[U-Boot] [PATCH] sf: Disable 4-KB erase command for SPANSION S25FS128
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION + +inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) +{ + switch (jedec) { + case 0x0219: + case 0x0220: + case 0x2018: + if ((ext_jedec & 0xff00) == 0x4d00) + return 1; + default:; + } + + return 0; +} + static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */ - if ((jedec == 0x0219 || (jedec == 0x0220)) && - (ext_jedec & 0xff00) == 0x4d00) { + if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael,
From some datasheet for spansion flash,
it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
Like: diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..cfe3649 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1072,8 +1072,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */ - if ((jedec == 0x0219 || (jedec == 0x0220)) && - (ext_jedec & 0xff00) == 0x4d00) { + if (idcode[0] == SPI_FLASH_CFI_MFR_SPANSION) { int ret; u8 id[6];
How about your think?
Hi
On Wed, Jun 22, 2016 at 10:00:49AM +0000, Yao Yuan wrote:
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael, From some datasheet for spansion flash, it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
Like: diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..cfe3649 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1072,8 +1072,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
if ((jedec == 0x0219 || (jedec == 0x0220)) &&(ext_jedec & 0xff00) == 0x4d00) {
if (idcode[0] == SPI_FLASH_CFI_MFR_SPANSION) { int ret; u8 id[6];How about your think?
For me is fine if you are sure
Michael
On 06/22/2016 06:08 PM, Michael Trimarchi wrote:
On Wed, Jun 22, 2016 at 10:00:49AM +0000, Yao Yuan wrote:
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael, From some datasheet for spansion flash, it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
I'm not sure what's the offset for imx7d, but for NXP LS series SOC. The RCW_PBI offset: 0x0 The Uboot offset is defined by RCW_PBI code.(Such as 0x10000)
Like: diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..cfe3649 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1072,8 +1072,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
if ((jedec == 0x0219 || (jedec == 0x0220)) &&(ext_jedec & 0xff00) == 0x4d00) {
if (idcode[0] == SPI_FLASH_CFI_MFR_SPANSION) { int ret; u8 id[6];How about your think?
For me is fine if you are sure
Michael
-- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |
Hi Ye.Li
On Wed, Jun 22, 2016 at 10:14:29AM +0000, Yao Yuan wrote:
On 06/22/2016 06:08 PM, Michael Trimarchi wrote:
On Wed, Jun 22, 2016 at 10:00:49AM +0000, Yao Yuan wrote:
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael, From some datasheet for spansion flash, it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
I'm not sure what's the offset for imx7d, but for NXP LS series SOC. The RCW_PBI offset: 0x0 The Uboot offset is defined by RCW_PBI code.(Such as 0x10000)
I have seen that the booting from QSPI come from you. Do you have an idea about imx7d booting from QSPI?
Michael
Like: diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..cfe3649 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -1072,8 +1072,7 @@ int spi_flash_scan(struct spi_flash *flash) * sector that is not overlaid by the parameter sectors. * The uniform sector erase command has no effect on parameter sectors. */
if ((jedec == 0x0219 || (jedec == 0x0220)) &&(ext_jedec & 0xff00) == 0x4d00) {
if (idcode[0] == SPI_FLASH_CFI_MFR_SPANSION) { int ret; u8 id[6];How about your think?
For me is fine if you are sure
Michael
-- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |
On 22 June 2016 at 15:44, Yao Yuan yao.yuan@nxp.com wrote:
On 06/22/2016 06:08 PM, Michael Trimarchi wrote:
On Wed, Jun 22, 2016 at 10:00:49AM +0000, Yao Yuan wrote:
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash)
- sector that is not overlaid by the parameter sectors.
- The uniform sector erase command has no effect on parameter
sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael, From some datasheet for spansion flash, it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
Don't understand either does this "Disable 4-KB erase command for SPANSION S25FS-S family" (spansion_s25fss_disable_4KB_erase) is an issue workaround or something like hybrid configuration feature for spansion parts?
thanks!
Hi
On Sat, Aug 6, 2016 at 4:37 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On 22 June 2016 at 15:44, Yao Yuan yao.yuan@nxp.com wrote:
On 06/22/2016 06:08 PM, Michael Trimarchi wrote:
On Wed, Jun 22, 2016 at 10:00:49AM +0000, Yao Yuan wrote:
On 06/22/2016 03:59 PM, Michael Trimarchi wrote:
The S25FS128 is part of S25FS-S family physical sectors may be configured as a hybrid combination of eight 4-kB parameter sectors at the top or bottom of the address space with all but one of the remaining sectors being uniform size. This rework a bit commit
80c1bfd2332e71dfe669cac53ba06b7435a7ca39
and add this jedec part number
Signed-off-by: Michael Trimarchi michael@amarulasolutions.com
drivers/mtd/spi/spi_flash.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 64d4e0f..c993588 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -972,6 +972,21 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) #endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
#ifdef CONFIG_SPI_FLASH_SPANSION
+inline int is_spansion_s25fss_family(u16 jedec, u16 ext_jedec) {
- switch (jedec) {
- case 0x0219:
- case 0x0220:
- case 0x2018:
if ((ext_jedec & 0xff00) == 0x4d00)return 1;- default:;
- }
- return 0;
+}
static int spansion_s25fss_disable_4KB_erase(struct spi_slave *spi) { u8 cmd[4]; @@ -1072,8 +1087,7 @@ int spi_flash_scan(struct spi_flash *flash)
- sector that is not overlaid by the parameter sectors.
- The uniform sector erase command has no effect on parameter
sectors. */
- if ((jedec == 0x0219 || (jedec == 0x0220)) &&
(ext_jedec & 0xff00) == 0x4d00) {
- if (is_spansion_s25fss_family(jedec, ext_jedec)) { int ret; u8 id[6];
--
Hi Michael, From some datasheet for spansion flash, it seems all the spansion S25FS family should disable 4kb. So how about just judge the idcode[0]?
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
Don't understand either does this "Disable 4-KB erase command for SPANSION S25FS-S family" (spansion_s25fss_disable_4KB_erase) is an issue workaround or something like hybrid configuration feature for spansion parts?
Please refer here.
Michael
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.
On 6 August 2016 at 20:10, Michael Trimarchi michael@amarulasolutions.com wrote:
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
Don't understand either does this "Disable 4-KB erase command for SPANSION S25FS-S family" (spansion_s25fss_disable_4KB_erase) is an issue workaround or something like hybrid configuration feature for spansion parts?
Please refer here.
Thanks for the pdf, So the lower 8 4k sectors are unaffected even if we do sector erase(d8h)? What if we do 4k erase(20h) whole flash all effected?
thanks!
Hi
On Sat, Aug 6, 2016 at 5:08 PM, Jagan Teki jagannadh.teki@gmail.com wrote:
On 6 August 2016 at 20:10, Michael Trimarchi michael@amarulasolutions.com wrote:
I understand your point but I don't have enough part number and I can only to test on this one. I will verify this patch too and put my review and drop my personal one. Anyway can you ask if the first 0x8000 are considered by boot rom? I'm trying to boot from qspi an imx7d board and I create the parameter using the files/qspi-nor-spansion-s25fl128s-config but not sure if I need to flash from 0x400 or from 0x8400. And then I think that bootloader should go from 0x1000 or from 0x9000 correct? Then from BOOT_FROM I choose qspi but what is the DEFAULT_ADDRESS 0x1000 or 0x400?
Don't understand either does this "Disable 4-KB erase command for SPANSION S25FS-S family" (spansion_s25fss_disable_4KB_erase) is an issue workaround or something like hybrid configuration feature for spansion parts?
Please refer here.
Thanks for the pdf, So the lower 8 4k sectors are unaffected even if we do sector erase(d8h)? What if we do 4k erase(20h) whole flash all effected?
1) correct 2) I need to check
If we send this command we just remap it in the same way
Michael
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.
participants (3)
-
Jagan Teki -
Michael Trimarchi -
Yao Yuan