[U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
From e28c5e917f9504b724b6587287ad9e1eb0682b11 Mon Sep 17 00:00:00 2001
From: Syed Mohammed Khasim khasim@ti.com Date: Sat, 9 Jan 2010 09:40:32 +0530 Subject: [PATCH] Add 720Mhz support for Beagle Rev C4
Use the Generic TWL and Clock APIs to get beagle Rev C4 running at 720Mhz
Signed-off-by: Syed Mohammed Khasim khasim@ti.com --- board/ti/beagle/beagle.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 0def5a6..7985ee9 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -122,9 +122,27 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ beagle_identify(); + twl4030_power_init(); twl4030_led_init();
+ if (beagle_revision == REVISION_C4) { + + /* Select TWL4030 VSEL to support 720Mhz */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, + VAUX2_VSEL_18, + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, + DEV_GRP_P1); + + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDD1_VSEL, + VDD1_VSEL_14, + TWL4030_PM_RECEIVER_VDD1_DEV_GRP, + DEV_GRP_P1); + + prcm_config_720mhz(); + } + /* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | @@ -136,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify(); - dieid_num_r();
return 0;
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Khasim Syed Mohammed Sent: Saturday, January 09, 2010 10:17 AM To: u-boot@lists.denx.de; beagleboard@googlegroups.com Subject: [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
From e28c5e917f9504b724b6587287ad9e1eb0682b11 Mon Sep 17 00:00:00 2001 From: Syed Mohammed Khasim khasim@ti.com Date: Sat, 9 Jan 2010 09:40:32 +0530 Subject: [PATCH] Add 720Mhz support for Beagle Rev C4
Use the Generic TWL and Clock APIs to get beagle Rev C4 running at 720Mhz
Signed-off-by: Syed Mohammed Khasim khasim@ti.com
board/ti/beagle/beagle.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 0def5a6..7985ee9 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -122,9 +122,27 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
beagle_identify();
twl4030_power_init(); twl4030_led_init();
if (beagle_revision == REVISION_C4) {
/* Select TWL4030 VSEL to support 720Mhz */twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
VAUX2_VSEL_18,TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
DEV_GRP_P1);twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDD1_VSEL,VDD1_VSEL_14,TWL4030_PM_RECEIVER_VDD1_DEV_GRP,
DEV_GRP_P1);prcm_config_720mhz();- }
- /* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1),
&gpio6_base->oe); writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | @@ -136,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify();
- dieid_num_r();
Khasim,
I am not clear about the beagle revisions, but I feel it will be better to check the silicon capability for 720MHz to do the scaling. This patch will need to be updated if there is C5 which also supports 720MHz.
Best regards, Sanjeev
return 0;
1.5.6.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On Mon, Jan 11, 2010 at 10:52 PM, Premi, Sanjeev premi@ti.com wrote:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Khasim Syed Mohammed Sent: Saturday, January 09, 2010 10:17 AM To: u-boot@lists.denx.de; beagleboard@googlegroups.com Subject: [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
From e28c5e917f9504b724b6587287ad9e1eb0682b11 Mon Sep 17 00:00:00 2001 From: Syed Mohammed Khasim khasim@ti.com Date: Sat, 9 Jan 2010 09:40:32 +0530 Subject: [PATCH] Add 720Mhz support for Beagle Rev C4
Use the Generic TWL and Clock APIs to get beagle Rev C4 running at 720Mhz
Signed-off-by: Syed Mohammed Khasim khasim@ti.com
board/ti/beagle/beagle.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 0def5a6..7985ee9 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -122,9 +122,27 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
- beagle_identify();
twl4030_power_init(); twl4030_led_init();
- if (beagle_revision == REVISION_C4) {
- /* Select TWL4030 VSEL to support 720Mhz */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- DEV_GRP_P1);
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDD1_VSEL,
- VDD1_VSEL_14,
TWL4030_PM_RECEIVER_VDD1_DEV_GRP,
- DEV_GRP_P1);
- prcm_config_720mhz();
- }
/* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | @@ -136,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify();
dieid_num_r();
Khasim,
I am not clear about the beagle revisions, but I feel it will be better to check the silicon capability for 720MHz to do the scaling. This patch will need to be updated if there is C5 which also supports 720MHz.
I was looking for documentation / addendum that points to change in silicon revisions - unfortunately I didn't find any.
I agree that we can base this on Silicon Rev instead of board rev. Will change this when I get the documentation for the same.
Thanks for the review.
Regards, Khasim
return 0;
1.5.6.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- You received this message because you are subscribed to the Google Groups "Beagle Board" group. To post to this group, send email to beagleboard@googlegroups.com. To unsubscribe from this group, send email to beagleboard+unsubscribe@googlegroups.com. For more options, visit this group at http://groups.google.com/group/beagleboard?hl=en.
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Syed Mohammed, Khasim Sent: Tuesday, January 12, 2010 11:35 AM To: beagleboard@googlegroups.com Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [beagleboard] RE: TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
On Mon, Jan 11, 2010 at 10:52 PM, Premi, Sanjeev premi@ti.com wrote:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Khasim Syed Mohammed Sent: Saturday, January 09, 2010 10:17 AM To: u-boot@lists.denx.de; beagleboard@googlegroups.com Subject: [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
From e28c5e917f9504b724b6587287ad9e1eb0682b11 Mon Sep 17
00:00:00 2001
From: Syed Mohammed Khasim khasim@ti.com Date: Sat, 9 Jan 2010 09:40:32 +0530 Subject: [PATCH] Add 720Mhz support for Beagle Rev C4
Use the Generic TWL and Clock APIs to get beagle Rev C4 running at 720Mhz
Signed-off-by: Syed Mohammed Khasim khasim@ti.com
board/ti/beagle/beagle.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 0def5a6..7985ee9 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -122,9 +122,27 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
- beagle_identify();
twl4030_power_init(); twl4030_led_init();
- if (beagle_revision == REVISION_C4) {
- /* Select TWL4030 VSEL to support 720Mhz */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- DEV_GRP_P1);
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDD1_VSEL,
- VDD1_VSEL_14,
TWL4030_PM_RECEIVER_VDD1_DEV_GRP,
- DEV_GRP_P1);
- prcm_config_720mhz();
- }
/* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22
| GPIO21 |
@@ -136,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify();
dieid_num_r();
Khasim,
I am not clear about the beagle revisions, but I feel it
will be better to
check the silicon capability for 720MHz to do the scaling.
This patch will
need to be updated if there is C5 which also supports 720MHz.
I was looking for documentation / addendum that points to change in silicon revisions - unfortunately I didn't find any.
I agree that we can base this on Silicon Rev instead of board rev. Will change this when I get the documentation for the same.
Khasim,
The steps are defined in the latest TRM.
Best regards, Sanjeev
Thanks for the review.
Regards, Khasim
return 0;
1.5.6.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- You received this message because you are subscribed to the
Google Groups "Beagle Board" group.
To post to this group, send email to beagleboard@googlegroups.com. To unsubscribe from this group, send email to
beagleboard+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/beagleboard?hl=en.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
On Tue, Jan 12, 2010 at 6:52 PM, Premi, Sanjeev premi@ti.com wrote:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Syed Mohammed, Khasim Sent: Tuesday, January 12, 2010 11:35 AM To: beagleboard@googlegroups.com Cc: u-boot@lists.denx.de Subject: Re: [U-Boot] [beagleboard] RE: TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
On Mon, Jan 11, 2010 at 10:52 PM, Premi, Sanjeev premi@ti.com wrote:
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Khasim Syed Mohammed Sent: Saturday, January 09, 2010 10:17 AM To: u-boot@lists.denx.de; beagleboard@googlegroups.com Subject: [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4
From e28c5e917f9504b724b6587287ad9e1eb0682b11 Mon Sep 17
00:00:00 2001
From: Syed Mohammed Khasim khasim@ti.com Date: Sat, 9 Jan 2010 09:40:32 +0530 Subject: [PATCH] Add 720Mhz support for Beagle Rev C4
Use the Generic TWL and Clock APIs to get beagle Rev C4 running at 720Mhz
Signed-off-by: Syed Mohammed Khasim khasim@ti.com
board/ti/beagle/beagle.c | 20 ++++++++++++++++++-- 1 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 0def5a6..7985ee9 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -122,9 +122,27 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
- beagle_identify();
twl4030_power_init(); twl4030_led_init();
- if (beagle_revision == REVISION_C4) {
- /* Select TWL4030 VSEL to support 720Mhz */
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
- VAUX2_VSEL_18,
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- DEV_GRP_P1);
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDD1_VSEL,
- VDD1_VSEL_14,
TWL4030_PM_RECEIVER_VDD1_DEV_GRP,
- DEV_GRP_P1);
- prcm_config_720mhz();
- }
/* Configure GPIOs to output */ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe); writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22
| GPIO21 |
@@ -136,8 +154,6 @@ int misc_init_r(void) writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 | GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- beagle_identify();
dieid_num_r();
Khasim,
I am not clear about the beagle revisions, but I feel it
will be better to
check the silicon capability for 720MHz to do the scaling.
This patch will
need to be updated if there is C5 which also supports 720MHz.
I was looking for documentation / addendum that points to change in silicon revisions - unfortunately I didn't find any.
I agree that we can base this on Silicon Rev instead of board rev. Will change this when I get the documentation for the same.
Khasim,
The steps are defined in the latest TRM.
Thanks for pointing that out. After checking out with Gerald, I prefer staying with Board revision for this Rev.
I am also waiting for cpu revision detection discussion to stabilize a bit.
Regards, Khasim
Thanks for the review.
Regards, Khasim
return 0;
1.5.6.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
-- You received this message because you are subscribed to the
Google Groups "Beagle Board" group.
To post to this group, send email to beagleboard@googlegroups.com. To unsubscribe from this group, send email to
beagleboard+unsubscribe@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/beagleboard?hl=en.
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
participants (3)
-
Khasim Syed Mohammed -
Premi, Sanjeev -
Syed Mohammed, Khasim