[PATCH 1/3] doc: imx93_var_som: Adjust the underline length
From: Fabio Estevam festevam@denx.de
Adjust the underline length so that it matches the title length.
Signed-off-by: Fabio Estevam festevam@denx.de --- doc/board/variscite/imx93_var_som.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/doc/board/variscite/imx93_var_som.rst b/doc/board/variscite/imx93_var_som.rst index 2225a772e375..4951afd2dad6 100644 --- a/doc/board/variscite/imx93_var_som.rst +++ b/doc/board/variscite/imx93_var_som.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0+
imx93_var_som -======================= +=============
U-Boot for the Variscite VAR-SOM-MX93 Symphony evaluation board
@@ -38,7 +38,7 @@ Get the DDR firmware $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Get ahab-container.img ---------------------------------------- +----------------------
.. code-block:: bash
From: Fabio Estevam festevam@denx.de
All i.MX93 targets rely on using binman to generate the U-Boot binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevam festevam@denx.de --- arch/arm/mach-imx/imx9/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index 76c4129d79e0..961d6f527ab6 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -12,6 +12,7 @@ config IMX9_LOW_DRIVE_MODE
config IMX9 bool + select BINMAN select HAS_CAAM select ROM_UNIFIED_SECTIONS
@@ -29,12 +30,10 @@ choice
config TARGET_IMX93_11X11_EVK bool "imx93_11x11_evk" - select BINMAN select IMX93
config TARGET_IMX93_VAR_SOM bool "imx93_var_som" - select BINMAN select IMX93 select IMX9_LPDDR4X
On 1/9/2024 5:11 AM, Fabio Estevam wrote:
From: Fabio Estevamfestevam@denx.de
All i.MX93 targets rely on using binman to generate the U-Boot binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevamfestevam@denx.de
Reviewed-by: Peng Fan peng.fan@nxp.com
From: Fabio Estevam festevam@denx.de
All i.MX8M targets rely on using binman to generate the U-Boot binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevam festevam@denx.de --- arch/arm/mach-imx/imx8m/Kconfig | 39 +-------------------------------- 1 file changed, 1 insertion(+), 38 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 67da198956c2..b1937198402f 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -2,6 +2,7 @@ if ARCH_IMX8M
config IMX8M bool + select BINMAN select GICV3 if ARMV8_PSCI select HAS_CAAM select ROM_UNIFIED_SECTIONS @@ -41,13 +42,11 @@ choice
config TARGET_IMX8MQ_CM bool "Ronetix iMX8MQ-CM SoM" - select BINMAN select IMX8MQ select IMX8M_LPDDR4
config TARGET_IMX8MQ_EVK bool "imx8mq_evk" - select BINMAN select IMX8MQ select IMX8M_LPDDR4 select FSL_CAAM @@ -56,26 +55,22 @@ config TARGET_IMX8MQ_EVK
config TARGET_IMX8MQ_PHANBELL bool "imx8mq_phanbell" - select BINMAN select IMX8MQ select IMX8M_LPDDR4
config TARGET_IMX8MQ_REFORM2 bool "imx8mq_reform2" - select BINMAN select IMX8MQ select IMX8M_LPDDR4
config TARGET_IMX8MM_DATA_MODUL_EDM_SBC bool "Data Modul eDM SBC i.MX8M Mini" - select BINMAN select IMX8MM select IMX8M_LPDDR4 select SUPPORT_SPL
config TARGET_IMX8MM_EVK bool "imx8mm LPDDR4 EVK board" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -85,7 +80,6 @@ config TARGET_IMX8MM_EVK
config TARGET_IMX8MM_ICORE_MX8MM bool "Engicam i.Core MX8M Mini SOM" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -104,21 +98,18 @@ config TARGET_IMX8MM_ICORE_MX8MM
config TARGET_IMX8MM_MX8MENLO bool "Support i.MX8M Mini MX8Menlo board based on Toradex Verdin SoM" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_IMX8MM_PHG bool "i.MX8MM PHG board" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_IMX8MM_VENICE bool "Support Gateworks Venice iMX8M Mini module" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -130,7 +121,6 @@ config TARGET_IMX8MM_VENICE
config TARGET_KONTRON_MX8MM bool "Kontron Electronics N80xx" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -140,21 +130,18 @@ config TARGET_KONTRON_MX8MM
config TARGET_IMX8MN_BSH_SMM_S2 bool "imx8mn-bsh-smm-s2" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_DDR3L
config TARGET_IMX8MN_BSH_SMM_S2PRO bool "imx8mn-bsh-smm-s2pro" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_DDR3L
config TARGET_IMX8MN_EVK bool "imx8mn LPDDR4 EVK board" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_LPDDR4 @@ -163,7 +150,6 @@ config TARGET_IMX8MN_EVK
config TARGET_IMX8MN_DDR4_EVK bool "imx8mn DDR4 EVK board" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_DDR4 @@ -172,7 +158,6 @@ config TARGET_IMX8MN_DDR4_EVK
config TARGET_IMX8MN_VENICE bool "Support Gateworks Venice iMX8M Nano module" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_LPDDR4 @@ -184,14 +169,12 @@ config TARGET_IMX8MN_VENICE
config TARGET_IMX8MP_DATA_MODUL_EDM_SBC bool "Data Modul eDM SBC i.MX8M Plus" - select BINMAN select IMX8MP select IMX8M_LPDDR4 select SUPPORT_SPL
config TARGET_IMX8MP_BEACON bool "imx8mm Beacon Embedded devkit" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 @@ -201,21 +184,18 @@ config TARGET_IMX8MP_BEACON
config TARGET_IMX8MP_DEBIX_MODEL_A bool "Polyhex i.MX8M Plus Debix Model A SBC" - select BINMAN select IMX8MP select IMX8M_LPDDR4 select SUPPORT_SPL
config TARGET_IMX8MP_DH_DHCOM_PDK2 bool "DH electronics DHCOM Premium Developer Kit (2) i.MX8M Plus" - select BINMAN select IMX8MP select IMX8M_LPDDR4 select SUPPORT_SPL
config TARGET_IMX8MP_ICORE_MX8MP bool "Engicam i.Core MX8M Plus SOM" - select BINMAN select IMX8MP select IMX8M_LPDDR4 select SUPPORT_SPL @@ -229,7 +209,6 @@ config TARGET_IMX8MP_ICORE_MX8MP
config TARGET_IMX8MP_EVK bool "imx8mp LPDDR4 EVK board" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 @@ -239,7 +218,6 @@ config TARGET_IMX8MP_EVK
config TARGET_IMX8MP_VENICE bool "Support Gateworks Venice iMX8M Plus module" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4 @@ -251,13 +229,11 @@ config TARGET_IMX8MP_VENICE
config TARGET_PICO_IMX8MQ bool "Support Technexion Pico iMX8MQ" - select BINMAN select IMX8MQ select IMX8M_LPDDR4
config TARGET_IMX8MN_VAR_SOM bool "Variscite imx8mn_var_som" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_DDR4 @@ -268,27 +244,23 @@ config TARGET_IMX8MN_VAR_SOM
config TARGET_KONTRON_PITX_IMX8M bool "Support Kontron pITX-imx8m" - select BINMAN select IMX8MQ select IMX8M_LPDDR4
config TARGET_VERDIN_IMX8MM bool "Support Toradex Verdin iMX8M Mini module" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_VERDIN_IMX8MP bool "Support Toradex Verdin iMX8M Plus module" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_IMX8MM_BEACON bool "imx8mm Beacon Embedded devkit" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -298,7 +270,6 @@ config TARGET_IMX8MM_BEACON
config TARGET_IMX8MN_BEACON bool "imx8mn Beacon Embedded devkit" - select BINMAN select IMX8MN select SUPPORT_SPL select IMX8M_LPDDR4 @@ -308,21 +279,18 @@ config TARGET_IMX8MN_BEACON
config TARGET_PHYCORE_IMX8MM bool "PHYTEC PHYCORE i.MX8MM" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_PHYCORE_IMX8MP bool "PHYTEC PHYCORE i.MX8MP" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_IMX8MM_CL_IOT_GATE bool "CompuLab iot-gate-imx8" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -330,7 +298,6 @@ config TARGET_IMX8MM_CL_IOT_GATE
config TARGET_IMX8MM_CL_IOT_GATE_OPTEE bool "CompuLab iot-gate-imx8 with optee support" - select BINMAN select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 @@ -338,28 +305,24 @@ config TARGET_IMX8MM_CL_IOT_GATE_OPTEE
config TARGET_IMX8MP_RSB3720A1_4G bool "Support i.MX8MP RSB3720A1 4G" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_IMX8MP_RSB3720A1_6G bool "Support i.MX8MP RSB3720A1 6G" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_MSC_SM2S_IMX8MP bool "MSC SMARC2 i.MX8MPLUS" - select BINMAN select IMX8MP select SUPPORT_SPL select IMX8M_LPDDR4
config TARGET_LIBREM5 bool "Purism Librem5 Phone" - select BINMAN select IMX8MQ select SUPPORT_SPL select IMX8M_LPDDR4
On 1/9/2024 5:11 AM, Fabio Estevam wrote:
From: Fabio Estevamfestevam@denx.de
All i.MX8M targets rely on using binman to generate the U-Boot binary.
Select it at the SoC level instead of per board.
Signed-off-by: Fabio Estevamfestevam@denx.de
Reviewed-by: Peng Fan peng.fan@nxp.com
On 1/9/2024 5:11 AM, Fabio Estevam wrote:
From: Fabio Estevam festevam@denx.de
Adjust the underline length so that it matches the title length.
Signed-off-by: Fabio Estevam festevam@denx.de
Reviewed-by: Peng Fan peng.fan@nxp.com
On Mon, Jan 8, 2024 at 6:11 PM Fabio Estevam festevam@gmail.com wrote:
From: Fabio Estevam festevam@denx.de
Adjust the underline length so that it matches the title length.
Signed-off-by: Fabio Estevam festevam@denx.de
Applied all, thanks.
participants (2)
-
Fabio Estevam -
Peng Fan