Update the M2 socket gpio hogs such that they are not active on boot by flagging them as GPIO_ACTIVE_HIGH so that 'output-high' drives high.

Signed-off-by: Tim Harvey tharvey@gateworks.com --- arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi index 920246d577ed..caee3f66954b 100644 --- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi @@ -86,21 +86,21 @@

m2_dis2_hog { gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; + gpios = <0 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_gdis#"; };

m2rst_hog { gpio-hog; - gpios = <6 GPIO_ACTIVE_LOW>; + gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_rst#"; };

m2_off_hog { gpio-hog; - gpios = <14 GPIO_ACTIVE_LOW>; + gpios = <14 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_off#"; }; @@ -111,7 +111,7 @@

m2_dis1_hog { gpio-hog; - gpios = <18 GPIO_ACTIVE_LOW>; + gpios = <18 GPIO_ACTIVE_HIGH>; output-high; line-name = "m2_wdis#"; };