The previous version printed the same debug message for both the enable and disable routines without highlighting whether you were enabling or disabling the module. It is now clear whether you are enabling or disabling the module.

Signed-off-by: Dario Binacchi dariobin@libero.it ---

drivers/clk/ti/clk-ctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/ti/clk-ctrl.c b/drivers/clk/ti/clk-ctrl.c index 3c6195b208..8ac085ee4f 100644 --- a/drivers/clk/ti/clk-ctrl.c +++ b/drivers/clk/ti/clk-ctrl.c @@ -49,7 +49,7 @@ static int clk_ti_ctrl_disable(struct clk *clk) }

clk_modules[0] = (u32 *)(offs); - dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]); + dev_dbg(clk->dev, "disable module @ %p\n", clk_modules[0]); do_disable_clocks(NULL, clk_modules, 1); return 0; } @@ -69,7 +69,7 @@ static int clk_ti_ctrl_enable(struct clk *clk) }

clk_modules[0] = (u32 *)(offs); - dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]); + dev_dbg(clk->dev, "enable module @ %p\n", clk_modules[0]); do_enable_clocks(NULL, clk_modules, 1); return 0; }