[U-Boot] [PATCH v1 1/2] colibri_imx6/imx7/imx8x: use distroboot by default
From: Igor Opaniuk igor.opaniuk@toradex.com
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
include/configs/colibri-imx8x.h | 1 + include/configs/colibri_imx6.h | 4 ++-- include/configs/colibri_imx7.h | 5 +++-- 3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 2469066849..2b093efb2c 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -82,6 +82,7 @@ CONFIG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ MEM_LAYOUT_ENV_SETTINGS \ + "boot_file=Image\0" \ "console=ttyLP3 earlycon\0" \ "fdt_addr=0x83000000\0" \ "fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 147f801353..a719a4eadc 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -92,6 +92,7 @@
#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(DHCP, dhcp, na) @@ -168,8 +169,7 @@ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 49cdd61038..760e36fac9 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -109,7 +109,8 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x81000000\0" \ - "ramdisk_addr_r=0x82100000\0" + "ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x82500000\0"
#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) #define SD_BOOTDEV 0 @@ -160,7 +161,7 @@ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) -#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \ +#define CONFIG_BOOTCOMMAND \ "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;" #define MODULE_EXTRA_ENV_SETTINGS \ "variant=-emmc\0" \
From: Igor Opaniuk igor.opaniuk@toradex.com
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com ---
include/configs/apalis_imx6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 974571df43..736ebb60ce 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -102,6 +102,7 @@
#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(USB, usb, 0) \ @@ -184,8 +185,7 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \ - "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ + "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \
On Fri, Aug 23, 2019 at 8:01 PM Igor Opaniuk igor.opaniuk@gmail.com wrote:
From: Igor Opaniuk igor.opaniuk@toradex.com
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com
In general: Reviewed-by: Oleksandr Suvorov oleksandr.suvorov@toradex.com
But if you will push a new version, please fix the typo in comment msg: s/defauult/default/
include/configs/apalis_imx6.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 974571df43..736ebb60ce 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -102,6 +102,7 @@
#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ func(USB, usb, 0) \@@ -184,8 +185,7 @@ #endif #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \
"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \"setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \-- 2.17.1
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
On Fri, Aug 23, 2019 at 8:01 PM Igor Opaniuk igor.opaniuk@gmail.com wrote:
From: Igor Opaniuk igor.opaniuk@toradex.com
Use distro_bootcmd as defauult bootcmd instead of legacy wrappers.
Signed-off-by: Igor Opaniuk igor.opaniuk@toradex.com
In general: Reviewed-by: Oleksandr Suvorov oleksandr.suvorov@toradex.com
But if you will push a new version, please fix the typo in comment msg: s/defauult/default/
include/configs/colibri-imx8x.h | 1 + include/configs/colibri_imx6.h | 4 ++-- include/configs/colibri_imx7.h | 5 +++-- 3 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 2469066849..2b093efb2c 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -82,6 +82,7 @@ CONFIG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \ "console=ttyLP3 earlycon\0" \ "fdt_addr=0x83000000\0" \ "fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 147f801353..a719a4eadc 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -92,6 +92,7 @@
#ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(USB, usb, 0) \ func(DHCP, dhcp, na)@@ -168,8 +169,7 @@ #define FDT_FILE "imx6dl-colibri-eval-v3.dtb" #define CONFIG_EXTRA_ENV_SETTINGS \ BOOTENV \
"bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \"setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \
"bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ "boot_file=zImage\0" \diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index 49cdd61038..760e36fac9 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -109,7 +109,8 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x81000000\0" \
"ramdisk_addr_r=0x82100000\0"
"ramdisk_addr_r=0x82100000\0" \"scriptaddr=0x82500000\0"#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) #define SD_BOOTDEV 0 @@ -160,7 +161,7 @@ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD #elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) -#define CONFIG_BOOTCOMMAND "run emmcboot ; echo ; echo emmcboot failed ; " \ +#define CONFIG_BOOTCOMMAND \ "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;" #define MODULE_EXTRA_ENV_SETTINGS \ "variant=-emmc\0" \ -- 2.17.1
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
participants (2)
-
Igor Opaniuk -
Oleksandr Suvorov