Hi,

On 04-01-15 20:15, Michal Suchanek wrote:

Current value is 1.25V. Most boards use 1.3V which is expected more stable. Can be overriden later by kernel setting anyway.

What makes you say that most boards use 1.3 V ? All the fex files in sunxi-boards/sys_config/a10s/ either do not specify DCDC4, or use 1200, which is lower then what we set already.

Also please Cc patches for upstream u-boot to the upstream u-boot list.

Regards,

Hans

Signed-off-by: Michal Suchanek hramrach@gmail.com

board/sunxi/board.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 4c1c69a..dda2d43 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -162,7 +162,7 @@ void sunxi_board_init(void) power_failed = axp152_init(); power_failed |= axp152_set_dcdc2(1400); power_failed |= axp152_set_dcdc3(1500);

• power_failed |= axp152_set_dcdc4(1250);

• power_failed |= axp152_set_dcdc4(1300); power_failed |= axp152_set_ldo2(3000); #endif #ifdef CONFIG_AXP209_POWER