Hello,

We are using a Sequoia 440 EPX running u-boot 1.3.1 and are encountering an inconsistent startup problem when setting usbact=dev. We are using the USB DMA channel for our own DMA functionality and do not require a USB host interface. The problem is when we enable this field to 'dev' the board will take a significantly longer amount of time to boot or will hang indefinitely sometimes. It appears to always hang during network adapter initializations. After issuing a soft reset the board will boot up immediately.

Dave Cogley

Software Engineer

Ultra Stereo Labs, Inc.

(805) 549-0161

mailto:dcogley@uslinc.com