Greetings,

An update on the blob vs u-boot problems Im having. I noticed that driving UART3 > 19200 on blob caused the same kind of issues that Im seeing in u-boot. But downgrading baud = 19200 works in u-boot, but when booting kernel I instead get scrambled data (which looks like wrong baud). Ive double checked so the kernel in itself is using 19200 (hardcoded command line).

Since no one is using u-boot with an sa1110 + sa1111 platform its quite hard to get any ideas about this. So suggestions are very welcome.

The memory, pin settings are all the same on both bootloaders

Best wishes Kristoffer