Hi all,

i have a strenght problem ... uboot is comming up but when i enter any command its freezing ....

anyone here how have an idea why ? ..

@ Wolfgang Denk -- i figured out that in the SC520 implementation (i386 - board.c ) the relocation to Dram and copy of the commands is not implemented -- is that correct ? im to new to Uboot to be sure about that .. so please can you look at board.c and give me a feedback if im right ..then i will try to port that part maybe thats the reason why im freezing ?

or is has someone still done this part in the past ?

thanks Wolfgang Kanovsky

---------------------------------------------------------------

U-Boot 1.0.2 (Mar 19 2004 - 09:46:37)

U-Boot code: 08FC0000 -> 08FDA389 data: 00400000 -> 00400AF3 BSS: 00400AF4 -> 0040AF5F stack: 0040AF60 -> 00412F5F DRAM Configuration: Bank #0: 00000000 64 MB Bank 0: Micron / Intel 28F640J3A Flash: 8 MB *** Warning - bad CRC, using default environment

set_irq(): map INTA to IRQ9 00 11 8086 1209 0200 09 In: serial Out: serial Err: serial Net: i82559#0 ***SC520 hopf BOARD last stage init done*** ### main_loop entered: bootdelay=5

### main_loop: bootcmd="<UNDEFINED>" boot > H

---- frozen !!!!!!!!!!!!!!!!!!!!!!!!!

_______________________________________________________________________

Realtime Distributed Computing Systems - Ruprecht & Partner OEG

Hopf Industriefunkuhren SUN Microsystems iForce Partner Master Reseller A*CZ*SK*HR*SLO Oracle Partner

Embelgasse 66/10-11 A - 1050 Wien

Tel: +43 1 5455077-0 Fax: +43 1 5455077-11 mailto:office@rdcs.at Internet: http://www.rdcs.at/ _____________________________________________________________________