Hi All,

I am using buildroot to create a cpio image. Following is the output.

Starting kernel ...

Uncompressing Linux............................................................................................ Linux version 2.6.24.4-default (tiju@tiju) (gcc version 4.2.1) #57 Tue Apr 15 08:58:38 IST 2008 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=00007177 Machine: DPB2440 Warning: bad configuration page, trying to continue Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz S3C24XX Clocks, (c) 2004 Simtec Electronics CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064 Kernel command line: root=/dev/ram0 rw console=ttySAC0,115200 irq: clearing pending ext status 00000b00 irq: clearing subpending status 00000003 irq: clearing subpending status 00000002 PID hash table entries: 64 (order: 6, 256 bytes) timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57 Console: colour dummy device 80x30 console [ttySAC0] enabled Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) Memory: 16MB = 16MB total Memory: 12620KB available (2184K code, 342K data, 1032K init) Security Framework initialized Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 64 bytes NET: Registered protocol family 16 S3C2440: Initialising architecture S3C2440: IRQ Support S3C2440: Clock Support, DVS off S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c1800000, irq 33 DMA channel 1 at c1800040, irq 34 DMA channel 2 at c1800080, irq 35 DMA channel 3 at c18000c0, irq 36 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: -1, 2048 bytes) TCP: Hash tables configured (established 512 bind 512) TCP reno registered audit: initializing netlink socket (disabled) audit(1.975:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 mice: PS/2 mouse device common for all mice S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Freeing init memory: 1032K

Thats it. Nothing else appears. Keyboard is active. What could be the problem?

Thanks in advance. Tiju

Best Jokes, Best Friends, Best Food and more. Go to http://in.promos.yahoo.com/groups/bestofyahoo/