From: Johan Jonker jbx6244@gmail.com

Sync rk3066/rk3188 DT files from Linux. This is the state as of v5.18 in Linux + nfc node for MK808 rk3066a. CRU nodes now have a clock property. To prefend dtoc errors a fixed clock must also be included for tpl/spl in the rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker jbx6244@gmail.com --- arch/arm/dts/rk3066a-mk808.dts | 18 ++++++++++++++++++ arch/arm/dts/rk3066a.dtsi | 3 ++- arch/arm/dts/rk3188-radxarock.dts | 3 +-- arch/arm/dts/rk3188.dtsi | 24 +++++++++++++++--------- arch/arm/dts/rk3xxx-u-boot.dtsi | 4 ++++ 5 files changed, 40 insertions(+), 12 deletions(-)

diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts index 667d57a4..cfa318a5 100644 --- a/arch/arm/dts/rk3066a-mk808.dts +++ b/arch/arm/dts/rk3066a-mk808.dts @@ -160,6 +160,24 @@ status = "okay"; };

+&nfc { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nand@0 { + reg = <0>; + label = "rk-nand"; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-step-size = <1024>; + nand-ecc-strength = <40>; + nand-is-boot-medium; + rockchip,boot-blks = <8>; + rockchip,boot-ecc-strength = <24>; + }; +}; + &pinctrl { usb-host { host_drv: host-drv { diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi index c25b9695..de9915d9 100644 --- a/arch/arm/dts/rk3066a.dtsi +++ b/arch/arm/dts/rk3066a.dtsi @@ -202,8 +202,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3066a-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts index e7138a4a..a9ed3cd2 100644 --- a/arch/arm/dts/rk3188-radxarock.dts +++ b/arch/arm/dts/rk3188-radxarock.dts @@ -6,7 +6,6 @@ /dts-v1/; #include <dt-bindings/input/input.h> #include "rk3188.dtsi" -#include "rk3188-radxarock-u-boot.dtsi"

/ { model = "Radxa Rock"; @@ -25,7 +24,7 @@ compatible = "gpio-keys"; autorepeat;

- power { + key-power { gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi index 9a80f83a..cdd4a0bd 100644 --- a/arch/arm/dts/rk3188.dtsi +++ b/arch/arm/dts/rk3188.dtsi @@ -54,7 +54,7 @@ }; };

- cpu0_opp_table: opp_table0 { + cpu0_opp_table: opp-table-0 { compatible = "operating-points-v2"; opp-shared;

@@ -195,8 +195,9 @@ cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; - #clock-cells = <1>; #reset-cells = <1>; }; @@ -223,7 +224,7 @@ #size-cells = <1>; ranges;

- gpio0: gpio0@2000a000 { + gpio0: gpio@2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -236,7 +237,7 @@ #interrupt-cells = <2>; };

- gpio1: gpio1@2003c000 { + gpio1: gpio@2003c000 { compatible = "rockchip,gpio-bank"; reg = <0x2003c000 0x100>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -249,7 +250,7 @@ #interrupt-cells = <2>; };

- gpio2: gpio2@2003e000 { + gpio2: gpio@2003e000 { compatible = "rockchip,gpio-bank"; reg = <0x2003e000 0x100>; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; @@ -262,7 +263,7 @@ #interrupt-cells = <2>; };

- gpio3: gpio3@20080000 { + gpio3: gpio@20080000 { compatible = "rockchip,gpio-bank"; reg = <0x20080000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; @@ -275,15 +276,15 @@ #interrupt-cells = <2>; };

- pcfg_pull_up: pcfg_pull_up { + pcfg_pull_up: pcfg-pull-up { bias-pull-up; };

- pcfg_pull_down: pcfg_pull_down { + pcfg_pull_down: pcfg-pull-down { bias-pull-down; };

- pcfg_pull_none: pcfg_pull_none { + pcfg_pull_none: pcfg-pull-none { bias-disable; };

@@ -641,6 +642,11 @@ &grf { compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";

+ io_domains: io-domains { + compatible = "rockchip,rk3188-io-voltage-domain"; + status = "disabled"; + }; + usbphy: usbphy { compatible = "rockchip,rk3188-usb-phy"; #address-cells = <1>; diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi index e67432fb..c77d1fae 100644 --- a/arch/arm/dts/rk3xxx-u-boot.dtsi +++ b/arch/arm/dts/rk3xxx-u-boot.dtsi @@ -33,3 +33,7 @@ &uart2 { clock-frequency = <24000000>; }; + +&xin24m { + u-boot,dm-pre-reloc; +};