Did you download the version from hawkboard.org?
In that case, you should be able to follow the instructions on:
http://elinux.org/Hawkboard#Compiling_u-boot_.28bootloader.29
If you are using the git version of u-boot replace omapl_hawkboard_config with da850evm_config and try to boot that first. Then as a second step, you can add custom board support for the Hawkboard.
On Thu, Sep 2, 2010 at 15:45, Vaishali Dhakate vaishali.dhakate@sukrutsystems.com wrote:
Hi Tobias thank you for the reply ... I am using Fedora so I downloaded this ARM Toolchain.
http://fedoraproject.org/wiki/Architectures/ARM/CrossToolchain
Installed this toolchain successfully and able to cross compile code for ARM...
I downloaded u-boot source code ,extracted it... Now want to compile this source code using this ARM Toolchain that I installed ....
http://www.linuxfordevices.com/c/a/Linux-For-Devices-Articles/Introduction-t...
Now trying to figure out this using the above document... Not very clear... as to how to do this ... will read the README of u-boot .. Let me know ! Thanks and Regards Vaishali
On 9/1/10, Tobias Waldekranz (Knutsson) tobias.knutsson@gmail.com wrote:
You can find the official port of u-boot for the Hawkboard over at hawkboard.org, but if you want to build the latest version of u-boot that can be done as well.
The Hawkboard is very similar to the DA850 EVM so as a first step, you could simply build u-boot for that board and it should boot just fine.
On Tue, Aug 31, 2010 at 13:19, Vaishali Dhakate vaishali.dhakate@sukrutsystems.com wrote:
Hi , I am trying to cross compile some libraries for ARM board I will port a Linux OS to the hawkboard. Want to study u-boot specific to this board so I ll be able to do this. The first chore is to port u-boot on this board. PLz help me , I was going through the uboot readme which directed me to straight away mail and share my concern. Thanks for the help Regards Vaishali _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
--
Hälsningar/Regards Tobias Waldekranz
Dear "Tobias Waldekranz (Knutsson)",
please STOP full quoting / top posting.
Read http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
Hi, I am looking for the website where I could browse the u-boot source code for Hawkboard only. As I dont have access to Linux machine right now. plz tell. Thanks Vaishali.
On Fri, Sep 3, 2010 at 1:59 PM, Wolfgang Denk wd@denx.de wrote:
Dear "Tobias Waldekranz (Knutsson)",
please STOP full quoting / top posting.
Read http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Monday is an awful way to spend one seventh of your life.
Hi , I am new to Linux crosscompilation ...u-boot and Porting Linux . I plan to do this for Hawk board. currently I am reading hapazardously.. http://elinux.org/Hawkboard%C2%A0Mainly from this source.tried to follow these , alright ... still want to make sure I have the fundamentals in place before I begin my work.Also want to do my work in a planned and timely manner .less of timewaste reading through things and not understanding becoz the fundamentals are not present. This is how far I have covered till now ... going through the u-boot compilation and understanding boot process as a general topic , trying to understand Bootloader role , went through u-boot readme and the Presentation Document on U-boot.
http://www.denx.de/twiki/bin/view/UBootdoc/Presentation .
did some topics like initramdisk and ramdisk ..as I didnt know these. have knowledge of ARM but not very strong. Have to finally port on ARM the Linux image probably Android on the hawkboard. Plan to go through the DLUG Manual . and Need to study ARM 9ejs and Hawkboard and peripherals in Detail also the drivers for these...maybe even undetsand how much of the Linux and the code of Linux as an overview of how mch of this kernel gets finally on the hawkboard.
Any helpful suggesstions for planning my work.Also wht topics do I seem to have missed out . which is the quicked and efficeint way to do my work in short time.
Thanks and Regards Vaishali
On Tue, Sep 7, 2010 at 6:13 PM, Vaishali Dhakate vaishali.dhakate@sukrutsystems.com wrote:
Hi, I am looking for the website where I could browse the u-boot source code for Hawkboard only. As I dont have access to Linux machine right now. plz tell. Thanks Vaishali.
On Fri, Sep 3, 2010 at 1:59 PM, Wolfgang Denk wd@denx.de wrote:
Dear "Tobias Waldekranz (Knutsson)",
please STOP full quoting / top posting.
Read http://www.netmeister.org/news/learn2quote.html
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de Monday is an awful way to spend one seventh of your life.
On Tue, 7 Sep 2010 18:13:12 +0530, Vaishali Dhakate vaishali.dhakate@sukrutsystems.com wrote:
Hi, I am looking for the website where I could browse the u-boot source code for Hawkboard only. As I dont have access to Linux machine right now. plz tell. Thanks Vaishali.
Aren't they here?
http://git.denx.de/?p=u-boot.git;a=forks
Bas.
Dear Vaishali Dhakate,
you are violating a number of netiquette rules; this does not increase the likelihood for a helpful reply.
- You hijack a mail thread. - You top post / full quote (and even a message where I asked the OP _not_ to do exactly this! and some more.
Please read http://www.netmeister.org/news/learn2quote.html and http://catb.org/esr/faqs/smart-questions.html before posting further questions here.
Thanks.
Wolfgang Denk
participants (4)
-
Bas Mevissen -
Tobias Waldekranz (Knutsson) -
Vaishali Dhakate -
Wolfgang Denk