[U-Boot] [PATCH v2 1/2] opos6uldev: don't call enable_lcdif_clock
The mxsfb driver already calls enable_lcdif_clock.
Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Sébastien Szymanski sebastien.szymanski@armadeus.com ---
Changes for v2: - none
board/armadeus/opos6uldev/board.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c index 4faa997126..aed334f8fb 100644 --- a/board/armadeus/opos6uldev/board.c +++ b/board/armadeus/opos6uldev/board.c @@ -3,7 +3,6 @@ * Copyright (C) 2018 Armadeus Systems */
-#include <asm/arch/clock.h> #include <asm/arch/mx6-pins.h> #include <asm/arch/sys_proto.h> #include <asm/gpio.h> @@ -49,8 +48,6 @@ int setup_lcd(void) struct gpio_desc backlight; int ret;
- enable_lcdif_clock(LCDIF1_BASE_ADDR, 1); - imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
/* Set Brightness to high */
This function sets the polarity of the PWR signal which is not used on the opos6uldev board. Remove it.
Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Sébastien Szymanski sebastien.szymanski@armadeus.com ---
Changes for v2: - better commit log
board/armadeus/opos6uldev/board.c | 21 --------------------- 1 file changed, 21 deletions(-)
diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c index aed334f8fb..cbf40d5c4a 100644 --- a/board/armadeus/opos6uldev/board.c +++ b/board/armadeus/opos6uldev/board.c @@ -70,27 +70,6 @@ int setup_lcd(void) } #endif
-#ifdef CONFIG_USB_EHCI_MX6 -#define USB_OTHERREGS_OFFSET 0x800 -#define UCTRL_PWR_POL (1 << 9) - -int board_ehci_hcd_init(int port) -{ - u32 *usbnc_usb_ctrl; - - if (port > 1) - return -EINVAL; - - usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + - port * 4); - - /* Set Power polarity */ - setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); - - return 0; -} -#endif - int opos6ul_board_late_init(void) { #ifdef CONFIG_VIDEO_MXS
This function sets the polarity of the PWR signal which is not used on the opos6uldev board. Remove it. Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Sébastien Szymanski sebastien.szymanski@armadeus.com
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
participants (2)
-
sbabic＠denx.de -
Sébastien Szymanski