[U-Boot] [PATCH] Juno: don't print PCI debug information by default
On a Juno r1 the PCI controller init routine outputs the rather boring ATR entry information. Do this only with DEBUG defined to avoid cluttering the user's terminal.
Signed-off-by: Andre Przywara andre.przywara@arm.com --- board/armltd/vexpress64/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/armltd/vexpress64/pcie.c b/board/armltd/vexpress64/pcie.c index 7b999e8..eb23dd5 100644 --- a/board/armltd/vexpress64/pcie.c +++ b/board/armltd/vexpress64/pcie.c @@ -87,7 +87,7 @@ void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr, writel((u32)(trsl_addr >> 32), base + XR3PCI_ATR_TRSL_ADDR_HIGH); writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
- printf("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n", + debug("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n", src_addr, (trsl_param & 0x400000) ? "<-" : "->", trsl_addr, ((u64)1) << window_size, trsl_param); }
On 13 November 2015 at 11:25, Andre Przywara andre.przywara@arm.com wrote:
On a Juno r1 the PCI controller init routine outputs the rather boring ATR entry information. Do this only with DEBUG defined to avoid cluttering the user's terminal.
Good idea.
Signed-off-by: Andre Przywara andre.przywara@arm.com
Acked-by: Ryan Harkin ryan.harkin@linaro.org
board/armltd/vexpress64/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/armltd/vexpress64/pcie.c b/board/armltd/vexpress64/pcie.c index 7b999e8..eb23dd5 100644 --- a/board/armltd/vexpress64/pcie.c +++ b/board/armltd/vexpress64/pcie.c @@ -87,7 +87,7 @@ void xr3pci_set_atr_entry(unsigned long base, unsigned long src_addr, writel((u32)(trsl_addr >> 32), base + XR3PCI_ATR_TRSL_ADDR_HIGH); writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
printf("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n",
debug("ATR entry: 0x%010lx %s 0x%010lx [0x%010llx] (param: 0x%06x)\n", src_addr, (trsl_param & 0x400000) ? "<-" : "->", trsl_addr, ((u64)1) << window_size, trsl_param);}
2.5.1
On Fri, Nov 13, 2015 at 11:25:46AM +0000, Andre Przywara wrote:
On a Juno r1 the PCI controller init routine outputs the rather boring ATR entry information. Do this only with DEBUG defined to avoid cluttering the user's terminal.
Signed-off-by: Andre Przywara andre.przywara@arm.com Acked-by: Ryan Harkin ryan.harkin@linaro.org
Applied to u-boot/master, thanks!
participants (3)
-
Andre Przywara -
Ryan Harkin -
Tom Rini