...

my u-boot-1.1.1 hangs while booting, as follow is the message got from the serial:

General rule: in case of problems try using current code. U-Boot 1.1.1 is obsolete.

yes,I know..but under some reasons we still use this version.and it works well.:)

Second: it would have been really nice if you had mentioned whioch board / processor this is.

it's s3c2410.

...

after some tests by tracing the sequences of the funtions, I found that the u-boot hangs while comming to this funtion: device_register (&dev),which is a subfuntion of drv_system_init (); -------in u-boot-1.1.1/common/devices.c

THis code has been running fine for ages. My guess is memory problems on your hardware.

----------maybe,but I have replaced the two sdram for a test,the problem still exists.

...

I am so dizzy about what's going on there. the u-boot has been using for months....so I don't think it's the problem of the u-boot.maybe it's about the problem of the hardware, to cause the u-boot hangs???

Did you try it on another board?

...

--=====003_Dragon177227050737_===== Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: 7bit

STOP posting HTML here!!!

--------sorry,it's my fault.I don't get used to this email editor.:(

regards

tony