Board gets reset when performing burst read/write operations. On the other hand, no such behaviour is observed on small size operations.

In Linux, readl_poll_timeout API already adds delay of 1us which is further skipped in U-boot. Hence, use new "readl_poll_sleep_timeout" API which adds delay alongwith timeout functionality.

Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com --- v3: -Reword commit message and use new API instead of adding delay. -Depends on: a) https://patchwork.ozlabs.org/project/uboot/patch/20200425110354.12381-2-jaga... b) https://patchwork.ozlabs.org/project/uboot/patch/20200425110354.12381-3-jaga...

v2: -Add comments above udelay(1) change.

drivers/spi/nxp_fspi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/nxp_fspi.c b/drivers/spi/nxp_fspi.c index 0e6c7be..22a5c0e 100644 --- a/drivers/spi/nxp_fspi.c +++ b/drivers/spi/nxp_fspi.c @@ -421,7 +421,7 @@ static bool nxp_fspi_supports_op(struct spi_slave *slave, return true; }

-/* Instead of busy looping invoke readl_poll_timeout functionality. */ +/* Instead of busy looping invoke readl_poll_sleep_timeout functionality. */ static int fspi_readl_poll_tout(struct nxp_fspi *f, void __iomem *base, u32 mask, u32 delay_us, u32 timeout_us, bool c) @@ -432,11 +432,11 @@ static int fspi_readl_poll_tout(struct nxp_fspi *f, void __iomem *base, mask = (u32)cpu_to_be32(mask);

if (c) - return readl_poll_timeout(base, reg, (reg & mask), - timeout_us); + return readl_poll_sleep_timeout(base, reg, (reg & mask), + delay_us, timeout_us); else - return readl_poll_timeout(base, reg, !(reg & mask), - timeout_us); + return readl_poll_sleep_timeout(base, reg, !(reg & mask), + delay_us, timeout_us); }

/*