[U-Boot] [PATCH] OMAP3: Update Overo pin mux for new expansion board
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by: Steve Sakoman steve@sakoman.com ---
Patch is against recent mainline commit 'b3dd629e78870ba2dc9f8032978721c0fa02a856' "Prepare 2009.03-rc2"
--- board/omap3/overo/overo.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
Index: u-boot-main/board/omap3/overo/overo.h =================================================================== --- u-boot-main.orig/board/omap3/overo/overo.h +++ u-boot-main/board/omap3/overo/overo.h @@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\ + /* - PEN_DOWN*/\ MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\ /*Audio Interface */\ MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ @@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\ MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT4*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\ /* - W2W_NRESET*/\ @@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT7*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT6*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT5*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\
On 20:00 Mon 16 Mar , Dirk Behme wrote:
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by: Steve Sakoman steve@sakoman.com
Patch is against recent mainline commit 'b3dd629e78870ba2dc9f8032978721c0fa02a856' "Prepare 2009.03-rc2"
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
BTW we do need a better api to managen pio setting on the omap3 may be someting as the AT91 api
Best Regards, J.
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 20:00 Mon 16 Mar , Dirk Behme wrote:
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by: Steve Sakoman steve@sakoman.com
Patch is against recent mainline commit 'b3dd629e78870ba2dc9f8032978721c0fa02a856' "Prepare 2009.03-rc2"
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Dirk
On 15:29 Mon 30 Mar , Dirk Behme wrote:
Jean-Christophe PLAGNIOL-VILLARD wrote:
On 20:00 Mon 16 Mar , Dirk Behme wrote:
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by: Steve Sakoman steve@sakoman.com
Patch is against recent mainline commit 'b3dd629e78870ba2dc9f8032978721c0fa02a856' "Prepare 2009.03-rc2"
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info
Best Regards, J.
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message 20090330150504.GD21302@game.jcrosoft.org you wrote:
A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and switches. This patch changes the pinmux configuration for those pins. They were previously set up for unused MMC3_DAT4-7.
Signed-off-by: Steve Sakoman steve@sakoman.com
Patch is against recent mainline commit 'b3dd629e78870ba2dc9f8032978721c0fa02a856' "Prepare 2009.03-rc2"
sorry NACK
Please send it correctly because git am will take the information from the email Hearder and I do not want to fix it manually
Hmm, I sent this patch the same way I did with the other patches. And I can't see anything obviously wrong. Please give some details what you think might be wrong with this patch (header?).
Based on the patch info your not the Author of the patch so it must be the same in the Mail Header info
Or Dirk should have added his own signed-off-by: line, too.
Best regards,
Wolfgang Denk
participants (3)
-
Dirk Behme -
Jean-Christophe PLAGNIOL-VILLARD -
Wolfgang Denk