupported' message for each CPU variant it might make more sense to add a generic do_reset function for all CPU variants to lib/, similar to the one for ARM (arch/arm/lib/reset.c).
Suggested-by: Lukas Auer lukas.auer@aisec.fraunhofer.de Signed-off-by: Bin Meng bmeng.cn@gmail.com
Changes in v3:
- reword the reset message a little, and call hang() in the end
Changes in v2:
- new patch to move do_reset() to a common place
arch/riscv/cpu/ax25/cpu.c | 9 --------- arch/riscv/cpu/qemu/cpu.c | 8 -------- arch/riscv/lib/Makefile | 1 + arch/riscv/lib/reset.c | 17 +++++++++++++++++ 4 files changed, 18 insertions(+), 17 deletions(-) create mode 100644 arch/riscv/lib/reset.c
diff --git a/arch/riscv/cpu/ax25/cpu.c b/arch/riscv/cpu/ax25/cpu.c index ab05b57..fddcc15 100644 --- a/arch/riscv/cpu/ax25/cpu.c +++ b/arch/riscv/cpu/ax25/cpu.c @@ -6,9 +6,6 @@
/* CPU specific code */ #include <common.h> -#include <command.h> -#include <watchdog.h> -#include <asm/cache.h>
/*
- cleanup_before_linux() is called just before we call linux
@@ -24,9 +21,3 @@ int cleanup_before_linux(void)
return 0; }
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{
- disable_interrupts();
- panic("ax25-ae350 wdt not support yet.\n");
-} diff --git a/arch/riscv/cpu/qemu/cpu.c b/arch/riscv/cpu/qemu/cpu.c index a064639..6c7a327 100644 --- a/arch/riscv/cpu/qemu/cpu.c +++ b/arch/riscv/cpu/qemu/cpu.c @@ -4,7 +4,6 @@ */
#include <common.h> -#include <command.h>
/*
- cleanup_before_linux() is called just before we call linux
@@ -20,10 +19,3 @@ int cleanup_before_linux(void)
return 0; }
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{
- printf("reset unsupported yet\n");
- return 0;
-} diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index cc562f9..b58db89 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-$(CONFIG_CMD_GO) += boot.o obj-y += cache.o obj-y += interrupts.o +obj-y += reset.o obj-y += setjmp.o
# For building EFI apps diff --git a/arch/riscv/lib/reset.c b/arch/riscv/lib/reset.c new file mode 100644 index 0000000..a6aa8e2 --- /dev/null +++ b/arch/riscv/lib/reset.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- Copyright (C) 2018, Bin Meng bmeng.cn@gmail.com
- */
+#include <common.h> +#include <command.h>
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{
- printf("resetting ...\n");
- printf("reset unsupported yet\n");
- hang();
- return 0;
+}
Reviewed-by: Lukas Auer lukas.auer@aisec.fraunhofer.de
Small nit here. The Sentence "reset unsupported yet" is not grammatically correct and should say "reset not supported yet" instead.
Everything else looks great, so it probably doesn't make sense to resend the whole series to fix this.
Thanks, Lukas
Hi Rick,
On Wed, Sep 26, 2018 at 9:50 PM Bin Meng bmeng.cn@gmail.com wrote:
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
- new patch to imply DM support for some common drivers
- reword the reset message a little, and call hang() in the end
Changes in v2:
- Change Linux kernel entry parameters' type to support 32/64 bit
- new patch to remove CSR read/write defines in encoding.h
- new patch to pass mhartid CSR value to kernel
- new patch to move do_reset() to a common place
Any comments for v3?
Regards, Bin
On Fri, Sep 28, 2018 at 10:10 AM Bin Meng bmeng.cn@gmail.com wrote:
Hi Rick,
On Wed, Sep 26, 2018 at 9:50 PM Bin Meng bmeng.cn@gmail.com wrote:
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
- new patch to imply DM support for some common drivers
- reword the reset message a little, and call hang() in the end
Changes in v2:
- Change Linux kernel entry parameters' type to support 32/64 bit
- new patch to remove CSR read/write defines in encoding.h
- new patch to pass mhartid CSR value to kernel
- new patch to move do_reset() to a common place
Any comments for v3?
Ping?
Hi Bin,
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
- new patch to imply DM support for some common drivers
- reword the reset message a little, and call hang() in the end
Changes in v2:
- Change Linux kernel entry parameters' type to support 32/64 bit
- new patch to remove CSR read/write defines in encoding.h
- new patch to pass mhartid CSR value to kernel
- new patch to move do_reset() to a common place
One more thing, I wanted to let you know about. I am already able to boot Linux in QEMU with this patch series, and u-boot master now. I had to make minor changes to the board config / environment to enable FIT images, though jumping directly to bbl + Linux with 'go' should work as well. I did modify QEMU slightly so that it also loads binaries instead of just ELF files. I am planning to start sending my patches to u-boot and QEMU next week.
Thanks, Lukas
Hi Lukas,
On Thu, Oct 4, 2018 at 12:45 AM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
Hi Bin,
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
- new patch to imply DM support for some common drivers
- reword the reset message a little, and call hang() in the end
Changes in v2:
- Change Linux kernel entry parameters' type to support 32/64 bit
- new patch to remove CSR read/write defines in encoding.h
- new patch to pass mhartid CSR value to kernel
- new patch to move do_reset() to a common place
One more thing, I wanted to let you know about. I am already able to boot Linux in QEMU with this patch series, and u-boot master now. I had to make minor changes to the board config / environment to enable FIT images, though jumping directly to bbl + Linux with 'go' should work as well.
Good to know.
I did modify QEMU slightly so that it also loads binaries instead of just ELF files. I am planning to start sending my patches to u-boot and QEMU next week.
Do you mean QEMU's -kernel parameter?
Regards, Bin
Hi Bin,
On Thu, 2018-10-04 at 15:01 +0800, Bin Meng wrote:
Hi Lukas,
On Thu, Oct 4, 2018 at 12:45 AM Auer, Lukas lukas.auer@aisec.fraunhofer.de wrote:
Hi Bin,
On Wed, 2018-09-26 at 06:55 -0700, Bin Meng wrote:
This series adds QEMU RISC-V 'virt' board target support, with the hope of helping people easily test U-Boot on RISC-V.
Some existing RISC-V codes have been changed to make it easily to support new targets. Some spotted coding style issues are fixed.
This series is available at u-boot-x86/riscv-working for testing.
Changes in v3:
- net patch to print the relocation address in cmd 'bdinfo'
- new patch to imply DM support for some common drivers
- reword the reset message a little, and call hang() in the end
Changes in v2:
- Change Linux kernel entry parameters' type to support 32/64 bit
- new patch to remove CSR read/write defines in encoding.h
- new patch to pass mhartid CSR value to kernel
- new patch to move do_reset() to a common place
One more thing, I wanted to let you know about. I am already able to boot Linux in QEMU with this patch series, and u-boot master now. I had to make minor changes to the board config / environment to enable FIT images, though jumping directly to bbl + Linux with 'go' should work as well.
Good to know.
I did modify QEMU slightly so that it also loads binaries instead of just ELF files. I am planning to start sending my patches to u-boot and QEMU next week.
Do you mean QEMU's -kernel parameter?
Regards, Bin
Yes. I also modified the -bios parameter, though that's not strictly needed.
Thanks, Lukas
participants (2)
-
Auer, Lukas -
Bin Meng