[U-Boot] [PATCH v5 0/5] add i.MX6 thermal sensor driver
This patch set adds i.MX6 thermal sensor driver and enables it for mx6sabre boards. Also adds various anadig bit definitions as required for upcoming drivers.
Changes in v5: -Don't modify the copyright of cpu.c and crm_regs.h file
Changes in v4: -Added imx6 thermal sensor as a driver -Renamed the config define to be more meaningful -Move the clock code to clock.c -Reusing ocotp driver for reading fuse -Fix check for calibration fuse not programmed -Aligned the slope computation with kernel -Added Anadig register defines as seperate commit
Changes in v3: -adds the mx6 thermal driver support -adds the mx6 thermal support to mx6sabresd board.
Changes in v2: -run checkpatch and fix reported issues
Nitin Garg (5): mx6: crm_regs: Add bit definitions for anadig registers mx6: clock: Add api to enable pll3 mx6: thermal: Add i.MX6 CPU thermal sensor support mx6: thermal: Check cpu temperature via thermal sensor mx6: thermal: Enable thermal sensor for mx6 sabre boards.
arch/arm/cpu/armv7/mx6/clock.c | 25 ++ arch/arm/imx-common/cpu.c | 6 + arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/crm_regs.h | 541 ++++++++++++++++++++++++++++++ drivers/Makefile | 1 + drivers/thermal/Makefile | 8 + drivers/thermal/imx_thermal.c | 137 ++++++++ include/configs/mx6sabre_common.h | 3 +- include/imx_thermal.h | 15 + 9 files changed, 736 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/imx_thermal.c create mode 100644 include/imx_thermal.h
Add bit definitons for various anadig registers as required by various drivers.
Signed-off-by: Nitin Garg nitin.garg@freescale.com ---
arch/arm/include/asm/arch-mx6/crm_regs.h | 541 ++++++++++++++++++++++++++++++ 1 file changed, 541 insertions(+)
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index e67b5b9..5c79d0f 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -1061,4 +1061,545 @@ struct mxc_ccm_reg { #define BF_ANADIG_PFD_528_PFD0_FRAC(v) \ (((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
+#define HW_ANADIG_REG_1P1 (0x00000110) +#define HW_ANADIG_REG_1P1_SET (0x00000114) +#define HW_ANADIG_REG_1P1_CLR (0x00000118) +#define HW_ANADIG_REG_1P1_TOG (0x0000011c) + +#define BP_ANADIG_REG_1P1_RSVD2 18 +#define BM_ANADIG_REG_1P1_RSVD2 0xFFFC0000 +#define BF_ANADIG_REG_1P1_RSVD2(v) \ + (((v) << 18) & BM_ANADIG_REG_1P1_RSVD2) +#define BM_ANADIG_REG_1P1_OK_VDD1P1 0x00020000 +#define BM_ANADIG_REG_1P1_BO_VDD1P1 0x00010000 +#define BP_ANADIG_REG_1P1_RSVD1 13 +#define BM_ANADIG_REG_1P1_RSVD1 0x0000E000 +#define BF_ANADIG_REG_1P1_RSVD1(v) \ + (((v) << 13) & BM_ANADIG_REG_1P1_RSVD1) +#define BP_ANADIG_REG_1P1_OUTPUT_TRG 8 +#define BM_ANADIG_REG_1P1_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_1P1_OUTPUT_TRG(v) \ + (((v) << 8) & BM_ANADIG_REG_1P1_OUTPUT_TRG) +#define BM_ANADIG_REG_1P1_RSVD0 0x00000080 +#define BP_ANADIG_REG_1P1_BO_OFFSET 4 +#define BM_ANADIG_REG_1P1_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_1P1_BO_OFFSET(v) \ + (((v) << 4) & BM_ANADIG_REG_1P1_BO_OFFSET) +#define BM_ANADIG_REG_1P1_ENABLE_PULLDOWN 0x00000008 +#define BM_ANADIG_REG_1P1_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_1P1_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_1P1_ENABLE_LINREG 0x00000001 + +#define HW_ANADIG_REG_3P0 (0x00000120) +#define HW_ANADIG_REG_3P0_SET (0x00000124) +#define HW_ANADIG_REG_3P0_CLR (0x00000128) +#define HW_ANADIG_REG_3P0_TOG (0x0000012c) + +#define BP_ANADIG_REG_3P0_RSVD2 18 +#define BM_ANADIG_REG_3P0_RSVD2 0xFFFC0000 +#define BF_ANADIG_REG_3P0_RSVD2(v) \ + (((v) << 18) & BM_ANADIG_REG_3P0_RSVD2) +#define BM_ANADIG_REG_3P0_OK_VDD3P0 0x00020000 +#define BM_ANADIG_REG_3P0_BO_VDD3P0 0x00010000 +#define BP_ANADIG_REG_3P0_RSVD1 13 +#define BM_ANADIG_REG_3P0_RSVD1 0x0000E000 +#define BF_ANADIG_REG_3P0_RSVD1(v) \ + (((v) << 13) & BM_ANADIG_REG_3P0_RSVD1) +#define BP_ANADIG_REG_3P0_OUTPUT_TRG 8 +#define BM_ANADIG_REG_3P0_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_3P0_OUTPUT_TRG(v) \ + (((v) << 8) & BM_ANADIG_REG_3P0_OUTPUT_TRG) +#define BM_ANADIG_REG_3P0_VBUS_SEL 0x00000080 +#define BP_ANADIG_REG_3P0_BO_OFFSET 4 +#define BM_ANADIG_REG_3P0_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_3P0_BO_OFFSET(v) \ + (((v) << 4) & BM_ANADIG_REG_3P0_BO_OFFSET) +#define BM_ANADIG_REG_3P0_RSVD0 0x00000008 +#define BM_ANADIG_REG_3P0_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_3P0_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_3P0_ENABLE_LINREG 0x00000001 + +#define HW_ANADIG_REG_2P5 (0x00000130) +#define HW_ANADIG_REG_2P5_SET (0x00000134) +#define HW_ANADIG_REG_2P5_CLR (0x00000138) +#define HW_ANADIG_REG_2P5_TOG (0x0000013c) + +#define BP_ANADIG_REG_2P5_RSVD2 19 +#define BM_ANADIG_REG_2P5_RSVD2 0xFFF80000 +#define BF_ANADIG_REG_2P5_RSVD2(v) \ + (((v) << 19) & BM_ANADIG_REG_2P5_RSVD2) +#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x00040000 +#define BM_ANADIG_REG_2P5_OK_VDD2P5 0x00020000 +#define BM_ANADIG_REG_2P5_BO_VDD2P5 0x00010000 +#define BP_ANADIG_REG_2P5_RSVD1 13 +#define BM_ANADIG_REG_2P5_RSVD1 0x0000E000 +#define BF_ANADIG_REG_2P5_RSVD1(v) \ + (((v) << 13) & BM_ANADIG_REG_2P5_RSVD1) +#define BP_ANADIG_REG_2P5_OUTPUT_TRG 8 +#define BM_ANADIG_REG_2P5_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_2P5_OUTPUT_TRG(v) \ + (((v) << 8) & BM_ANADIG_REG_2P5_OUTPUT_TRG) +#define BM_ANADIG_REG_2P5_RSVD0 0x00000080 +#define BP_ANADIG_REG_2P5_BO_OFFSET 4 +#define BM_ANADIG_REG_2P5_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_2P5_BO_OFFSET(v) \ + (((v) << 4) & BM_ANADIG_REG_2P5_BO_OFFSET) +#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x00000008 +#define BM_ANADIG_REG_2P5_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_2P5_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_2P5_ENABLE_LINREG 0x00000001 + +#define HW_ANADIG_REG_CORE (0x00000140) +#define HW_ANADIG_REG_CORE_SET (0x00000144) +#define HW_ANADIG_REG_CORE_CLR (0x00000148) +#define HW_ANADIG_REG_CORE_TOG (0x0000014c) + +#define BM_ANADIG_REG_CORE_REF_SHIFT 0x80000000 +#define BM_ANADIG_REG_CORE_RSVD0 0x40000000 +#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 +#define BP_ANADIG_REG_CORE_RAMP_RATE 27 +#define BM_ANADIG_REG_CORE_RAMP_RATE 0x18000000 +#define BF_ANADIG_REG_CORE_RAMP_RATE(v) \ + (((v) << 27) & BM_ANADIG_REG_CORE_RAMP_RATE) +#define BP_ANADIG_REG_CORE_REG2_ADJ 23 +#define BM_ANADIG_REG_CORE_REG2_ADJ 0x07800000 +#define BF_ANADIG_REG_CORE_REG2_ADJ(v) \ + (((v) << 23) & BM_ANADIG_REG_CORE_REG2_ADJ) +#define BP_ANADIG_REG_CORE_REG2_TRG 18 +#define BM_ANADIG_REG_CORE_REG2_TRG 0x007C0000 +#define BF_ANADIG_REG_CORE_REG2_TRG(v) \ + (((v) << 18) & BM_ANADIG_REG_CORE_REG2_TRG) +#define BP_ANADIG_REG_CORE_REG1_ADJ 14 +#define BM_ANADIG_REG_CORE_REG1_ADJ 0x0003C000 +#define BF_ANADIG_REG_CORE_REG1_ADJ(v) \ + (((v) << 14) & BM_ANADIG_REG_CORE_REG1_ADJ) +#define BP_ANADIG_REG_CORE_REG1_TRG 9 +#define BM_ANADIG_REG_CORE_REG1_TRG 0x00003E00 +#define BF_ANADIG_REG_CORE_REG1_TRG(v) \ + (((v) << 9) & BM_ANADIG_REG_CORE_REG1_TRG) +#define BP_ANADIG_REG_CORE_REG0_ADJ 5 +#define BM_ANADIG_REG_CORE_REG0_ADJ 0x000001E0 +#define BF_ANADIG_REG_CORE_REG0_ADJ(v) \ + (((v) << 5) & BM_ANADIG_REG_CORE_REG0_ADJ) +#define BP_ANADIG_REG_CORE_REG0_TRG 0 +#define BM_ANADIG_REG_CORE_REG0_TRG 0x0000001F +#define BF_ANADIG_REG_CORE_REG0_TRG(v) \ + (((v) << 0) & BM_ANADIG_REG_CORE_REG0_TRG) + +#define HW_ANADIG_ANA_MISC0 (0x00000150) +#define HW_ANADIG_ANA_MISC0_SET (0x00000154) +#define HW_ANADIG_ANA_MISC0_CLR (0x00000158) +#define HW_ANADIG_ANA_MISC0_TOG (0x0000015c) + +#define BP_ANADIG_ANA_MISC0_RSVD2 29 +#define BM_ANADIG_ANA_MISC0_RSVD2 0xE0000000 +#define BF_ANADIG_ANA_MISC0_RSVD2(v) \ + (((v) << 29) & BM_ANADIG_ANA_MISC0_RSVD2) +#define BP_ANADIG_ANA_MISC0_CLKGATE_DELAY 26 +#define BM_ANADIG_ANA_MISC0_CLKGATE_DELAY 0x1C000000 +#define BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(v) \ + (((v) << 26) & BM_ANADIG_ANA_MISC0_CLKGATE_DELAY) +#define BM_ANADIG_ANA_MISC0_CLKGATE_CTRL 0x02000000 +#define BP_ANADIG_ANA_MISC0_ANAMUX 21 +#define BM_ANADIG_ANA_MISC0_ANAMUX 0x01E00000 +#define BF_ANADIG_ANA_MISC0_ANAMUX(v) \ + (((v) << 21) & BM_ANADIG_ANA_MISC0_ANAMUX) +#define BM_ANADIG_ANA_MISC0_ANAMUX_EN 0x00100000 +#define BP_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 18 +#define BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 0x000C0000 +#define BF_ANADIG_ANA_MISC0_WBCP_VPW_THRESH(v) \ + (((v) << 18) & BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH) +#define BM_ANADIG_ANA_MISC0_OSC_XTALOK_EN 0x00020000 +#define BM_ANADIG_ANA_MISC0_OSC_XTALOK 0x00010000 +#define BP_ANADIG_ANA_MISC0_OSC_I 14 +#define BM_ANADIG_ANA_MISC0_OSC_I 0x0000C000 +#define BF_ANADIG_ANA_MISC0_OSC_I(v) \ + (((v) << 14) & BM_ANADIG_ANA_MISC0_OSC_I) +#define BM_ANADIG_ANA_MISC0_RTC_RINGOSC_EN 0x00002000 +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x00001000 +#define BP_ANADIG_ANA_MISC0_RSVD0 10 +#define BM_ANADIG_ANA_MISC0_RSVD0 0x00000C00 +#define BF_ANADIG_ANA_MISC0_RSVD0(v) \ + (((v) << 10) & BM_ANADIG_ANA_MISC0_RSVD0) +#define BP_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 8 +#define BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 0x00000300 +#define BF_ANADIG_ANA_MISC0_REFTOP_BIAS_TST(v) \ + (((v) << 8) & BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST) +#define BM_ANADIG_ANA_MISC0_REFTOP_VBGUP 0x00000080 +#define BP_ANADIG_ANA_MISC0_REFTOP_VBGADJ 4 +#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x00000070 +#define BF_ANADIG_ANA_MISC0_REFTOP_VBGADJ(v) \ + (((v) << 4) & BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ) +#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008 +#define BM_ANADIG_ANA_MISC0_REFTOP_LOWPOWER 0x00000004 +#define BM_ANADIG_ANA_MISC0_REFTOP_PWDVBGUP 0x00000002 +#define BM_ANADIG_ANA_MISC0_REFTOP_PWD 0x00000001 + +#define HW_ANADIG_ANA_MISC1 (0x00000160) +#define HW_ANADIG_ANA_MISC1_SET (0x00000164) +#define HW_ANADIG_ANA_MISC1_CLR (0x00000168) +#define HW_ANADIG_ANA_MISC1_TOG (0x0000016c) + +#define BM_ANADIG_ANA_MISC1_IRQ_DIG_BO 0x80000000 +#define BM_ANADIG_ANA_MISC1_IRQ_ANA_BO 0x40000000 +#define BM_ANADIG_ANA_MISC1_IRQ_TEMPSENSE_BO 0x20000000 +#define BP_ANADIG_ANA_MISC1_RSVD0 14 +#define BM_ANADIG_ANA_MISC1_RSVD0 0x1FFFC000 +#define BF_ANADIG_ANA_MISC1_RSVD0(v) \ + (((v) << 14) & BM_ANADIG_ANA_MISC1_RSVD0) +#define BM_ANADIG_ANA_MISC1_LVDSCLK2_IBEN 0x00002000 +#define BM_ANADIG_ANA_MISC1_LVDSCLK1_IBEN 0x00001000 +#define BM_ANADIG_ANA_MISC1_LVDSCLK2_OBEN 0x00000800 +#define BM_ANADIG_ANA_MISC1_LVDSCLK1_OBEN 0x00000400 +#define BP_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 5 +#define BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 0x000003E0 +#define BF_ANADIG_ANA_MISC1_LVDS2_CLK_SEL(v) \ + (((v) << 5) & BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL) +#define BP_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0 +#define BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0x0000001F +#define BF_ANADIG_ANA_MISC1_LVDS1_CLK_SEL(v) \ + (((v) << 0) & BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL) + +#define HW_ANADIG_ANA_MISC2 (0x00000170) +#define HW_ANADIG_ANA_MISC2_SET (0x00000174) +#define HW_ANADIG_ANA_MISC2_CLR (0x00000178) +#define HW_ANADIG_ANA_MISC2_TOG (0x0000017c) + +#define BP_ANADIG_ANA_MISC2_CONTROL3 30 +#define BM_ANADIG_ANA_MISC2_CONTROL3 0xC0000000 +#define BF_ANADIG_ANA_MISC2_CONTROL3(v) \ + (((v) << 30) & BM_ANADIG_ANA_MISC2_CONTROL3) +#define BP_ANADIG_ANA_MISC2_REG2_STEP_TIME 28 +#define BM_ANADIG_ANA_MISC2_REG2_STEP_TIME 0x30000000 +#define BF_ANADIG_ANA_MISC2_REG2_STEP_TIME(v) \ + (((v) << 28) & BM_ANADIG_ANA_MISC2_REG2_STEP_TIME) +#define BP_ANADIG_ANA_MISC2_REG1_STEP_TIME 26 +#define BM_ANADIG_ANA_MISC2_REG1_STEP_TIME 0x0C000000 +#define BF_ANADIG_ANA_MISC2_REG1_STEP_TIME(v) \ + (((v) << 26) & BM_ANADIG_ANA_MISC2_REG1_STEP_TIME) +#define BP_ANADIG_ANA_MISC2_REG0_STEP_TIME 24 +#define BM_ANADIG_ANA_MISC2_REG0_STEP_TIME 0x03000000 +#define BF_ANADIG_ANA_MISC2_REG0_STEP_TIME(v) \ + (((v) << 24) & BM_ANADIG_ANA_MISC2_REG0_STEP_TIME) +#define BM_ANADIG_ANA_MISC2_CONTROL2 0x00800000 +#define BM_ANADIG_ANA_MISC2_REG2_OK 0x00400000 +#define BM_ANADIG_ANA_MISC2_REG2_ENABLE_BO 0x00200000 +#define BM_ANADIG_ANA_MISC2_RSVD2 0x00100000 +#define BM_ANADIG_ANA_MISC2_REG2_BO_STATUS 0x00080000 +#define BP_ANADIG_ANA_MISC2_REG2_BO_OFFSET 16 +#define BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET 0x00070000 +#define BF_ANADIG_ANA_MISC2_REG2_BO_OFFSET(v) \ + (((v) << 16) & BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET) +#define BM_ANADIG_ANA_MISC2_CONTROL1 0x00008000 +#define BM_ANADIG_ANA_MISC2_REG1_OK 0x00004000 +#define BM_ANADIG_ANA_MISC2_REG1_ENABLE_BO 0x00002000 +#define BM_ANADIG_ANA_MISC2_RSVD1 0x00001000 +#define BM_ANADIG_ANA_MISC2_REG1_BO_STATUS 0x00000800 +#define BP_ANADIG_ANA_MISC2_REG1_BO_OFFSET 8 +#define BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET 0x00000700 +#define BF_ANADIG_ANA_MISC2_REG1_BO_OFFSET(v) \ + (((v) << 8) & BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET) +#define BM_ANADIG_ANA_MISC2_CONTROL0 0x00000080 +#define BM_ANADIG_ANA_MISC2_REG0_OK 0x00000040 +#define BM_ANADIG_ANA_MISC2_REG0_ENABLE_BO 0x00000020 +#define BM_ANADIG_ANA_MISC2_RSVD0 0x00000010 +#define BM_ANADIG_ANA_MISC2_REG0_BO_STATUS 0x00000008 +#define BP_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0 +#define BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0x00000007 +#define BF_ANADIG_ANA_MISC2_REG0_BO_OFFSET(v) \ + (((v) << 0) & BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET) + +#define HW_ANADIG_TEMPSENSE0 (0x00000180) +#define HW_ANADIG_TEMPSENSE0_SET (0x00000184) +#define HW_ANADIG_TEMPSENSE0_CLR (0x00000188) +#define HW_ANADIG_TEMPSENSE0_TOG (0x0000018c) + +#define BP_ANADIG_TEMPSENSE0_ALARM_VALUE 20 +#define BM_ANADIG_TEMPSENSE0_ALARM_VALUE 0xFFF00000 +#define BF_ANADIG_TEMPSENSE0_ALARM_VALUE(v) \ + (((v) << 20) & BM_ANADIG_TEMPSENSE0_ALARM_VALUE) +#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8 +#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00 +#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v) \ + (((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE) +#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080 +#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040 +#define BP_ANADIG_TEMPSENSE0_VBGADJ 3 +#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038 +#define BF_ANADIG_TEMPSENSE0_VBGADJ(v) \ + (((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ) +#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004 +#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002 +#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001 + +#define HW_ANADIG_TEMPSENSE1 (0x00000190) +#define HW_ANADIG_TEMPSENSE1_SET (0x00000194) +#define HW_ANADIG_TEMPSENSE1_CLR (0x00000198) +#define HW_ANADIG_TEMPSENSE1_TOG (0x0000019c) + +#define BP_ANADIG_TEMPSENSE1_RSVD0 16 +#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000 +#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \ + (((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0) +#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0 +#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF +#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v) \ + (((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ) + +#define HW_ANADIG_USB1_VBUS_DETECT (0x000001a0) +#define HW_ANADIG_USB1_VBUS_DETECT_SET (0x000001a4) +#define HW_ANADIG_USB1_VBUS_DETECT_CLR (0x000001a8) +#define HW_ANADIG_USB1_VBUS_DETECT_TOG (0x000001ac) + +#define BM_ANADIG_USB1_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD2 28 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD2 0x70000000 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD2(v) \ + (((v) << 28) & BM_ANADIG_USB1_VBUS_DETECT_RSVD2) +#define BM_ANADIG_USB1_VBUS_DETECT_CHARGE_VBUS 0x08000000 +#define BM_ANADIG_USB1_VBUS_DETECT_DISCHARGE_VBUS 0x04000000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD1 21 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD1 0x03E00000 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD1(v) \ + (((v) << 21) & BM_ANADIG_USB1_VBUS_DETECT_RSVD1) +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_TO_B 0x00040000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD0 8 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD0 0x0003FF00 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD0(v) \ + (((v) << 8) & BM_ANADIG_USB1_VBUS_DETECT_RSVD0) +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_OVERRIDE 0x00000080 +#define BM_ANADIG_USB1_VBUS_DETECT_AVALID_OVERRIDE 0x00000040 +#define BM_ANADIG_USB1_VBUS_DETECT_BVALID_OVERRIDE 0x00000020 +#define BM_ANADIG_USB1_VBUS_DETECT_SESSEND_OVERRIDE 0x00000010 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUS_OVERRIDE_EN 0x00000008 +#define BP_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0x00000007 +#define BF_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v) \ + (((v) << 0) & BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH) + +#define HW_ANADIG_USB1_CHRG_DETECT (0x000001b0) +#define HW_ANADIG_USB1_CHRG_DETECT_SET (0x000001b4) +#define HW_ANADIG_USB1_CHRG_DETECT_CLR (0x000001b8) +#define HW_ANADIG_USB1_CHRG_DETECT_TOG (0x000001bc) + +#define BP_ANADIG_USB1_CHRG_DETECT_RSVD2 24 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD2 0xFF000000 +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD2(v) \ + (((v) << 24) & BM_ANADIG_USB1_CHRG_DETECT_RSVD2) +#define BM_ANADIG_USB1_CHRG_DETECT_BGR_BIAS 0x00800000 +#define BP_ANADIG_USB1_CHRG_DETECT_RSVD1 21 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD1 0x00600000 +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD1(v) \ + (((v) << 21) & BM_ANADIG_USB1_CHRG_DETECT_RSVD1) +#define BM_ANADIG_USB1_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B 0x00080000 +#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CONTACT 0x00040000 +#define BP_ANADIG_USB1_CHRG_DETECT_RSVD0 1 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD0 0x0003FFFE +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD0(v) \ + (((v) << 1) & BM_ANADIG_USB1_CHRG_DETECT_RSVD0) +#define BM_ANADIG_USB1_CHRG_DETECT_FORCE_DETECT 0x00000001 + +#define HW_ANADIG_USB1_VBUS_DET_STAT (0x000001c0) +#define HW_ANADIG_USB1_VBUS_DET_STAT_SET (0x000001c4) +#define HW_ANADIG_USB1_VBUS_DET_STAT_CLR (0x000001c8) +#define HW_ANADIG_USB1_VBUS_DET_STAT_TOG (0x000001cc) + +#define BP_ANADIG_USB1_VBUS_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB1_VBUS_DET_STAT_RSVD0(v) \ + (((v) << 4) & BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0) +#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID 0x00000008 +#define BM_ANADIG_USB1_VBUS_DET_STAT_AVALID 0x00000004 +#define BM_ANADIG_USB1_VBUS_DET_STAT_BVALID 0x00000002 +#define BM_ANADIG_USB1_VBUS_DET_STAT_SESSEND 0x00000001 + +#define HW_ANADIG_USB1_CHRG_DET_STAT (0x000001d0) +#define HW_ANADIG_USB1_CHRG_DET_STAT_SET (0x000001d4) +#define HW_ANADIG_USB1_CHRG_DET_STAT_CLR (0x000001d8) +#define HW_ANADIG_USB1_CHRG_DET_STAT_TOG (0x000001dc) + +#define BP_ANADIG_USB1_CHRG_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB1_CHRG_DET_STAT_RSVD0(v) \ + (((v) << 4) & BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0) +#define BM_ANADIG_USB1_CHRG_DET_STAT_DP_STATE 0x00000008 +#define BM_ANADIG_USB1_CHRG_DET_STAT_DM_STATE 0x00000004 +#define BM_ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED 0x00000002 +#define BM_ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT 0x00000001 + +#define HW_ANADIG_USB1_LOOPBACK (0x000001e0) +#define HW_ANADIG_USB1_LOOPBACK_SET (0x000001e4) +#define HW_ANADIG_USB1_LOOPBACK_CLR (0x000001e8) +#define HW_ANADIG_USB1_LOOPBACK_TOG (0x000001ec) + +#define BP_ANADIG_USB1_LOOPBACK_RSVD0 9 +#define BM_ANADIG_USB1_LOOPBACK_RSVD0 0xFFFFFE00 +#define BF_ANADIG_USB1_LOOPBACK_RSVD0(v) \ + (((v) << 9) & BM_ANADIG_USB1_LOOPBACK_RSVD0) +#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST1 0x00000100 +#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST0 0x00000080 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HIZ 0x00000040 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN 0x00000020 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_LS_MODE 0x00000010 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HS_MODE 0x00000008 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 0x00000004 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST0 0x00000002 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_TESTSTART 0x00000001 + +#define HW_ANADIG_USB1_MISC (0x000001f0) +#define HW_ANADIG_USB1_MISC_SET (0x000001f4) +#define HW_ANADIG_USB1_MISC_CLR (0x000001f8) +#define HW_ANADIG_USB1_MISC_TOG (0x000001fc) + +#define BM_ANADIG_USB1_MISC_RSVD1 0x80000000 +#define BM_ANADIG_USB1_MISC_EN_CLK_UTMI 0x40000000 +#define BM_ANADIG_USB1_MISC_RX_VPIN_FS 0x20000000 +#define BM_ANADIG_USB1_MISC_RX_VMIN_FS 0x10000000 +#define BM_ANADIG_USB1_MISC_RX_RXD_FS 0x08000000 +#define BM_ANADIG_USB1_MISC_RX_SQUELCH 0x04000000 +#define BM_ANADIG_USB1_MISC_RX_DISCON_DET 0x02000000 +#define BM_ANADIG_USB1_MISC_RX_HS_DATA 0x01000000 +#define BP_ANADIG_USB1_MISC_RSVD0 2 +#define BM_ANADIG_USB1_MISC_RSVD0 0x00FFFFFC +#define BF_ANADIG_USB1_MISC_RSVD0(v) \ + (((v) << 2) & BM_ANADIG_USB1_MISC_RSVD0) +#define BM_ANADIG_USB1_MISC_EN_DEGLITCH 0x00000002 +#define BM_ANADIG_USB1_MISC_HS_USE_EXTERNAL_R 0x00000001 + +#define HW_ANADIG_USB2_VBUS_DETECT (0x00000200) +#define HW_ANADIG_USB2_VBUS_DETECT_SET (0x00000204) +#define HW_ANADIG_USB2_VBUS_DETECT_CLR (0x00000208) +#define HW_ANADIG_USB2_VBUS_DETECT_TOG (0x0000020c) + +#define BM_ANADIG_USB2_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD2 28 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD2 0x70000000 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD2(v) \ + (((v) << 28) & BM_ANADIG_USB2_VBUS_DETECT_RSVD2) +#define BM_ANADIG_USB2_VBUS_DETECT_CHARGE_VBUS 0x08000000 +#define BM_ANADIG_USB2_VBUS_DETECT_DISCHARGE_VBUS 0x04000000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD1 21 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD1 0x03E00000 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD1(v) \ + (((v) << 21) & BM_ANADIG_USB2_VBUS_DETECT_RSVD1) +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_TO_B 0x00040000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD0 3 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD0 0x0003FFF8 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD0(v) \ + (((v) << 3) & BM_ANADIG_USB2_VBUS_DETECT_RSVD0) +#define BP_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0x00000007 +#define BF_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v) \ + (((v) << 0) & BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH) + +#define HW_ANADIG_USB2_CHRG_DETECT (0x00000210) +#define HW_ANADIG_USB2_CHRG_DETECT_SET (0x00000214) +#define HW_ANADIG_USB2_CHRG_DETECT_CLR (0x00000218) +#define HW_ANADIG_USB2_CHRG_DETECT_TOG (0x0000021c) + +#define BP_ANADIG_USB2_CHRG_DETECT_RSVD2 24 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD2 0xFF000000 +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD2(v) \ + (((v) << 24) & BM_ANADIG_USB2_CHRG_DETECT_RSVD2) +#define BM_ANADIG_USB2_CHRG_DETECT_BGR_BIAS 0x00800000 +#define BP_ANADIG_USB2_CHRG_DETECT_RSVD1 21 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD1 0x00600000 +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD1(v) \ + (((v) << 21) & BM_ANADIG_USB2_CHRG_DETECT_RSVD1) +#define BM_ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000 +#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CONTACT 0x00040000 +#define BP_ANADIG_USB2_CHRG_DETECT_RSVD0 1 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD0 0x0003FFFE +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD0(v) \ + (((v) << 1) & BM_ANADIG_USB2_CHRG_DETECT_RSVD0) +#define BM_ANADIG_USB2_CHRG_DETECT_FORCE_DETECT 0x00000001 + +#define HW_ANADIG_USB2_VBUS_DET_STAT (0x00000220) +#define HW_ANADIG_USB2_VBUS_DET_STAT_SET (0x00000224) +#define HW_ANADIG_USB2_VBUS_DET_STAT_CLR (0x00000228) +#define HW_ANADIG_USB2_VBUS_DET_STAT_TOG (0x0000022c) + +#define BP_ANADIG_USB2_VBUS_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB2_VBUS_DET_STAT_RSVD0(v) \ + (((v) << 4) & BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0) +#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID 0x00000008 +#define BM_ANADIG_USB2_VBUS_DET_STAT_AVALID 0x00000004 +#define BM_ANADIG_USB2_VBUS_DET_STAT_BVALID 0x00000002 +#define BM_ANADIG_USB2_VBUS_DET_STAT_SESSEND 0x00000001 + +#define HW_ANADIG_USB2_CHRG_DET_STAT (0x00000230) +#define HW_ANADIG_USB2_CHRG_DET_STAT_SET (0x00000234) +#define HW_ANADIG_USB2_CHRG_DET_STAT_CLR (0x00000238) +#define HW_ANADIG_USB2_CHRG_DET_STAT_TOG (0x0000023c) + +#define BP_ANADIG_USB2_CHRG_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB2_CHRG_DET_STAT_RSVD0(v) \ + (((v) << 4) & BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0) +#define BM_ANADIG_USB2_CHRG_DET_STAT_DP_STATE 0x00000008 +#define BM_ANADIG_USB2_CHRG_DET_STAT_DM_STATE 0x00000004 +#define BM_ANADIG_USB2_CHRG_DET_STAT_CHRG_DETECTED 0x00000002 +#define BM_ANADIG_USB2_CHRG_DET_STAT_PLUG_CONTACT 0x00000001 + +#define HW_ANADIG_USB2_LOOPBACK (0x00000240) +#define HW_ANADIG_USB2_LOOPBACK_SET (0x00000244) +#define HW_ANADIG_USB2_LOOPBACK_CLR (0x00000248) +#define HW_ANADIG_USB2_LOOPBACK_TOG (0x0000024c) + +#define BP_ANADIG_USB2_LOOPBACK_RSVD0 9 +#define BM_ANADIG_USB2_LOOPBACK_RSVD0 0xFFFFFE00 +#define BF_ANADIG_USB2_LOOPBACK_RSVD0(v) \ + (((v) << 9) & BM_ANADIG_USB2_LOOPBACK_RSVD0) +#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST1 0x00000100 +#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST0 0x00000080 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HIZ 0x00000040 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN 0x00000020 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_LS_MODE 0x00000010 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HS_MODE 0x00000008 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 0x00000004 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST0 0x00000002 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_TESTSTART 0x00000001 + +#define HW_ANADIG_USB2_MISC (0x00000250) +#define HW_ANADIG_USB2_MISC_SET (0x00000254) +#define HW_ANADIG_USB2_MISC_CLR (0x00000258) +#define HW_ANADIG_USB2_MISC_TOG (0x0000025c) + +#define BM_ANADIG_USB2_MISC_RSVD1 0x80000000 +#define BM_ANADIG_USB2_MISC_EN_CLK_UTMI 0x40000000 +#define BM_ANADIG_USB2_MISC_RX_VPIN_FS 0x20000000 +#define BM_ANADIG_USB2_MISC_RX_VMIN_FS 0x10000000 +#define BM_ANADIG_USB2_MISC_RX_RXD_FS 0x08000000 +#define BM_ANADIG_USB2_MISC_RX_SQUELCH 0x04000000 +#define BM_ANADIG_USB2_MISC_RX_DISCON_DET 0x02000000 +#define BM_ANADIG_USB2_MISC_RX_HS_DATA 0x01000000 +#define BP_ANADIG_USB2_MISC_RSVD0 2 +#define BM_ANADIG_USB2_MISC_RSVD0 0x00FFFFFC +#define BF_ANADIG_USB2_MISC_RSVD0(v) \ + (((v) << 2) & BM_ANADIG_USB2_MISC_RSVD0) +#define BM_ANADIG_USB2_MISC_EN_DEGLITCH 0x00000002 +#define BM_ANADIG_USB2_MISC_HS_USE_EXTERNAL_R 0x00000001 + +#define HW_ANADIG_DIGPROG (0x00000260) + +#define BP_ANADIG_DIGPROG_RSVD 24 +#define BM_ANADIG_DIGPROG_RSVD 0xFF000000 +#define BF_ANADIG_DIGPROG_RSVD(v) \ + (((v) << 24) & BM_ANADIG_DIGPROG_RSVD) +#define BP_ANADIG_DIGPROG_MAJOR 8 +#define BM_ANADIG_DIGPROG_MAJOR 0x00FFFF00 +#define BF_ANADIG_DIGPROG_MAJOR(v) \ + (((v) << 8) & BM_ANADIG_DIGPROG_MAJOR) +#define BP_ANADIG_DIGPROG_MINOR 0 +#define BM_ANADIG_DIGPROG_MINOR 0x000000FF +#define BF_ANADIG_DIGPROG_MINOR(v) \ + (((v) << 0) & BM_ANADIG_DIGPROG_MINOR) + #endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
Hi Nitin,
On 01/10/2014 14:41, Nitin Garg wrote:
Add bit definitons for various anadig registers as required by various drivers.
Signed-off-by: Nitin Garg nitin.garg@freescale.com
arch/arm/include/asm/arch-mx6/crm_regs.h | 541 ++++++++++++++++++++++++++++++ 1 file changed, 541 insertions(+)
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index e67b5b9..5c79d0f 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -1061,4 +1061,545 @@ struct mxc_ccm_reg { #define BF_ANADIG_PFD_528_PFD0_FRAC(v) \ (((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
+#define HW_ANADIG_REG_1P1 (0x00000110) +#define HW_ANADIG_REG_1P1_SET (0x00000114) +#define HW_ANADIG_REG_1P1_CLR (0x00000118) +#define HW_ANADIG_REG_1P1_TOG (0x0000011c)
+#define BP_ANADIG_REG_1P1_RSVD2 18 +#define BM_ANADIG_REG_1P1_RSVD2 0xFFFC0000 +#define BF_ANADIG_REG_1P1_RSVD2(v) \
- (((v) << 18) & BM_ANADIG_REG_1P1_RSVD2)
+#define BM_ANADIG_REG_1P1_OK_VDD1P1 0x00020000 +#define BM_ANADIG_REG_1P1_BO_VDD1P1 0x00010000 +#define BP_ANADIG_REG_1P1_RSVD1 13 +#define BM_ANADIG_REG_1P1_RSVD1 0x0000E000 +#define BF_ANADIG_REG_1P1_RSVD1(v) \
- (((v) << 13) & BM_ANADIG_REG_1P1_RSVD1)
+#define BP_ANADIG_REG_1P1_OUTPUT_TRG 8 +#define BM_ANADIG_REG_1P1_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_1P1_OUTPUT_TRG(v) \
- (((v) << 8) & BM_ANADIG_REG_1P1_OUTPUT_TRG)
+#define BM_ANADIG_REG_1P1_RSVD0 0x00000080 +#define BP_ANADIG_REG_1P1_BO_OFFSET 4 +#define BM_ANADIG_REG_1P1_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_1P1_BO_OFFSET(v) \
- (((v) << 4) & BM_ANADIG_REG_1P1_BO_OFFSET)
+#define BM_ANADIG_REG_1P1_ENABLE_PULLDOWN 0x00000008 +#define BM_ANADIG_REG_1P1_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_1P1_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_1P1_ENABLE_LINREG 0x00000001
+#define HW_ANADIG_REG_3P0 (0x00000120) +#define HW_ANADIG_REG_3P0_SET (0x00000124) +#define HW_ANADIG_REG_3P0_CLR (0x00000128) +#define HW_ANADIG_REG_3P0_TOG (0x0000012c)
+#define BP_ANADIG_REG_3P0_RSVD2 18 +#define BM_ANADIG_REG_3P0_RSVD2 0xFFFC0000 +#define BF_ANADIG_REG_3P0_RSVD2(v) \
- (((v) << 18) & BM_ANADIG_REG_3P0_RSVD2)
+#define BM_ANADIG_REG_3P0_OK_VDD3P0 0x00020000 +#define BM_ANADIG_REG_3P0_BO_VDD3P0 0x00010000 +#define BP_ANADIG_REG_3P0_RSVD1 13 +#define BM_ANADIG_REG_3P0_RSVD1 0x0000E000 +#define BF_ANADIG_REG_3P0_RSVD1(v) \
- (((v) << 13) & BM_ANADIG_REG_3P0_RSVD1)
+#define BP_ANADIG_REG_3P0_OUTPUT_TRG 8 +#define BM_ANADIG_REG_3P0_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_3P0_OUTPUT_TRG(v) \
- (((v) << 8) & BM_ANADIG_REG_3P0_OUTPUT_TRG)
+#define BM_ANADIG_REG_3P0_VBUS_SEL 0x00000080 +#define BP_ANADIG_REG_3P0_BO_OFFSET 4 +#define BM_ANADIG_REG_3P0_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_3P0_BO_OFFSET(v) \
- (((v) << 4) & BM_ANADIG_REG_3P0_BO_OFFSET)
+#define BM_ANADIG_REG_3P0_RSVD0 0x00000008 +#define BM_ANADIG_REG_3P0_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_3P0_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_3P0_ENABLE_LINREG 0x00000001
+#define HW_ANADIG_REG_2P5 (0x00000130) +#define HW_ANADIG_REG_2P5_SET (0x00000134) +#define HW_ANADIG_REG_2P5_CLR (0x00000138) +#define HW_ANADIG_REG_2P5_TOG (0x0000013c)
+#define BP_ANADIG_REG_2P5_RSVD2 19 +#define BM_ANADIG_REG_2P5_RSVD2 0xFFF80000 +#define BF_ANADIG_REG_2P5_RSVD2(v) \
- (((v) << 19) & BM_ANADIG_REG_2P5_RSVD2)
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x00040000 +#define BM_ANADIG_REG_2P5_OK_VDD2P5 0x00020000 +#define BM_ANADIG_REG_2P5_BO_VDD2P5 0x00010000 +#define BP_ANADIG_REG_2P5_RSVD1 13 +#define BM_ANADIG_REG_2P5_RSVD1 0x0000E000 +#define BF_ANADIG_REG_2P5_RSVD1(v) \
- (((v) << 13) & BM_ANADIG_REG_2P5_RSVD1)
+#define BP_ANADIG_REG_2P5_OUTPUT_TRG 8 +#define BM_ANADIG_REG_2P5_OUTPUT_TRG 0x00001F00 +#define BF_ANADIG_REG_2P5_OUTPUT_TRG(v) \
- (((v) << 8) & BM_ANADIG_REG_2P5_OUTPUT_TRG)
+#define BM_ANADIG_REG_2P5_RSVD0 0x00000080 +#define BP_ANADIG_REG_2P5_BO_OFFSET 4 +#define BM_ANADIG_REG_2P5_BO_OFFSET 0x00000070 +#define BF_ANADIG_REG_2P5_BO_OFFSET(v) \
- (((v) << 4) & BM_ANADIG_REG_2P5_BO_OFFSET)
+#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x00000008 +#define BM_ANADIG_REG_2P5_ENABLE_ILIMIT 0x00000004 +#define BM_ANADIG_REG_2P5_ENABLE_BO 0x00000002 +#define BM_ANADIG_REG_2P5_ENABLE_LINREG 0x00000001
+#define HW_ANADIG_REG_CORE (0x00000140) +#define HW_ANADIG_REG_CORE_SET (0x00000144) +#define HW_ANADIG_REG_CORE_CLR (0x00000148) +#define HW_ANADIG_REG_CORE_TOG (0x0000014c)
+#define BM_ANADIG_REG_CORE_REF_SHIFT 0x80000000 +#define BM_ANADIG_REG_CORE_RSVD0 0x40000000 +#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 +#define BP_ANADIG_REG_CORE_RAMP_RATE 27 +#define BM_ANADIG_REG_CORE_RAMP_RATE 0x18000000 +#define BF_ANADIG_REG_CORE_RAMP_RATE(v) \
- (((v) << 27) & BM_ANADIG_REG_CORE_RAMP_RATE)
+#define BP_ANADIG_REG_CORE_REG2_ADJ 23 +#define BM_ANADIG_REG_CORE_REG2_ADJ 0x07800000 +#define BF_ANADIG_REG_CORE_REG2_ADJ(v) \
- (((v) << 23) & BM_ANADIG_REG_CORE_REG2_ADJ)
+#define BP_ANADIG_REG_CORE_REG2_TRG 18 +#define BM_ANADIG_REG_CORE_REG2_TRG 0x007C0000 +#define BF_ANADIG_REG_CORE_REG2_TRG(v) \
- (((v) << 18) & BM_ANADIG_REG_CORE_REG2_TRG)
+#define BP_ANADIG_REG_CORE_REG1_ADJ 14 +#define BM_ANADIG_REG_CORE_REG1_ADJ 0x0003C000 +#define BF_ANADIG_REG_CORE_REG1_ADJ(v) \
- (((v) << 14) & BM_ANADIG_REG_CORE_REG1_ADJ)
+#define BP_ANADIG_REG_CORE_REG1_TRG 9 +#define BM_ANADIG_REG_CORE_REG1_TRG 0x00003E00 +#define BF_ANADIG_REG_CORE_REG1_TRG(v) \
- (((v) << 9) & BM_ANADIG_REG_CORE_REG1_TRG)
+#define BP_ANADIG_REG_CORE_REG0_ADJ 5 +#define BM_ANADIG_REG_CORE_REG0_ADJ 0x000001E0 +#define BF_ANADIG_REG_CORE_REG0_ADJ(v) \
- (((v) << 5) & BM_ANADIG_REG_CORE_REG0_ADJ)
+#define BP_ANADIG_REG_CORE_REG0_TRG 0 +#define BM_ANADIG_REG_CORE_REG0_TRG 0x0000001F +#define BF_ANADIG_REG_CORE_REG0_TRG(v) \
- (((v) << 0) & BM_ANADIG_REG_CORE_REG0_TRG)
+#define HW_ANADIG_ANA_MISC0 (0x00000150) +#define HW_ANADIG_ANA_MISC0_SET (0x00000154) +#define HW_ANADIG_ANA_MISC0_CLR (0x00000158) +#define HW_ANADIG_ANA_MISC0_TOG (0x0000015c)
+#define BP_ANADIG_ANA_MISC0_RSVD2 29 +#define BM_ANADIG_ANA_MISC0_RSVD2 0xE0000000 +#define BF_ANADIG_ANA_MISC0_RSVD2(v) \
- (((v) << 29) & BM_ANADIG_ANA_MISC0_RSVD2)
+#define BP_ANADIG_ANA_MISC0_CLKGATE_DELAY 26 +#define BM_ANADIG_ANA_MISC0_CLKGATE_DELAY 0x1C000000 +#define BF_ANADIG_ANA_MISC0_CLKGATE_DELAY(v) \
- (((v) << 26) & BM_ANADIG_ANA_MISC0_CLKGATE_DELAY)
+#define BM_ANADIG_ANA_MISC0_CLKGATE_CTRL 0x02000000 +#define BP_ANADIG_ANA_MISC0_ANAMUX 21 +#define BM_ANADIG_ANA_MISC0_ANAMUX 0x01E00000 +#define BF_ANADIG_ANA_MISC0_ANAMUX(v) \
- (((v) << 21) & BM_ANADIG_ANA_MISC0_ANAMUX)
+#define BM_ANADIG_ANA_MISC0_ANAMUX_EN 0x00100000 +#define BP_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 18 +#define BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH 0x000C0000 +#define BF_ANADIG_ANA_MISC0_WBCP_VPW_THRESH(v) \
- (((v) << 18) & BM_ANADIG_ANA_MISC0_WBCP_VPW_THRESH)
+#define BM_ANADIG_ANA_MISC0_OSC_XTALOK_EN 0x00020000 +#define BM_ANADIG_ANA_MISC0_OSC_XTALOK 0x00010000 +#define BP_ANADIG_ANA_MISC0_OSC_I 14 +#define BM_ANADIG_ANA_MISC0_OSC_I 0x0000C000 +#define BF_ANADIG_ANA_MISC0_OSC_I(v) \
- (((v) << 14) & BM_ANADIG_ANA_MISC0_OSC_I)
+#define BM_ANADIG_ANA_MISC0_RTC_RINGOSC_EN 0x00002000 +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x00001000 +#define BP_ANADIG_ANA_MISC0_RSVD0 10 +#define BM_ANADIG_ANA_MISC0_RSVD0 0x00000C00 +#define BF_ANADIG_ANA_MISC0_RSVD0(v) \
- (((v) << 10) & BM_ANADIG_ANA_MISC0_RSVD0)
+#define BP_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 8 +#define BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST 0x00000300 +#define BF_ANADIG_ANA_MISC0_REFTOP_BIAS_TST(v) \
- (((v) << 8) & BM_ANADIG_ANA_MISC0_REFTOP_BIAS_TST)
+#define BM_ANADIG_ANA_MISC0_REFTOP_VBGUP 0x00000080 +#define BP_ANADIG_ANA_MISC0_REFTOP_VBGADJ 4 +#define BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ 0x00000070 +#define BF_ANADIG_ANA_MISC0_REFTOP_VBGADJ(v) \
- (((v) << 4) & BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ)
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008 +#define BM_ANADIG_ANA_MISC0_REFTOP_LOWPOWER 0x00000004 +#define BM_ANADIG_ANA_MISC0_REFTOP_PWDVBGUP 0x00000002 +#define BM_ANADIG_ANA_MISC0_REFTOP_PWD 0x00000001
+#define HW_ANADIG_ANA_MISC1 (0x00000160) +#define HW_ANADIG_ANA_MISC1_SET (0x00000164) +#define HW_ANADIG_ANA_MISC1_CLR (0x00000168) +#define HW_ANADIG_ANA_MISC1_TOG (0x0000016c)
+#define BM_ANADIG_ANA_MISC1_IRQ_DIG_BO 0x80000000 +#define BM_ANADIG_ANA_MISC1_IRQ_ANA_BO 0x40000000 +#define BM_ANADIG_ANA_MISC1_IRQ_TEMPSENSE_BO 0x20000000 +#define BP_ANADIG_ANA_MISC1_RSVD0 14 +#define BM_ANADIG_ANA_MISC1_RSVD0 0x1FFFC000 +#define BF_ANADIG_ANA_MISC1_RSVD0(v) \
- (((v) << 14) & BM_ANADIG_ANA_MISC1_RSVD0)
+#define BM_ANADIG_ANA_MISC1_LVDSCLK2_IBEN 0x00002000 +#define BM_ANADIG_ANA_MISC1_LVDSCLK1_IBEN 0x00001000 +#define BM_ANADIG_ANA_MISC1_LVDSCLK2_OBEN 0x00000800 +#define BM_ANADIG_ANA_MISC1_LVDSCLK1_OBEN 0x00000400 +#define BP_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 5 +#define BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL 0x000003E0 +#define BF_ANADIG_ANA_MISC1_LVDS2_CLK_SEL(v) \
- (((v) << 5) & BM_ANADIG_ANA_MISC1_LVDS2_CLK_SEL)
+#define BP_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0 +#define BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL 0x0000001F +#define BF_ANADIG_ANA_MISC1_LVDS1_CLK_SEL(v) \
- (((v) << 0) & BM_ANADIG_ANA_MISC1_LVDS1_CLK_SEL)
+#define HW_ANADIG_ANA_MISC2 (0x00000170) +#define HW_ANADIG_ANA_MISC2_SET (0x00000174) +#define HW_ANADIG_ANA_MISC2_CLR (0x00000178) +#define HW_ANADIG_ANA_MISC2_TOG (0x0000017c)
+#define BP_ANADIG_ANA_MISC2_CONTROL3 30 +#define BM_ANADIG_ANA_MISC2_CONTROL3 0xC0000000 +#define BF_ANADIG_ANA_MISC2_CONTROL3(v) \
- (((v) << 30) & BM_ANADIG_ANA_MISC2_CONTROL3)
+#define BP_ANADIG_ANA_MISC2_REG2_STEP_TIME 28 +#define BM_ANADIG_ANA_MISC2_REG2_STEP_TIME 0x30000000 +#define BF_ANADIG_ANA_MISC2_REG2_STEP_TIME(v) \
- (((v) << 28) & BM_ANADIG_ANA_MISC2_REG2_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG1_STEP_TIME 26 +#define BM_ANADIG_ANA_MISC2_REG1_STEP_TIME 0x0C000000 +#define BF_ANADIG_ANA_MISC2_REG1_STEP_TIME(v) \
- (((v) << 26) & BM_ANADIG_ANA_MISC2_REG1_STEP_TIME)
+#define BP_ANADIG_ANA_MISC2_REG0_STEP_TIME 24 +#define BM_ANADIG_ANA_MISC2_REG0_STEP_TIME 0x03000000 +#define BF_ANADIG_ANA_MISC2_REG0_STEP_TIME(v) \
- (((v) << 24) & BM_ANADIG_ANA_MISC2_REG0_STEP_TIME)
+#define BM_ANADIG_ANA_MISC2_CONTROL2 0x00800000 +#define BM_ANADIG_ANA_MISC2_REG2_OK 0x00400000 +#define BM_ANADIG_ANA_MISC2_REG2_ENABLE_BO 0x00200000 +#define BM_ANADIG_ANA_MISC2_RSVD2 0x00100000 +#define BM_ANADIG_ANA_MISC2_REG2_BO_STATUS 0x00080000 +#define BP_ANADIG_ANA_MISC2_REG2_BO_OFFSET 16 +#define BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET 0x00070000 +#define BF_ANADIG_ANA_MISC2_REG2_BO_OFFSET(v) \
- (((v) << 16) & BM_ANADIG_ANA_MISC2_REG2_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL1 0x00008000 +#define BM_ANADIG_ANA_MISC2_REG1_OK 0x00004000 +#define BM_ANADIG_ANA_MISC2_REG1_ENABLE_BO 0x00002000 +#define BM_ANADIG_ANA_MISC2_RSVD1 0x00001000 +#define BM_ANADIG_ANA_MISC2_REG1_BO_STATUS 0x00000800 +#define BP_ANADIG_ANA_MISC2_REG1_BO_OFFSET 8 +#define BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET 0x00000700 +#define BF_ANADIG_ANA_MISC2_REG1_BO_OFFSET(v) \
- (((v) << 8) & BM_ANADIG_ANA_MISC2_REG1_BO_OFFSET)
+#define BM_ANADIG_ANA_MISC2_CONTROL0 0x00000080 +#define BM_ANADIG_ANA_MISC2_REG0_OK 0x00000040 +#define BM_ANADIG_ANA_MISC2_REG0_ENABLE_BO 0x00000020 +#define BM_ANADIG_ANA_MISC2_RSVD0 0x00000010 +#define BM_ANADIG_ANA_MISC2_REG0_BO_STATUS 0x00000008 +#define BP_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0 +#define BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET 0x00000007 +#define BF_ANADIG_ANA_MISC2_REG0_BO_OFFSET(v) \
- (((v) << 0) & BM_ANADIG_ANA_MISC2_REG0_BO_OFFSET)
+#define HW_ANADIG_TEMPSENSE0 (0x00000180) +#define HW_ANADIG_TEMPSENSE0_SET (0x00000184) +#define HW_ANADIG_TEMPSENSE0_CLR (0x00000188) +#define HW_ANADIG_TEMPSENSE0_TOG (0x0000018c)
+#define BP_ANADIG_TEMPSENSE0_ALARM_VALUE 20 +#define BM_ANADIG_TEMPSENSE0_ALARM_VALUE 0xFFF00000 +#define BF_ANADIG_TEMPSENSE0_ALARM_VALUE(v) \
- (((v) << 20) & BM_ANADIG_TEMPSENSE0_ALARM_VALUE)
+#define BP_ANADIG_TEMPSENSE0_TEMP_VALUE 8 +#define BM_ANADIG_TEMPSENSE0_TEMP_VALUE 0x000FFF00 +#define BF_ANADIG_TEMPSENSE0_TEMP_VALUE(v) \
- (((v) << 8) & BM_ANADIG_TEMPSENSE0_TEMP_VALUE)
+#define BM_ANADIG_TEMPSENSE0_RSVD0 0x00000080 +#define BM_ANADIG_TEMPSENSE0_TEST 0x00000040 +#define BP_ANADIG_TEMPSENSE0_VBGADJ 3 +#define BM_ANADIG_TEMPSENSE0_VBGADJ 0x00000038 +#define BF_ANADIG_TEMPSENSE0_VBGADJ(v) \
- (((v) << 3) & BM_ANADIG_TEMPSENSE0_VBGADJ)
+#define BM_ANADIG_TEMPSENSE0_FINISHED 0x00000004 +#define BM_ANADIG_TEMPSENSE0_MEASURE_TEMP 0x00000002 +#define BM_ANADIG_TEMPSENSE0_POWER_DOWN 0x00000001
+#define HW_ANADIG_TEMPSENSE1 (0x00000190) +#define HW_ANADIG_TEMPSENSE1_SET (0x00000194) +#define HW_ANADIG_TEMPSENSE1_CLR (0x00000198) +#define HW_ANADIG_TEMPSENSE1_TOG (0x0000019c)
+#define BP_ANADIG_TEMPSENSE1_RSVD0 16 +#define BM_ANADIG_TEMPSENSE1_RSVD0 0xFFFF0000 +#define BF_ANADIG_TEMPSENSE1_RSVD0(v) \
- (((v) << 16) & BM_ANADIG_TEMPSENSE1_RSVD0)
+#define BP_ANADIG_TEMPSENSE1_MEASURE_FREQ 0 +#define BM_ANADIG_TEMPSENSE1_MEASURE_FREQ 0x0000FFFF +#define BF_ANADIG_TEMPSENSE1_MEASURE_FREQ(v) \
- (((v) << 0) & BM_ANADIG_TEMPSENSE1_MEASURE_FREQ)
+#define HW_ANADIG_USB1_VBUS_DETECT (0x000001a0) +#define HW_ANADIG_USB1_VBUS_DETECT_SET (0x000001a4) +#define HW_ANADIG_USB1_VBUS_DETECT_CLR (0x000001a8) +#define HW_ANADIG_USB1_VBUS_DETECT_TOG (0x000001ac)
+#define BM_ANADIG_USB1_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD2 28 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD2 0x70000000 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD2(v) \
- (((v) << 28) & BM_ANADIG_USB1_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB1_VBUS_DETECT_CHARGE_VBUS 0x08000000 +#define BM_ANADIG_USB1_VBUS_DETECT_DISCHARGE_VBUS 0x04000000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD1 21 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD1 0x03E00000 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD1(v) \
- (((v) << 21) & BM_ANADIG_USB1_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_TO_B 0x00040000 +#define BP_ANADIG_USB1_VBUS_DETECT_RSVD0 8 +#define BM_ANADIG_USB1_VBUS_DETECT_RSVD0 0x0003FF00 +#define BF_ANADIG_USB1_VBUS_DETECT_RSVD0(v) \
- (((v) << 8) & BM_ANADIG_USB1_VBUS_DETECT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_OVERRIDE 0x00000080 +#define BM_ANADIG_USB1_VBUS_DETECT_AVALID_OVERRIDE 0x00000040 +#define BM_ANADIG_USB1_VBUS_DETECT_BVALID_OVERRIDE 0x00000020 +#define BM_ANADIG_USB1_VBUS_DETECT_SESSEND_OVERRIDE 0x00000010 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUS_OVERRIDE_EN 0x00000008 +#define BP_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0 +#define BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH 0x00000007 +#define BF_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH(v) \
- (((v) << 0) & BM_ANADIG_USB1_VBUS_DETECT_VBUSVALID_THRESH)
+#define HW_ANADIG_USB1_CHRG_DETECT (0x000001b0) +#define HW_ANADIG_USB1_CHRG_DETECT_SET (0x000001b4) +#define HW_ANADIG_USB1_CHRG_DETECT_CLR (0x000001b8) +#define HW_ANADIG_USB1_CHRG_DETECT_TOG (0x000001bc)
+#define BP_ANADIG_USB1_CHRG_DETECT_RSVD2 24 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD2 0xFF000000 +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD2(v) \
- (((v) << 24) & BM_ANADIG_USB1_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB1_CHRG_DETECT_BGR_BIAS 0x00800000 +#define BP_ANADIG_USB1_CHRG_DETECT_RSVD1 21 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD1 0x00600000 +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD1(v) \
- (((v) << 21) & BM_ANADIG_USB1_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB1_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B 0x00080000 +#define BM_ANADIG_USB1_CHRG_DETECT_CHK_CONTACT 0x00040000 +#define BP_ANADIG_USB1_CHRG_DETECT_RSVD0 1 +#define BM_ANADIG_USB1_CHRG_DETECT_RSVD0 0x0003FFFE +#define BF_ANADIG_USB1_CHRG_DETECT_RSVD0(v) \
- (((v) << 1) & BM_ANADIG_USB1_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DETECT_FORCE_DETECT 0x00000001
+#define HW_ANADIG_USB1_VBUS_DET_STAT (0x000001c0) +#define HW_ANADIG_USB1_VBUS_DET_STAT_SET (0x000001c4) +#define HW_ANADIG_USB1_VBUS_DET_STAT_CLR (0x000001c8) +#define HW_ANADIG_USB1_VBUS_DET_STAT_TOG (0x000001cc)
+#define BP_ANADIG_USB1_VBUS_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB1_VBUS_DET_STAT_RSVD0(v) \
- (((v) << 4) & BM_ANADIG_USB1_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID 0x00000008 +#define BM_ANADIG_USB1_VBUS_DET_STAT_AVALID 0x00000004 +#define BM_ANADIG_USB1_VBUS_DET_STAT_BVALID 0x00000002 +#define BM_ANADIG_USB1_VBUS_DET_STAT_SESSEND 0x00000001
+#define HW_ANADIG_USB1_CHRG_DET_STAT (0x000001d0) +#define HW_ANADIG_USB1_CHRG_DET_STAT_SET (0x000001d4) +#define HW_ANADIG_USB1_CHRG_DET_STAT_CLR (0x000001d8) +#define HW_ANADIG_USB1_CHRG_DET_STAT_TOG (0x000001dc)
+#define BP_ANADIG_USB1_CHRG_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB1_CHRG_DET_STAT_RSVD0(v) \
- (((v) << 4) & BM_ANADIG_USB1_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB1_CHRG_DET_STAT_DP_STATE 0x00000008 +#define BM_ANADIG_USB1_CHRG_DET_STAT_DM_STATE 0x00000004 +#define BM_ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED 0x00000002 +#define BM_ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+#define HW_ANADIG_USB1_LOOPBACK (0x000001e0) +#define HW_ANADIG_USB1_LOOPBACK_SET (0x000001e4) +#define HW_ANADIG_USB1_LOOPBACK_CLR (0x000001e8) +#define HW_ANADIG_USB1_LOOPBACK_TOG (0x000001ec)
+#define BP_ANADIG_USB1_LOOPBACK_RSVD0 9 +#define BM_ANADIG_USB1_LOOPBACK_RSVD0 0xFFFFFE00 +#define BF_ANADIG_USB1_LOOPBACK_RSVD0(v) \
- (((v) << 9) & BM_ANADIG_USB1_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST1 0x00000100 +#define BM_ANADIG_USB1_LOOPBACK_UTMO_DIG_TST0 0x00000080 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HIZ 0x00000040 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN 0x00000020 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_LS_MODE 0x00000010 +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_HS_MODE 0x00000008 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 0x00000004 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST0 0x00000002 +#define BM_ANADIG_USB1_LOOPBACK_UTMI_TESTSTART 0x00000001
+#define HW_ANADIG_USB1_MISC (0x000001f0) +#define HW_ANADIG_USB1_MISC_SET (0x000001f4) +#define HW_ANADIG_USB1_MISC_CLR (0x000001f8) +#define HW_ANADIG_USB1_MISC_TOG (0x000001fc)
+#define BM_ANADIG_USB1_MISC_RSVD1 0x80000000 +#define BM_ANADIG_USB1_MISC_EN_CLK_UTMI 0x40000000 +#define BM_ANADIG_USB1_MISC_RX_VPIN_FS 0x20000000 +#define BM_ANADIG_USB1_MISC_RX_VMIN_FS 0x10000000 +#define BM_ANADIG_USB1_MISC_RX_RXD_FS 0x08000000 +#define BM_ANADIG_USB1_MISC_RX_SQUELCH 0x04000000 +#define BM_ANADIG_USB1_MISC_RX_DISCON_DET 0x02000000 +#define BM_ANADIG_USB1_MISC_RX_HS_DATA 0x01000000 +#define BP_ANADIG_USB1_MISC_RSVD0 2 +#define BM_ANADIG_USB1_MISC_RSVD0 0x00FFFFFC +#define BF_ANADIG_USB1_MISC_RSVD0(v) \
- (((v) << 2) & BM_ANADIG_USB1_MISC_RSVD0)
+#define BM_ANADIG_USB1_MISC_EN_DEGLITCH 0x00000002 +#define BM_ANADIG_USB1_MISC_HS_USE_EXTERNAL_R 0x00000001
+#define HW_ANADIG_USB2_VBUS_DETECT (0x00000200) +#define HW_ANADIG_USB2_VBUS_DETECT_SET (0x00000204) +#define HW_ANADIG_USB2_VBUS_DETECT_CLR (0x00000208) +#define HW_ANADIG_USB2_VBUS_DETECT_TOG (0x0000020c)
+#define BM_ANADIG_USB2_VBUS_DETECT_EN_CHARGER_RESISTOR 0x80000000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD2 28 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD2 0x70000000 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD2(v) \
- (((v) << 28) & BM_ANADIG_USB2_VBUS_DETECT_RSVD2)
+#define BM_ANADIG_USB2_VBUS_DETECT_CHARGE_VBUS 0x08000000 +#define BM_ANADIG_USB2_VBUS_DETECT_DISCHARGE_VBUS 0x04000000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD1 21 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD1 0x03E00000 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD1(v) \
- (((v) << 21) & BM_ANADIG_USB2_VBUS_DETECT_RSVD1)
+#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_PWRUP_CMPS 0x00100000 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_5VDETECT 0x00080000 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_TO_B 0x00040000 +#define BP_ANADIG_USB2_VBUS_DETECT_RSVD0 3 +#define BM_ANADIG_USB2_VBUS_DETECT_RSVD0 0x0003FFF8 +#define BF_ANADIG_USB2_VBUS_DETECT_RSVD0(v) \
- (((v) << 3) & BM_ANADIG_USB2_VBUS_DETECT_RSVD0)
+#define BP_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0 +#define BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH 0x00000007 +#define BF_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH(v) \
- (((v) << 0) & BM_ANADIG_USB2_VBUS_DETECT_VBUSVALID_THRESH)
+#define HW_ANADIG_USB2_CHRG_DETECT (0x00000210) +#define HW_ANADIG_USB2_CHRG_DETECT_SET (0x00000214) +#define HW_ANADIG_USB2_CHRG_DETECT_CLR (0x00000218) +#define HW_ANADIG_USB2_CHRG_DETECT_TOG (0x0000021c)
+#define BP_ANADIG_USB2_CHRG_DETECT_RSVD2 24 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD2 0xFF000000 +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD2(v) \
- (((v) << 24) & BM_ANADIG_USB2_CHRG_DETECT_RSVD2)
+#define BM_ANADIG_USB2_CHRG_DETECT_BGR_BIAS 0x00800000 +#define BP_ANADIG_USB2_CHRG_DETECT_RSVD1 21 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD1 0x00600000 +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD1(v) \
- (((v) << 21) & BM_ANADIG_USB2_CHRG_DETECT_RSVD1)
+#define BM_ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000 +#define BM_ANADIG_USB2_CHRG_DETECT_CHK_CONTACT 0x00040000 +#define BP_ANADIG_USB2_CHRG_DETECT_RSVD0 1 +#define BM_ANADIG_USB2_CHRG_DETECT_RSVD0 0x0003FFFE +#define BF_ANADIG_USB2_CHRG_DETECT_RSVD0(v) \
- (((v) << 1) & BM_ANADIG_USB2_CHRG_DETECT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DETECT_FORCE_DETECT 0x00000001
+#define HW_ANADIG_USB2_VBUS_DET_STAT (0x00000220) +#define HW_ANADIG_USB2_VBUS_DET_STAT_SET (0x00000224) +#define HW_ANADIG_USB2_VBUS_DET_STAT_CLR (0x00000228) +#define HW_ANADIG_USB2_VBUS_DET_STAT_TOG (0x0000022c)
+#define BP_ANADIG_USB2_VBUS_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB2_VBUS_DET_STAT_RSVD0(v) \
- (((v) << 4) & BM_ANADIG_USB2_VBUS_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID 0x00000008 +#define BM_ANADIG_USB2_VBUS_DET_STAT_AVALID 0x00000004 +#define BM_ANADIG_USB2_VBUS_DET_STAT_BVALID 0x00000002 +#define BM_ANADIG_USB2_VBUS_DET_STAT_SESSEND 0x00000001
+#define HW_ANADIG_USB2_CHRG_DET_STAT (0x00000230) +#define HW_ANADIG_USB2_CHRG_DET_STAT_SET (0x00000234) +#define HW_ANADIG_USB2_CHRG_DET_STAT_CLR (0x00000238) +#define HW_ANADIG_USB2_CHRG_DET_STAT_TOG (0x0000023c)
+#define BP_ANADIG_USB2_CHRG_DET_STAT_RSVD0 4 +#define BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0 0xFFFFFFF0 +#define BF_ANADIG_USB2_CHRG_DET_STAT_RSVD0(v) \
- (((v) << 4) & BM_ANADIG_USB2_CHRG_DET_STAT_RSVD0)
+#define BM_ANADIG_USB2_CHRG_DET_STAT_DP_STATE 0x00000008 +#define BM_ANADIG_USB2_CHRG_DET_STAT_DM_STATE 0x00000004 +#define BM_ANADIG_USB2_CHRG_DET_STAT_CHRG_DETECTED 0x00000002 +#define BM_ANADIG_USB2_CHRG_DET_STAT_PLUG_CONTACT 0x00000001
+#define HW_ANADIG_USB2_LOOPBACK (0x00000240) +#define HW_ANADIG_USB2_LOOPBACK_SET (0x00000244) +#define HW_ANADIG_USB2_LOOPBACK_CLR (0x00000248) +#define HW_ANADIG_USB2_LOOPBACK_TOG (0x0000024c)
+#define BP_ANADIG_USB2_LOOPBACK_RSVD0 9 +#define BM_ANADIG_USB2_LOOPBACK_RSVD0 0xFFFFFE00 +#define BF_ANADIG_USB2_LOOPBACK_RSVD0(v) \
- (((v) << 9) & BM_ANADIG_USB2_LOOPBACK_RSVD0)
+#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST1 0x00000100 +#define BM_ANADIG_USB2_LOOPBACK_UTMO_DIG_TST0 0x00000080 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HIZ 0x00000040 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN 0x00000020 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_LS_MODE 0x00000010 +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_HS_MODE 0x00000008 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 0x00000004 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST0 0x00000002 +#define BM_ANADIG_USB2_LOOPBACK_UTMI_TESTSTART 0x00000001
+#define HW_ANADIG_USB2_MISC (0x00000250) +#define HW_ANADIG_USB2_MISC_SET (0x00000254) +#define HW_ANADIG_USB2_MISC_CLR (0x00000258) +#define HW_ANADIG_USB2_MISC_TOG (0x0000025c)
+#define BM_ANADIG_USB2_MISC_RSVD1 0x80000000 +#define BM_ANADIG_USB2_MISC_EN_CLK_UTMI 0x40000000 +#define BM_ANADIG_USB2_MISC_RX_VPIN_FS 0x20000000 +#define BM_ANADIG_USB2_MISC_RX_VMIN_FS 0x10000000 +#define BM_ANADIG_USB2_MISC_RX_RXD_FS 0x08000000 +#define BM_ANADIG_USB2_MISC_RX_SQUELCH 0x04000000 +#define BM_ANADIG_USB2_MISC_RX_DISCON_DET 0x02000000 +#define BM_ANADIG_USB2_MISC_RX_HS_DATA 0x01000000 +#define BP_ANADIG_USB2_MISC_RSVD0 2 +#define BM_ANADIG_USB2_MISC_RSVD0 0x00FFFFFC +#define BF_ANADIG_USB2_MISC_RSVD0(v) \
- (((v) << 2) & BM_ANADIG_USB2_MISC_RSVD0)
+#define BM_ANADIG_USB2_MISC_EN_DEGLITCH 0x00000002 +#define BM_ANADIG_USB2_MISC_HS_USE_EXTERNAL_R 0x00000001
+#define HW_ANADIG_DIGPROG (0x00000260)
+#define BP_ANADIG_DIGPROG_RSVD 24 +#define BM_ANADIG_DIGPROG_RSVD 0xFF000000 +#define BF_ANADIG_DIGPROG_RSVD(v) \
- (((v) << 24) & BM_ANADIG_DIGPROG_RSVD)
+#define BP_ANADIG_DIGPROG_MAJOR 8 +#define BM_ANADIG_DIGPROG_MAJOR 0x00FFFF00 +#define BF_ANADIG_DIGPROG_MAJOR(v) \
- (((v) << 8) & BM_ANADIG_DIGPROG_MAJOR)
+#define BP_ANADIG_DIGPROG_MINOR 0 +#define BM_ANADIG_DIGPROG_MINOR 0x000000FF +#define BF_ANADIG_DIGPROG_MINOR(v) \
- (((v) << 0) & BM_ANADIG_DIGPROG_MINOR)
#endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
You use the approach to add all possible defines, even if they are not used. U-Boot follows anoth approach, and only #defines and function that are really called in code are added to the tree. Most of your added code here is dead code, because they are not used at all.
In the series, you use some ANADIG_USB1_* for setting pll3, and ANADIG_TEMPSENSE in your driver. Why do we need all other stuff ? It is also not ported from kernel - or atr least I cannot find in current mainline.
Best regards, Stefano Babic
Add api to check and enable pll3 as required for thermal sensor driver.
Signed-off-by: Nitin Garg nitin.garg@freescale.com ---
arch/arm/cpu/armv7/mx6/clock.c | 25 +++++++++++++++++++++++++ arch/arm/include/asm/arch-mx6/clock.h | 1 + 2 files changed, 26 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index 336e557..04273bb 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -642,6 +642,31 @@ int enable_pcie_clock(void) BM_ANADIG_PLL_ENET_ENABLE_PCIE); }
+void enable_pll3(void) +{ + struct anatop_regs __iomem *anatop = + (struct anatop_regs __iomem *)ANATOP_BASE_ADDR; + + /* make sure pll3 is enabled */ + if ((readl(&anatop->usb1_pll_480_ctrl) & + BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) { + /* enable pll's power */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_POWER, + &anatop->usb1_pll_480_ctrl_set); + writel(0x80, &anatop->ana_misc2_clr); + /* wait for pll lock */ + while ((readl(&anatop->usb1_pll_480_ctrl) & + BM_ANADIG_USB1_PLL_480_CTRL_LOCK) == 0) + ; + /* disable bypass */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_BYPASS, + &anatop->usb1_pll_480_ctrl_clr); + /* enable pll output */ + writel(BM_ANADIG_USB1_PLL_480_CTRL_ENABLE, + &anatop->usb1_pll_480_ctrl_set); + } +} + unsigned int mxc_get_clock(enum mxc_clock clk) { switch (clk) { diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index c11674f..c40abc4 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -65,4 +65,5 @@ int enable_spi_clk(unsigned char enable, unsigned spi_num); void enable_ipu_clock(void); int enable_fec_anatop_clock(enum enet_freq freq); void enable_enet_clk(unsigned char enable); +void enable_pll3(void); #endif /* __ASM_ARCH_CLOCK_H */
i.MX6 SoC has onchip temperature sensor. Add driver for this sensor.
Signed-off-by: Nitin Garg nitin.garg@freescale.com ---
drivers/Makefile | 1 + drivers/thermal/Makefile | 8 +++ drivers/thermal/imx_thermal.c | 137 +++++++++++++++++++++++++++++++++++++++++ include/imx_thermal.h | 15 +++++ 4 files changed, 161 insertions(+) create mode 100644 drivers/thermal/Makefile create mode 100644 drivers/thermal/imx_thermal.c create mode 100644 include/imx_thermal.h
diff --git a/drivers/Makefile b/drivers/Makefile index d8361d9..2792acd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_QE) += qe/ obj-y += memory/ obj-y += pwm/ obj-y += input/ +obj-y += thermal/ diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile new file mode 100644 index 0000000..04ae395 --- /dev/null +++ b/drivers/thermal/Makefile @@ -0,0 +1,8 @@ +# +# (C) Copyright 2014 Freescale Semiconductor, Inc. +# Author: Nitin Garg nitin.garg@freescale.com +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_IMX6_THERMAL) += imx_thermal.o diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c new file mode 100644 index 0000000..3b53b61 --- /dev/null +++ b/drivers/thermal/imx_thermal.c @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2014 Freescale Semiconductor, Inc. + * Author: Nitin Garg nitin.garg@freescale.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <div64.h> +#include <fuse.h> +#include <asm/io.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> + +#define TEMPERATURE_MIN -40 +#define TEMPERATURE_HOT 80 +#define TEMPERATURE_MAX 125 +#define FACTOR0 10000000 +#define FACTOR1 15976 +#define FACTOR2 4297157 +#define MEASURE_FREQ 327 + +static int read_cpu_temperature(u32 fuse) +{ + int temperature; + unsigned int reg, n_meas; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int t1, n1; + u32 c1, c2; + u64 temp64; + + /* make sure pll3 is enabled for thermal sensor */ + enable_pll3(); + + /* + * Sensor data layout: + * [31:20] - sensor value @ 25C + * We use universal formula now and only need sensor value @ 25C + * slope = 0.4297157 - (0.0015976 * 25C fuse) + */ + n1 = fuse >> 20; + t1 = 25; /* t1 always 25C */ + + /* + * Derived from linear interpolation: + * slope = 0.4297157 - (0.0015976 * 25C fuse) + * slope = (FACTOR2 - FACTOR1 * n1) / FACTOR0 + * (Nmeas - n1) / (Tmeas - t1) = slope + * We want to reduce this down to the minimum computation necessary + * for each temperature read. Also, we want Tmeas in millicelsius + * and we don't want to lose precision from integer division. So... + * Tmeas = (Nmeas - n1) / slope + t1 + * milli_Tmeas = 1000 * (Nmeas - n1) / slope + 1000 * t1 + * milli_Tmeas = -1000 * (n1 - Nmeas) / slope + 1000 * t1 + * Let constant c1 = (-1000 / slope) + * milli_Tmeas = (n1 - Nmeas) * c1 + 1000 * t1 + * Let constant c2 = n1 *c1 + 1000 * t1 + * milli_Tmeas = c2 - Nmeas * c1 + */ + temp64 = FACTOR0; + temp64 *= 1000; + do_div(temp64, FACTOR1 * n1 - FACTOR2); + c1 = temp64; + c2 = n1 * c1 + 1000 * t1; + + /* + * now we only use single measure, every time we read + * the temperature, we will power on/down anadig thermal + * module + */ + writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_clr); + writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set); + + /* setup measure freq */ + reg = readl(&anatop->tempsense1); + reg &= ~BM_ANADIG_TEMPSENSE1_MEASURE_FREQ; + reg |= MEASURE_FREQ; + writel(reg, &anatop->tempsense1); + + /* start the measurement process */ + writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_clr); + writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr); + writel(BM_ANADIG_TEMPSENSE0_MEASURE_TEMP, &anatop->tempsense0_set); + + /* make sure that the latest temp is valid */ + while ((readl(&anatop->tempsense0) & + BM_ANADIG_TEMPSENSE0_FINISHED) == 0) + udelay(10000); + + /* read temperature count */ + reg = readl(&anatop->tempsense0); + n_meas = (reg & BM_ANADIG_TEMPSENSE0_TEMP_VALUE) + >> BP_ANADIG_TEMPSENSE0_TEMP_VALUE; + writel(BM_ANADIG_TEMPSENSE0_FINISHED, &anatop->tempsense0_clr); + + /* milli_Tmeas = c2 - Nmeas * c1 */ + temperature = (c2 - n_meas * c1)/1000; + + /* power down anatop thermal sensor */ + writel(BM_ANADIG_TEMPSENSE0_POWER_DOWN, &anatop->tempsense0_set); + writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_clr); + + return temperature; +} + +void check_cpu_temperature(void) +{ + int cpu_tmp = 0; + u32 fuse = ~0; + + /* Read Temperature calibration data fuse */ + fuse_read(1, 6, &fuse); + + /* Check for valid fuse */ + if (fuse == 0 || fuse == ~0) { + printf("CPU: Temperature: invalid data, fuse: 0x%x\n", fuse); + return; + } + + cpu_tmp = read_cpu_temperature(fuse); + while (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) { + if (cpu_tmp >= TEMPERATURE_HOT) { + printf("CPU is %d C, too hot to boot, waiting...\n", + cpu_tmp); + udelay(5000000); + cpu_tmp = read_cpu_temperature(fuse); + } else { + break; + } + } + + if (cpu_tmp > TEMPERATURE_MIN && cpu_tmp < TEMPERATURE_MAX) + printf("CPU: Temperature %d C\n", cpu_tmp); + else + printf("CPU: Temperature: invalid sensor data\n"); +} diff --git a/include/imx_thermal.h b/include/imx_thermal.h new file mode 100644 index 0000000..979664a --- /dev/null +++ b/include/imx_thermal.h @@ -0,0 +1,15 @@ +/* + * IMX Thermal Defines + *------------------------------------------------------------------- + * + * Copyright 2014 Freescale Semiconductor, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IMX6_THERMAL_H__ +#define __IMX6_THERMAL_H__ + +void check_cpu_temperature(void); + +#endif /* __IMX6_THERMAL_H__ */
read cpu temperature using the onchip thermal sensor.
Signed-off-by: Nitin Garg nitin.garg@freescale.com ---
arch/arm/imx-common/cpu.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index ed826a0..a7b49bd 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -15,6 +15,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <ipu_pixfmt.h> +#include <imx_thermal.h>
#ifdef CONFIG_FSL_ESDHC #include <fsl_esdhc.h> @@ -139,6 +140,11 @@ int print_cpuinfo(void) (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); + +#if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) + check_cpu_temperature(); +#endif + printf("Reset cause: %s\n", get_reset_cause()); return 0; }
Add CONFIG_IMX6_THERMAL to mx6sabre_common.h file. Since thermal driver depends on ocotp, make sure to enable CONFIG_MXC_OCOTP when CONFIG_IMX6_THERMAL is slected.
Signed-off-by: Nitin Garg nitin.garg@freescale.com
---
Changes in v5: -Don't modify the copyright of cpu.c and crm_regs.h file
Changes in v4: -Added imx6 thermal sensor as a driver -Renamed the config define to be more meaningful -Move the clock code to clock.c -Reusing ocotp driver for reading fuse -Fix check for calibration fuse not programmed -Aligned the slope computation with kernel -Added Anadig register defines as seperate commit
Changes in v3: -adds the mx6 thermal driver support -adds the mx6 thermal support to mx6sabresd board.
Changes in v2: -run checkpatch and fix reported issues
include/configs/mx6sabre_common.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 2d93d6c..b3e6071 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -24,6 +24,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD
@@ -37,7 +38,7 @@ #define CONFIG_MXC_UART
#define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) #define CONFIG_MXC_OCOTP #endif
participants (2)
-
Nitin Garg -
Stefano Babic