The internal DMAC asserts DMA transfer end bit too early on older version of the TMIO IPs which use bit 17 for DTRAEND. Add 1uS delay after the completion of DMA transfer and before invalidating the cache to let the DMAC fully complete the transfer. Otherwise, it could happen that the last few bytes of a transferred data are not available.

A test case to trigger this behavior is the following command, ran on the U-Boot command line, with Sandisk 16 GiB UHS-I card inserted into SDHI slot 0 and with first partition being of type FAT: => while true ; do mmc rescan ; fstype mmc 0:1 ; done

Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- drivers/mmc/tmio-common.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c index 0b6a284f2e..2421915a07 100644 --- a/drivers/mmc/tmio-common.c +++ b/drivers/mmc/tmio-common.c @@ -367,6 +367,9 @@ static int tmio_sd_dma_xfer(struct udevice *dev, struct mmc_data *data)

ret = tmio_sd_dma_wait_for_irq(dev, poll_flag, data->blocks);

+ if (poll_flag == TMIO_SD_DMA_INFO1_END_RD) + udelay(1); + __dma_unmap_single(dma_addr, len, dir);

return ret;