[PATCH 1/4] [v2] configs: ls1088aqds.h: Update mc size in env
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- changes for v2: updated MC fw, dpc address
include/configs/ls1088aqds.h | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d032a3d111..78ccc2dc5b 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -386,7 +386,7 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x1000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;" \ + "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x200000;" \ "sf read 0xa0640000 0x640000 0x4000; esbc_validate 0xa0640000;" \ "sf read 0xa0e00000 0xe00000 0x100000;" \ "sf read 0xa0680000 0x680000 0x4000;esbc_validate 0xa0680000;" \ @@ -395,13 +395,13 @@ unsigned long get_board_ddr_clk(void); #else /* if !(CONFIG_NXP_ESBC) */ #ifdef CONFIG_TFABOOT #define QSPI_MC_INIT_CMD \ - "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define IFC_MC_INIT_CMD \ "fsl_mc start mc 0x580A00000 0x580E00000\0"
@@ -421,9 +421,9 @@ unsigned long get_board_ddr_clk(void); "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "kernel_size_sd=0x14000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" \ "BOARD=ls1088aqds\0" \ "scriptaddr=0x80000000\0" \ @@ -480,9 +480,9 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x1000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #elif defined(CONFIG_SD_BOOT) #undef CONFIG_EXTRA_ENV_SETTINGS @@ -498,9 +498,9 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x8000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x14000\0" \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else /* NOR BOOT */ #undef CONFIG_EXTRA_ENV_SETTINGS
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- changes for v2: updated MC fw, dpc address
include/configs/ls1088ardb.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 5ade0eb439..ad3043bbdb 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -261,45 +261,45 @@ /* Initial environment variables */ #ifdef CONFIG_TFABOOT #define QSPI_MC_INIT_CMD \ - "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ + "sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ "env exists secureboot && " \ "sf read 0x80640000 0x640000 0x40000 && " \ "sf read 0x80680000 0x680000 0x40000 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "fsl_mc start mc 0x80a00000 0x80e00000\0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" + "fsl_mc start mc 0x80a00000 0x80e00000\0" #else #if defined(CONFIG_QSPI_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ - "sf read 0x80100000 0xE00000 0x100000;" \ + "mcinitcmd=sf probe 0:0;sf read 0x80a00000 0xA00000 0x200000;" \ + "sf read 0x80e00000 0xE00000 0x100000;" \ "env exists secureboot && " \ "sf read 0x80640000 0x640000 0x40000 && " \ "sf read 0x80680000 0x680000 0x40000 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000\0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000\0" #endif #endif /* CONFIG_TFABOOT */
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- changes for v2: updated MC fw, dpc address
include/configs/ls2080aqds.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 41c1a86743..8bfe4b9811 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -340,7 +340,7 @@ unsigned long get_board_ddr_clk(void); #else #ifdef CONFIG_TFABOOT #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "fsl_mc start mc 0x80a00000 0x80e00000\0" #define IFC_MC_INIT_CMD \ @@ -413,9 +413,9 @@ unsigned long get_board_ddr_clk(void); "kernel_start=0x8000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x14000\0" \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000 \0" #else #define CONFIG_EXTRA_ENV_SETTINGS \
Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain priyanka.jain@nxp.com --- changes for v2: updated MC fw, dpc address
include/configs/ls2080ardb.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index f2dc495fbb..49c2cc573b 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -314,11 +314,11 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000; " \ - "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80a00000 0xa00000 0x200000; " \ "sf read 0x80e00000 0xe00000 0x100000; " \ "fsl_mc start mc 0x80a00000 0x80e00000 \0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ @@ -339,19 +339,19 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000; " \ - "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80a00000 0xa00000 0x200000; " \ "sf read 0x80e00000 0xe00000 0x100000; " \ "fsl_mc start mc 0x80a00000 0x80e00000 \0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000\0" #else #define MC_INIT_CMD \
participants (1)
-
Priyanka Jain