[PATCH] ARM: stm32: Add update_sf script to install U-Boot into SF on DHSOM
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bac9e8388a7..b68e153f10b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -9,7 +9,17 @@ #define __CONFIG_STM32MP15_DH_DHSOM_H__
#define STM32MP_BOARD_EXTRA_ENV \ - "usb_pgood_delay=1000\0" + "usb_pgood_delay=1000\0" \ + "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \ + "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ + "load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \ + "env set filesize1 ${filesize} && " \ + "load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \ + "sf probe && sf erase 0 0x200000 && " \ + "sf update ${loadaddr1} 0 ${filesize1} && " \ + "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ + "sf update ${loadaddr} 0x80000 ${filesize} && " \ + "env set filesize1 && env set loadaddr1\0"
#include <configs/stm32mp15_common.h>
Hi Marek
On 11/13/21 3:25 AM, Marek Vasut wrote:
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bac9e8388a7..b68e153f10b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -9,7 +9,17 @@ #define __CONFIG_STM32MP15_DH_DHSOM_H__
#define STM32MP_BOARD_EXTRA_ENV \
- "usb_pgood_delay=1000\0"
- "usb_pgood_delay=1000\0" \
- "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \"load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \"env set filesize1 ${filesize} && " \"load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \"sf probe && sf erase 0 0x200000 && " \"sf update ${loadaddr1} 0 ${filesize1} && " \"sf update ${loadaddr1} 0x40000 ${filesize1} && " \"sf update ${loadaddr} 0x80000 ${filesize} && " \"env set filesize1 && env set loadaddr1\0"#include <configs/stm32mp15_common.h>
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com Thanks Patrice
Hi Marek,
On 11/13/21 3:25 AM, Marek Vasut wrote:
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bac9e8388a7..b68e153f10b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -9,7 +9,17 @@ #define __CONFIG_STM32MP15_DH_DHSOM_H__
#define STM32MP_BOARD_EXTRA_ENV \
- "usb_pgood_delay=1000\0"
"usb_pgood_delay=1000\0" \
"update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \"load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \"env set filesize1 ${filesize} && " \"load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \"sf probe && sf erase 0 0x200000 && " \"sf update ${loadaddr1} 0 ${filesize1} && " \"sf update ${loadaddr1} 0x40000 ${filesize1} && " \"sf update ${loadaddr} 0x80000 ${filesize} && " \"env set filesize1 && env set loadaddr1\0"#include <configs/stm32mp15_common.h>
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
HI Marek
On 11/15/21 12:23 PM, Patrick DELAUNAY wrote:
Hi Marek,
On 11/13/21 3:25 AM, Marek Vasut wrote:
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bac9e8388a7..b68e153f10b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -9,7 +9,17 @@ #define __CONFIG_STM32MP15_DH_DHSOM_H__ #define STM32MP_BOARD_EXTRA_ENV \ - "usb_pgood_delay=1000\0" + "usb_pgood_delay=1000\0" \ + "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \ + "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ + "load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \ + "env set filesize1 ${filesize} && " \ + "load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \ + "sf probe && sf erase 0 0x200000 && " \ + "sf update ${loadaddr1} 0 ${filesize1} && " \ + "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ + "sf update ${loadaddr} 0x80000 ${filesize} && " \ + "env set filesize1 && env set loadaddr1\0" #include <configs/stm32mp15_common.h>
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied to u-boot-stm32/next
Thanks Patrice
On 11/30/21 11:28, Patrice CHOTARD wrote:
HI Marek
On 11/15/21 12:23 PM, Patrick DELAUNAY wrote:
Hi Marek,
On 11/13/21 3:25 AM, Marek Vasut wrote:
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. The script erases the entire SPI NOR, including U-Boot environment, to make sure the installation is clean. To retain environment from current running U-Boot, run 'saveenv' after running the 'update_sf' script.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
include/configs/stm32mp15_dh_dhsom.h | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h index bac9e8388a7..b68e153f10b 100644 --- a/include/configs/stm32mp15_dh_dhsom.h +++ b/include/configs/stm32mp15_dh_dhsom.h @@ -9,7 +9,17 @@ #define __CONFIG_STM32MP15_DH_DHSOM_H__ #define STM32MP_BOARD_EXTRA_ENV \ - "usb_pgood_delay=1000\0" + "usb_pgood_delay=1000\0" \ + "update_sf=" /* Erase SPI NOR and install U-Boot from SD */ \ + "setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \ + "load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \ + "env set filesize1 ${filesize} && " \ + "load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \ + "sf probe && sf erase 0 0x200000 && " \ + "sf update ${loadaddr1} 0 ${filesize1} && " \ + "sf update ${loadaddr1} 0x40000 ${filesize1} && " \ + "sf update ${loadaddr} 0x80000 ${filesize} && " \ + "env set filesize1 && env set loadaddr1\0" #include <configs/stm32mp15_common.h>
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied to u-boot-stm32/next
I would prefer if all this stuff went into 2022.01 , it is isolated to the DH boards after all and it was posted before rc2.
participants (3)
-
Marek Vasut -
Patrice CHOTARD -
Patrick DELAUNAY