po 24. 8. 2020 v 14:46 odesílatel Michal Simek michal.simek@xilinx.com napsal:

Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms.

This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers").

Signed-off-by: Michal Simek michal.simek@xilinx.com

drivers/serial/Kconfig | 4 ++-- drivers/spi/Kconfig | 3 --- drivers/usb/host/Kconfig | 3 +-- 3 files changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index e344677f91f6..b4805a2e4ea4 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -734,7 +734,7 @@ config UNIPHIER_SERIAL

config XILINX_UARTLITE bool "Xilinx Uarlite support"

•   depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || 4xx)
  

•   depends on DM_SERIAL
    help
      If you have a Xilinx based board and want to use the uartlite
      serial ports, say Y to this option. If unsure, say N.
  

@@ -802,7 +802,7 @@ config STM32_SERIAL

config ZYNQ_SERIAL bool "Cadence (Xilinx Zynq) UART support"

•   depends on DM_SERIAL && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_ZYNQMP_R5)
  

•   depends on DM_SERIAL
    help
      This driver supports the Cadence UART. It is found e.g. in Xilinx
      Zynq/ZynqMP.
  

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3fc2d0674ae4..5df97c80fa51 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -407,7 +407,6 @@ config XILINX_SPI

config ZYNQ_SPI bool "Zynq SPI driver"

•   depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
    help
      Enable the Zynq SPI driver. This driver can be used to
      access the SPI NOR flash on platforms embedding this Zynq
  

@@ -415,7 +414,6 @@ config ZYNQ_SPI

config ZYNQ_QSPI bool "Zynq QSPI driver"

•   depends on ARCH_ZYNQ
    imply SPI_FLASH_BAR
    help
      Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
  

@@ -425,7 +423,6 @@ config ZYNQ_QSPI

config ZYNQMP_GQSPI bool "Configure ZynqMP Generic QSPI"

•   depends on ARCH_ZYNQMP || ARCH_VERSAL
    help
      This option is used to enable ZynqMP QSPI controller driver which
      is used to communicate with qspi flash devices.
  

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1c374a7bd809..4eb7b34e245f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -200,8 +200,7 @@ config USB_EHCI_TEGRA

config USB_EHCI_ZYNQ bool "Support for Xilinx Zynq on-chip EHCI USB controller"

•   depends on ARCH_ZYNQ
  

•   default y
  

•   default y if ARCH_ZYNQ
    ---help---
      Enable support for Zynq on-chip EHCI USB controller
  
  

-- 2.28.0

Applied. M