Support loading clk speed via DM instead of requiring ad-hoc code.

Signed-off-by: Simon Goldschmidt simon.k.r.goldschmidt@gmail.com ---

Changes in v3: - load ref_clk_hz only once in cadence_spi_ofdata_to_platdata instead of loading it every time in cadence_spi_write_speed

Changes in v2: - check return value of clk_get_rate for error

drivers/spi/cadence_qspi.c | 21 +++++++++++++++++++-- drivers/spi/cadence_qspi.h | 1 + 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index e2e54cd277..8fd23a7702 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -5,6 +5,7 @@ */

#include <common.h> +#include <clk.h> #include <dm.h> #include <fdtdec.h> #include <malloc.h> @@ -24,10 +25,10 @@ static int cadence_spi_write_speed(struct udevice *bus, uint hz) struct cadence_spi_priv *priv = dev_get_priv(bus);

cadence_qspi_apb_config_baudrate_div(priv->regbase, - CONFIG_CQSPI_REF_CLK, hz); + plat->ref_clk_hz, hz);

/* Reconfigure delay timing if speed is changed. */ - cadence_qspi_apb_delay(priv->regbase, CONFIG_CQSPI_REF_CLK, hz, + cadence_qspi_apb_delay(priv->regbase, plat->ref_clk_hz, hz, plat->tshsl_ns, plat->tsd2d_ns, plat->tchsh_ns, plat->tslch_ns);

@@ -294,6 +295,8 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus) { struct cadence_spi_platdata *plat = bus->platdata; ofnode subnode; + struct clk clk; + int ret;

plat->regbase = (void *)devfdt_get_addr_index(bus, 0); plat->ahbbase = (void *)devfdt_get_addr_index(bus, 1); @@ -325,6 +328,20 @@ static int cadence_spi_ofdata_to_platdata(struct udevice *bus) plat->tchsh_ns = ofnode_read_u32_default(subnode, "cdns,tchsh-ns", 20); plat->tslch_ns = ofnode_read_u32_default(subnode, "cdns,tslch-ns", 20);

+ ret = clk_get_by_index(bus, 0, &clk); + if (ret) { +#ifdef CONFIG_CQSPI_REF_CLK + plat->ref_clk_hz = CONFIG_CQSPI_REF_CLK; +#else + return ret; +#endif + } else { + plat->ref_clk_hz = clk_get_rate(&clk); + clk_free(&clk); + if (IS_ERR_VALUE(plat->ref_clk_hz)) + return plat->ref_clk_hz; + } + debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n", __func__, plat->regbase, plat->ahbbase, plat->max_hz, plat->page_size); diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h index 20cceca239..99dee75bbd 100644 --- a/drivers/spi/cadence_qspi.h +++ b/drivers/spi/cadence_qspi.h @@ -16,6 +16,7 @@ #define CQSPI_READ_CAPTURE_MAX_DELAY 16

struct cadence_spi_platdata { + unsigned int ref_clk_hz; unsigned int max_hz; void *regbase; void *ahbbase;