[U-Boot] [patch u-boot git 3/5] davinci: split out some dm644x-specific bits from psc
From: David Brownell dbrownell@users.sourceforge.net
Split out DaVinci DM6446-specific bits from more generic bits:
- Add a CONFIG_SOC_DM644X. All current boards use DM6446 chips; DM6443 and DM6441 chips differ in available peripherals.
- Move most DM644X-specific bits from psc.c to a new dm644x.c file, which is conditionally built. It provides device-specific setup.
Plus minor coding style and comment updates with respect to the PSC.
Signed-off-by: David Brownell dbrownell@users.sourceforge.net --- cpu/arm926ejs/davinci/Makefile | 1 cpu/arm926ejs/davinci/dm644x.c | 94 +++++++++++++++++++++++++++++++ cpu/arm926ejs/davinci/psc.c | 103 +++++++++------------------------- include/configs/davinci_dvevm.h | 1 include/configs/davinci_schmoogie.h | 1 include/configs/davinci_sffsdr.h | 1 include/configs/davinci_sonata.h | 1 7 files changed, 127 insertions(+), 75 deletions(-)
--- a/cpu/arm926ejs/davinci/Makefile +++ b/cpu/arm926ejs/davinci/Makefile @@ -28,6 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a
COBJS-y += timer.o psc.o +COBJS-$(CONFIG_SOC_DM644X) += dm644x.o COBJS-$(CONFIG_DRIVER_TI_EMAC) += ether.o lxt972.o dp83848.o
SOBJS = reset.o --- /dev/null +++ b/cpu/arm926ejs/davinci/dm644x.c @@ -0,0 +1,94 @@ +/* + * SoC-specific code for tms320dm644x chips + * + * Copyright (C) 2007 Sergey Kubushyn ksi@koi8.net + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/hardware.h> + + +#define PINMUX0_EMACEN (1 << 31) +#define PINMUX0_AECS5 (1 << 11) +#define PINMUX0_AECS4 (1 << 10) + +#define PINMUX1_I2C (1 << 7) +#define PINMUX1_UART1 (1 << 1) +#define PINMUX1_UART0 (1 << 0) + + +void davinci_enable_uart0(void) +{ + lpsc_on(DAVINCI_LPSC_UART0); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= PINMUX1_UART0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC +void davinci_enable_emac(void) +{ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable EMAC. */ + REG(PINMUX0) |= PINMUX0_EMACEN; +} +#endif + +void davinci_enable_i2c(void) +{ + lpsc_on(DAVINCI_LPSC_I2C); + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= PINMUX1_I2C; +} + +void davinci_errata_workarounds(void) +{ + /* + * Workaround for TMS320DM6446 errata 1.3.22: + * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset + * Revision(s) Affected: 1.3 and earlier + */ + REG(PSC_SILVER_BULLET) = 0; + + /* + * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR) + * as suggested in TMS320DM6446 errata 2.1.2: + * + * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions + * low priority modules can occupy the bus and prevent high priority + * modules like the VPSS from getting the required DDR2 throughput. + * A hex value of 0x20 should provide a good ARM (cache enabled) + * performance and still allow good utilization by the VPSS or other + * modules. + */ + REG(VBPR) = 0x20; +} --- a/cpu/arm926ejs/davinci/psc.c +++ b/cpu/arm926ejs/davinci/psc.c @@ -26,22 +26,22 @@ #include <common.h> #include <asm/arch/hardware.h>
-#define PINMUX0_EMACEN (1 << 31) -#define PINMUX0_AECS5 (1 << 11) -#define PINMUX0_AECS4 (1 << 10) - -#define PINMUX1_I2C (1 << 7) -#define PINMUX1_UART1 (1 << 1) -#define PINMUX1_UART0 (1 << 0) - /* - * The DM6446 includes two separate power domains: "Always On" and "DSP". The - * "Always On" power domain is always on when the chip is on. The "Always On" - * domain is powered by the VDD pins of the DM6446. The majority of the - * DM6446's modules lie within the "Always On" power domain. A separate - * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain - * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of - * the DM6446. + * The PSC manages three inputs to a "module" which may be a peripheral or + * CPU. Those inputs are the module's: clock; reset signal; and sometimes + * its power domain. For our purposes, we only care whether clock and power + * are active, and the module is out of reset. + * + * DaVinci chips may include two separate power domains: "Always On" and "DSP". + * Chips without a DSP generally have only one domain. + * + * The "Always On" power domain is always on when the chip is on, and is + * powered by the VDD pins (on DM644X). The majority of DaVinci modules + * lie within the "Always On" power domain. + * + * A separate domain called the "DSP" domain houses the C64x+ and other video + * hardware such as VICP. In some chips, the "DSP" domain is not always on. + * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X). */
/* Works on Always On power domain only (no PD argument) */ @@ -55,15 +55,17 @@ void lpsc_on(unsigned int id) mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
- while (REG(PSC_PTSTAT) & 0x01); + while (REG(PSC_PTSTAT) & 0x01) + continue;
if ((*mdstat & 0x1f) == 0x03) return; /* Already on and enabled */
*mdctl |= 0x03;
- /* Special treatment for some modules as for sprue14 p.7.4.2 */ switch (id) { +#ifdef CONFIG_SOC_DM644X + /* Special treatment for some modules as for sprue14 p.7.4.2 */ case DAVINCI_LPSC_VPSSSLV: case DAVINCI_LPSC_EMAC: case DAVINCI_LPSC_EMAC_WRAPPER: @@ -80,14 +82,20 @@ void lpsc_on(unsigned int id) case DAVINCI_LPSC_GPIO: *mdctl |= 0x200; break; +#endif }
REG(PSC_PTCMD) = 0x01;
- while (REG(PSC_PTSTAT) & 0x03); - while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ + while (REG(PSC_PTSTAT) & 0x03) + continue; + while ((*mdstat & 0x1f) != 0x03) /* Probably an overkill... */ + continue; }
+/* Not all DaVinci chips have a DSP power domain. */ +#ifdef CONFIG_SOC_DM644X + /* If DSPLINK is used, we don't want U-Boot to power on the DSP. */ #if !defined(CONFIG_SYS_USE_DSPLINK) void dsp_on(void) @@ -124,59 +132,4 @@ void dsp_on(void) } #endif /* CONFIG_SYS_USE_DSPLINK */
-void davinci_enable_uart0(void) -{ - lpsc_on(DAVINCI_LPSC_UART0); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x0000e003; - - /* Enable UART0 MUX lines */ - REG(PINMUX1) |= PINMUX1_UART0; -} - -#ifdef CONFIG_DRIVER_TI_EMAC -void davinci_enable_emac(void) -{ - lpsc_on(DAVINCI_LPSC_EMAC); - lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); - lpsc_on(DAVINCI_LPSC_MDIO); - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0; - - /* Enable EMAC. */ - REG(PINMUX0) |= PINMUX0_EMACEN; -} -#endif - -void davinci_enable_i2c(void) -{ - lpsc_on(DAVINCI_LPSC_I2C); - - /* Enable I2C pin Mux */ - REG(PINMUX1) |= PINMUX1_I2C; -} - -void davinci_errata_workarounds(void) -{ - /* - * Workaround for TMS320DM6446 errata 1.3.22: - * PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset - * Revision(s) Affected: 1.3 and earlier - */ - REG(PSC_SILVER_BULLET) = 0; - - /* - * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR) - * as suggested in TMS320DM6446 errata 2.1.2: - * - * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions - * low priority modules can occupy the bus and prevent high priority - * modules like the VPSS from getting the required DDR2 throughput. - * A hex value of 0x20 should provide a good ARM (cache enabled) - * performance and still allow good utilization by the VPSS or other - * modules. - */ - REG(VBPR) = 0x20; -} +#endif /* have a DSP */ --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -59,6 +59,7 @@ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -34,6 +34,7 @@ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM644X /*=============*/ /* Memory Info */ /*=============*/ --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -35,6 +35,7 @@ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM644X /* EEPROM definitions for Atmel 24LC64 EEPROM chip */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -59,6 +59,7 @@ #define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */ #define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */ #define CONFIG_SYS_HZ 1000 +#define CONFIG_SOC_DM644X /*====================================================*/ /* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ /* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
participants (1)
-
David Brownell