Hello,

on my custom board I have 2 PCMCIA slots. After pcmcia init I get:

equantum> pinit on

Fixed Disk Card IDE interface [silicon] [single] [sleep] [standby] [idle] [low power]

but when I do "ide reset" I get:

Device 2: ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6 ide_inb (dev= 2, port= 0x1f2) : @ 0x200001f2 -> 0xd1 ide_outb (dev= 2, port= 0x1f7, val= 0xec) : @ 0x200001f7 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x58 in input data base for read is 200001f0 Model: Industrial CF Card Firm: ra03.00f Ser#: CIAF01000045 1 Type: Removable Hard Disk Capacity: 125.0 MB = 0.1 GB (256000 x 512) ide_read dev 2 start 0, blocks 1 buffer at A2EFF918 ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd0 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x51 ide_outb (dev= 2, port= 0x1f7, val= 0xe5) : @ 0x200001f7 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x50 ide_inb (dev= 2, port= 0x1f2) : @ 0x200001f2 -> 0x00 Powersaving 00 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x50 ide_outb (dev= 2, port= 0x1f2, val= 0x01) : @ 0x200001f2 ide_outb (dev= 2, port= 0x1f3, val= 0x00) : @ 0x200001f3 ide_outb (dev= 2, port= 0x1f4, val= 0x00) : @ 0x200001f4 ide_outb (dev= 2, port= 0x1f5, val= 0x00) : @ 0x200001f5 ide_outb (dev= 2, port= 0x1f6, val= 0xe0) : @ 0x200001f6 ide_outb (dev= 2, port= 0x1f7, val= 0x20) : @ 0x200001f7 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0xd1 ide_inb (dev= 2, port= 0x1f7) : @ 0x200001f7 -> 0x51 Error (no IRQ) dev 2 blk 0: status 0x51

So, the CF is recognized but when the system tries to read first sectors something goes wrong!

Any suggestions?

Rodolfo