Although the datasheet mentions seperate smi registers for each port, using Port 1 smi register to access ethernet phys does not work. Hence only Port 0 smi register should be used to access all devices connected to the smi bus. This behavior is consistant with the mv643xx driver in the linux kernel.

Signed-off-by: Siddarth Gore gores@marvell.com Acked-by: Prafulla Wadaskar prafulla@marvell.com --- drivers/net/kirkwood_egiga.c | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 07a86cd..2ad7fea 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -39,6 +39,7 @@ #include "kirkwood_egiga.h"

#define KIRKWOOD_PHY_ADR_REQUEST 0xee +#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi)

/* * smi_reg_read - miiphy_read callback function. @@ -76,7 +77,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) /* wait till the SMI is not busy */ do { /* read smi register */ - smi_reg = KWGBEREG_RD(regs->smi); + smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -EFAULT; @@ -89,14 +90,14 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) | KWGBE_PHY_SMI_OPCODE_READ;

/* write the smi register */ - KWGBEREG_WR(regs->smi, smi_reg); + KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);

/*wait till read value is ready */ timeout = KWGBE_PHY_SMI_TIMEOUT;

do { /* read smi register */ - smi_reg = KWGBEREG_RD(regs->smi); + smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI read ready timeout\n", __FUNCTION__); @@ -107,7 +108,7 @@ static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data) /* Wait for the data to update in the SMI register */ for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ;

- *data = (u16) (KWGBEREG_RD(regs->smi) & KWGBE_PHY_SMI_DATA_MASK); + *data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK);

debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr, reg_ofs, *data); @@ -150,7 +151,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) timeout = KWGBE_PHY_SMI_TIMEOUT; do { /* read smi register */ - smi_reg = KWGBEREG_RD(regs->smi); + smi_reg = KWGBEREG_RD(KWGBE_SMI_REG); if (timeout-- == 0) { printf("Err..(%s) SMI busy timeout\n", __FUNCTION__); return -ETIME; @@ -164,7 +165,7 @@ static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data) smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ;

/* write the smi register */ - KWGBEREG_WR(regs->smi, smi_reg); + KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);

return 0; }