[U-Boot] [PATCH] ehci-omap: fix for enabling the correct usb port
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Signed-off-by: Jeroen Hofstee jeroen@myspectrum.nl --- drivers/usb/host/ehci-omap.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 00f787f..1ed7710 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -200,12 +200,12 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata) if (is_ehci_phy_mode(usbhs_pdata->port_mode[1])) clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS); else - setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS); + setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS);
if (is_ehci_phy_mode(usbhs_pdata->port_mode[2])) clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); else - setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS); + setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); } else if (rev == OMAP_USBHS_REV2) { clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR), OMAP4_UHH_HOSTCONFIG_APP_START_CLK);
On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote:
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
I don't see any difference between the first usb start and the following resets, should there have been? Clearly, there's a problem, but lets see if we can fix all of it in time.. Thanks!
On 04/20/2012 12:42 AM, Tom Rini wrote:
I don't see any difference between the first usb start and the following resets, should there have been? Clearly, there's a problem, but lets see if we can fix all of it in time.. Thanks!
Sorry, it was incomplete. The resets are just to indicate it is never working, below is the complete listing. With the patch at least the usb works, it needs an additional reset though (hence the resets without the patch as well).
Regards, Jeroen
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
=== with the patch === !note it needs usb reset
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:48:37)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found
On 20/04/2012 00:42, Tom Rini wrote:
On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote:
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
I don't see any difference between the first usb start and the following resets, should there have been? Clearly, there's a problem, but lets see if we can fix all of it in time.. Thanks!
The issue was raised during the review of Govindraj's patch, it seems the wrong version was picked up.
Acked-by : Stefano Babic sbabic@denx.de
Can you apply it for the release (this is clearly a fix) ?
Best regards, Stefano Babic
On Fri, Apr 20, 2012 at 09:42:46AM +0200, Stefano Babic wrote:
On 20/04/2012 00:42, Tom Rini wrote:
On Thu, Apr 19, 2012 at 11:25:18PM +0200, Jeroen Hofstee wrote:
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
I don't see any difference between the first usb start and the following resets, should there have been? Clearly, there's a problem, but lets see if we can fix all of it in time.. Thanks!
The issue was raised during the review of Govindraj's patch, it seems the wrong version was picked up.
Acked-by : Stefano Babic sbabic@denx.de
Can you apply it for the release (this is clearly a fix) ?
OK:
Acked-by: Tom Rini trini@ti.com
Wolfgang, can you pick this up out of patchwork? I've assigned it to you. Thanks!
On Fri, Apr 20, 2012 at 2:55 AM, Jeroen Hofstee jeroen@myspectrum.nl wrote:
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Yes it was a typo and Looks like the corrected patch was not picked up as in here: http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/124620
FWIW
Acked-by: Govindraj.R <govindraj.raja <at> ti.com>
Signed-off-by: Jeroen Hofstee jeroen@myspectrum.nl
drivers/usb/host/ehci-omap.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 00f787f..1ed7710 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -200,12 +200,12 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata) if (is_ehci_phy_mode(usbhs_pdata->port_mode[1])) clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS); else
- setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
- setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS);
if (is_ehci_phy_mode(usbhs_pdata->port_mode[2])) clrbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); else
- setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS);
- setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS);
} else if (rev == OMAP_USBHS_REV2) { clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR), OMAP4_UHH_HOSTCONFIG_APP_START_CLK); -- 1.7.5.4
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Dear Jeroen Hofstee,
In message 1334870718-24065-1-git-send-email-jeroen@myspectrum.nl you wrote:
This is just a patch for the problem reported here: http://lists.denx.de/pipermail/u-boot/2012-February/117580.html originally reported by Igor.
"Looks like this is copy paste error from my side,(for port2/3 it should have been bypass for port2/3 rather its port1 set in bypass mode)"
I only submit the patch since it is missing in 2012.04-rc3 while the twister board depends on it. Maybe it is already somewhere in the reposistory, but I cannot find it.
note: the twister boards still needs an additional `usb reset`, don't know why.
U-Boot 2012.04-rc3-dirty (Apr 19 2012 - 21:38:38)
AM35XX-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 Mhz TAM3517 TWISTER Board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Die ID #746c0000000000000155dc1405011024 Net: DaVinci-EMAC, smc911x-0 Hit any key to stop autoboot: 0 twister => usb start (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found twister => usb reset (Re)start USB... USB: Register 1313 NbrPorts 3 USB EHCI 1.00 scanning bus for devices... 1 USB Device(s) found scanning bus for storage devices... 0 Storage Device(s) found
Signed-off-by: Jeroen Hofstee jeroen@myspectrum.nl
drivers/usb/host/ehci-omap.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
participants (6)
-
Govindraj -
Jeroen Hofstee -
Jeroen Hofstee -
Stefano Babic -
Tom Rini -
Wolfgang Denk