v2019.01 commit cbff9f80cedd ("ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6") made the sdhi/usb nodes available in r8a77965.dtsi.

Hence, remove the SDHI/USB nodes from r8a77965-u-boot.dtsi. This is equivalent to partially reverting below v2019.01 commits: - f529bc551b6d ("ARM: dts: rmobile: Extract USB nodes on M3N") - 830b94f76867 ("ARM: dts: rmobile: Extract SDHI nodes on M3N")

Duplicating the nodes from <soc>.dtsi to <soc>-u-boot.dtsi is obviously: - not needed if no U-boot-specific changes are needed in those nodes. - potentially dangerous/error-prone, since the duplicated properties override the properties originally defined in <soc>.dtsi. One possible consequence is that <soc>.dtsi is getting an update from Linux, while <soc>-u-boot.dtsi stays unchanged. In this situation, the obsolete property values from <soc>-u-boot.dtsi will take precedence masking some of the <soc>.dtsi updates, potentially leading to all kind of obscure issues.

Below is the dtdiff of r8a77965-salvator-x-u-boot.dtb (the only "user" of r8a77965-u-boot.dtsi) before and after the patch (slightly reformatted to avoid 'git am/apply' issues and to reduce the width).

What below output means is there is already a mismatch in some of SDHI/USB nodes between r8a77965.dtsi and r8a77965-u-boot.dtsi. Since no U-Boot customization is needed in SDHI/USB DT nodes, get rid of them in r8a77965-u-boot.dtsi.

$> dtdiff before-r8a77965-salvator-x-u-boot.dtb \ after-r8a77965-salvator-x-u-boot.dtb --- /dev/fd/63 2019-03-09 12:57:40.877963983 +0100 +++ /dev/fd/62 2019-03-09 12:57:40.877963983 +0100 @@ -1471,7 +1471,7 @@ bus-width = <0x4>; cd-gpios = <0x51 0xc 0x1>; clocks = <0x6 0x1 0x13a>; - compatible = "renesas,sdhi-r8a77965"; + compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; interrupts = <0x0 0xa5 0x4>; max-frequency = <0xc65d400>; pinctrl-0 = <0x4d>; @@ -1492,7 +1492,7 @@

sd@ee120000 { clocks = <0x6 0x1 0x139>; - compatible = "renesas,sdhi-r8a77965"; + compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; interrupts = <0x0 0xa6 0x4>; max-frequency = <0xbebc200>; power-domains = <0x1 0x20>; @@ -1504,7 +1504,7 @@ sd@ee140000 { bus-width = <0x8>; clocks = <0x6 0x1 0x138>; - compatible = "renesas,sdhi-r8a77965"; + compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; fixed-emmc-driver-type = <0x1>; interrupts = <0x0 0xa7 0x4>; max-frequency = <0xbebc200>; @@ -1526,7 +1526,7 @@ bus-width = <0x4>; cd-gpios = <0x5a 0xf 0x1>; clocks = <0x6 0x1 0x137>; - compatible = "renesas,sdhi-r8a77965"; + compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; interrupts = <0x0 0xa8 0x4>; max-frequency = <0xc65d400>; pinctrl-0 = <0x56>; @@ -1868,14 +1868,14 @@

usb-phy@ee0a0200 { #phy-cells = <0x0>; - clocks = <0x6 0x1 0x2be>; + clocks = <0x6 0x1 0x2bf>; compatible = "renesas,usb2-phy-r8a77965", "renesas,rcar-gen3-usb2-phy"; phandle = <0x47>; pinctrl-0 = <0x4c>; pinctrl-names = "default"; power-domains = <0x1 0x20>; reg = <0x0 0xee0a0200 0x0 0x700>; - resets = <0x6 0x2be>; + resets = <0x6 0x2bf>; status = "okay"; };

Signed-off-by: Eugeniu Rosca erosca@de.adit-jv.com ---

v2: - no code change - reworked the description --- arch/arm/dts/r8a77965-u-boot.dtsi | 99 ------------------------------- 1 file changed, 99 deletions(-)

diff --git a/arch/arm/dts/r8a77965-u-boot.dtsi b/arch/arm/dts/r8a77965-u-boot.dtsi index cbd29b3aed68..ca80ef8f29ee 100644 --- a/arch/arm/dts/r8a77965-u-boot.dtsi +++ b/arch/arm/dts/r8a77965-u-boot.dtsi @@ -19,103 +19,4 @@ bank-width = <2>; status = "disabled"; }; - - sdhi0: sd@ee100000 { - compatible = "renesas,sdhi-r8a77965"; - reg = <0 0xee100000 0 0x2000>; - interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 314>; - max-frequency = <200000000>; - power-domains = <&sysc 32>; - resets = <&cpg 314>; - status = "disabled"; - }; - - sdhi1: sd@ee120000 { - compatible = "renesas,sdhi-r8a77965"; - reg = <0 0xee120000 0 0x2000>; - interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 313>; - max-frequency = <200000000>; - power-domains = <&sysc 32>; - resets = <&cpg 313>; - status = "disabled"; - }; - - sdhi2: sd@ee140000 { - compatible = "renesas,sdhi-r8a77965"; - reg = <0 0xee140000 0 0x2000>; - interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 312>; - max-frequency = <200000000>; - power-domains = <&sysc 32>; - resets = <&cpg 312>; - status = "disabled"; - }; - - sdhi3: sd@ee160000 { - compatible = "renesas,sdhi-r8a77965"; - reg = <0 0xee160000 0 0x2000>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 311>; - max-frequency = <200000000>; - power-domains = <&sysc 32>; - resets = <&cpg 311>; - status = "disabled"; - }; - - ehci0: usb@ee080100 { - compatible = "generic-ehci"; - reg = <0 0xee080100 0 0x100>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; - phy-names = "usb"; - companion= <&ohci0>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; - }; - - usb2_phy0: usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a77965", - "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee080200 0 0x700>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - power-domains = <&sysc 32>; - resets = <&cpg 703>; - #phy-cells = <0>; - }; - - ehci1: usb@ee0a0100 { - compatible = "generic-ehci"; - reg = <0 0xee0a0100 0 0x100>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; - phy-names = "usb"; - companion= <&ohci1>; - power-domains = <&sysc 32>; - resets = <&cpg 702>; - }; - - usb2_phy1: usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a77965", - "renesas,rcar-gen3-usb2-phy"; - reg = <0 0xee0a0200 0 0x700>; - clocks = <&cpg CPG_MOD 702>; - power-domains = <&sysc 32>; - resets = <&cpg 702>; - #phy-cells = <0>; - }; - - xhci0: usb@ee000000 { - compatible = "renesas,xhci-r8a77965", - "renesas,rcar-gen3-xhci"; - reg = <0 0xee000000 0 0xc00>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 328>; - power-domains = <&sysc 32>; - resets = <&cpg 328>; - }; };