--- ./drivers/rtl8139.c.orig 2007-10-12 22:17:52.000000000 +0800 +++ ./drivers/rtl8139.c 2007-10-12 22:39:21.170169464 +0800 @@ -76,6 +76,7 @@ #include <net.h> #include <asm/io.h> #include <pci.h> +#include <linux/byteorder/generic.h>

#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ defined(CONFIG_RTL8139) @@ -104,8 +105,8 @@ #undef DEBUG_RX

#define currticks() get_timer(0) -#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) -#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) +#define bus_to_phys(a) pci_io_to_phys((pci_dev_t)dev->priv, a) +#define phys_to_bus(a) pci_phys_to_io((pci_dev_t)dev->priv, a)

/* Symbolic offsets to registers. */ enum RTL8139_registers { @@ -213,7 +214,7 @@ if ((devno = pci_find_devices(supported, idx++)) < 0) break;

- pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + pci_read_config_dword(devno, PCI_BASE_ADDRESS_0, &iobase); iobase &= ~0xf;

debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase); @@ -254,8 +255,9 @@ outb(0x00, ioaddr + Config1);

addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6; - for (i = 0; i < 3; i++) - *ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len)); + //this doesn't work + //for (i = 0; i < 3; i++) + // *ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len));

speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10; fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex; @@ -338,7 +340,7 @@ unsigned int mc_filter[2]; int rx_mode; /* !IFF_PROMISC */ - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; mc_filter[1] = mc_filter[0] = 0xffffffff;

outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig); @@ -383,7 +385,7 @@ #ifdef DEBUG_RX printf("rx ring address is %X\n",(unsigned long)rx_ring); #endif - outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf); + outl((int)rx_ring, ioaddr + RxBuf);

/* If we add multicast support, the MAR0 register would have to be * initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot @@ -423,7 +425,7 @@ tx_buffer[len++] = '\0'; }

- outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4); + outl((int)tx_buffer, ioaddr + TxAddr0 + cur_tx*4); outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len, ioaddr + TxStatus0 + cur_tx*4);

@@ -480,7 +482,7 @@ #endif

ring_offs = cur_rx % RX_BUF_LEN; - rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs)); + rx_status = le32_to_cpu(*(unsigned int*)(rx_ring + ring_offs)); rx_size = rx_status >> 16; rx_status &= 0xffff; -------------- Lucas Jin