[U-Boot] [PATCH] usb: gadget: fastboot: improve download progress bar
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com ---
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func; static unsigned int download_size; static unsigned int download_bytes; +static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; }
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) { + if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot)) { + num_of_dot = download_bytes / BYTES_PER_DOT; putc('.'); - if (!(download_bytes % (74 * BYTES_PER_DOT))) + if (!(num_of_dot % 74)) putc('\n'); } req->actual = 0; @@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0; + num_of_dot = 0;
printf("Starting download of %d bytes\n", download_size);
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func; static unsigned int download_size; static unsigned int download_bytes; +static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; }
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
- if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot)) {
num_of_dot = download_bytes / BYTES_PER_DOT;
if (!(download_bytes % (74 * BYTES_PER_DOT)))
if (!(num_of_dot % 74)) putc('\n');@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0;
- num_of_dot = 0;
Make it a 'download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)
Best regards, Marek Vasut
Hi Marek,
On 09/17/2014 06:10 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func; static unsigned int download_size; static unsigned int download_bytes; +static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = { .bLength = USB_DT_ENDPOINT_SIZE, @@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket; }
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
- if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot)) {
num_of_dot = download_bytes / BYTES_PER_DOT;
if (!(download_bytes % (74 * BYTES_PER_DOT)))
if (!(num_of_dot % 74)) putc('\n');@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0;
- num_of_dot = 0;
Make it a 'download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)
The download_bytes record the total amount of bytes transferred. And the download_bytes will print after finishing transfer.
Best regards, Marek Vasut
Best Regards, Bo Shen
On Wednesday, September 17, 2014 at 12:28:57 PM, Bo Shen wrote:
Hi Marek,
On 09/17/2014 06:10 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func;
static unsigned int download_size; static unsigned int download_bytes;
+static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = {
.bLength = USB_DT_ENDPOINT_SIZE,
@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket;
}
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
- if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot))
{ + num_of_dot = download_bytes / BYTES_PER_DOT;
putc('.');
if (!(download_bytes % (74 * BYTES_PER_DOT)))
if (!(num_of_dot % 74)) putc('\n');} req->actual = 0;
@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":");
download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0;
- num_of_dot = 0;
Make it a 'download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)
The download_bytes record the total amount of bytes transferred. And the download_bytes will print after finishing transfer.
So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
Hi Marek,
On 09/17/2014 07:16 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 12:28:57 PM, Bo Shen wrote:
Hi Marek,
On 09/17/2014 06:10 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func;
static unsigned int download_size; static unsigned int download_bytes;
+static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = {
.bLength = USB_DT_ENDPOINT_SIZE,@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket;
}
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
- if (download_bytes && ((download_bytes / BYTES_PER_DOT) > num_of_dot))
{ + num_of_dot = download_bytes / BYTES_PER_DOT;
putc('.');
if (!(download_bytes % (74 * BYTES_PER_DOT)))
if (!(num_of_dot % 74)) putc('\n');} req->actual = 0;
@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":");
download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0;
- num_of_dot = 0;
Make it a 'download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)
The download_bytes record the total amount of bytes transferred. And the download_bytes will print after finishing transfer.
So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
As I described in the commit message. If the transfer length is not exactly the same as the request length, then the old method "download_bytes % BYTES_PER_DOT" won't be 0 anymore, so for the following transfer, it won't print dot anymore.
Best Regards, Bo Shen
On Thursday, September 18, 2014 at 03:34:18 AM, Bo Shen wrote:
Hi Marek,
On 09/17/2014 07:16 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 12:28:57 PM, Bo Shen wrote:
Hi Marek,
On 09/17/2014 06:10 PM, Marek Vasut wrote:
On Wednesday, September 17, 2014 at 09:43:56 AM, Bo Shen wrote:
+CC Lukasz, this is his turf.
When download is ongoing, if the actual size of one transfer is not the same as BTYES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed.
So, improve the method to show the progress bar (print dot).
Signed-off-by: Bo Shen voice.shen@atmel.com
drivers/usb/gadget/f_fastboot.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..2f13bf0 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -51,6 +51,7 @@ static inline struct f_fastboot *func_to_fastboot(struct usb_function *f) static struct f_fastboot *fastboot_func;
static unsigned int download_size; static unsigned int download_bytes;
+static unsigned int num_of_dot;
static struct usb_endpoint_descriptor fs_ep_in = {
.bLength = USB_DT_ENDPOINT_SIZE,@@ -414,9 +415,10 @@ static void rx_handler_dl_image(struct usb_ep *ep, struct usb_request *req) req->length = ep->maxpacket;
}
- if (download_bytes && !(download_bytes % BYTES_PER_DOT)) {
- if (download_bytes && ((download_bytes / BYTES_PER_DOT) >
num_of_dot)) { + num_of_dot = download_bytes / BYTES_PER_DOT;
putc('.');
if (!(download_bytes % (74 * BYTES_PER_DOT)))
if (!(num_of_dot % 74)) putc('\n');} req->actual = 0;
@@ -431,6 +433,7 @@ static void cb_download(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":");
download_size = simple_strtoul(cmd, NULL, 16); download_bytes = 0;
- num_of_dot = 0;
Make it a 'download_total' and log the total amount of bytes transferred please, that way it can be re-used for other purposes in the future ; for example for printing how much data were already transferred ;-)
The download_bytes record the total amount of bytes transferred. And the download_bytes will print after finishing transfer.
So why can this not be used to indicate the total progress ? Because the transfeer speed is variating too much ?
As I described in the commit message. If the transfer length is not exactly the same as the request length, then the old method "download_bytes % BYTES_PER_DOT" won't be 0 anymore, so for the following transfer, it won't print dot anymore.
And can you not reset the "download_bytes" for each transfer ?
Maybe we're not even aligned on what "transfer" means, so we might want to sync on this word first. What does "transfer" mean in this case?
participants (2)
-
Bo Shen -
Marek Vasut