[U-Boot-Users] Microblaze update ml401, xupv2p
Hi Wolfgang and others,
here is small update for ml401, xupv2p boards.
For Wolfgang. It doesn't matter when you pull these changes to mainline.
This patch only fix imcompatibility between U-BOOT config files and U-BOOT bsp generator.
I tested Microblaze repo and I have no problem there. Microblaze is ready for next stable release.
Regards, Michal Simek
From: Michal Simek monstr@monstr.eu
Signed-off-by: Michal Simek monstr@monstr.eu --- include/configs/ml401.h | 21 +++++++++++++++++++-- include/configs/xupv2p.h | 21 +++++++++++++++++++-- 2 files changed, 38 insertions(+), 4 deletions(-)
diff --git a/include/configs/ml401.h b/include/configs/ml401.h index 360e2e1..7e0df87 100644 --- a/include/configs/ml401.h +++ b/include/configs/ml401.h @@ -56,9 +56,11 @@ /* ethernet */ #ifdef XILINX_EMAC_BASEADDR #define CONFIG_XILINX_EMAC 1 +#define CFG_ENET #else #ifdef XILINX_EMACLITE_BASEADDR #define CONFIG_XILINX_EMACLITE 1 +#define CFG_ENET #endif #endif #undef ET_DEBUG @@ -70,18 +72,28 @@ #endif
/* interrupt controller */ +#ifdef XILINX_INTC_BASEADDR #define CFG_INTC_0 1 #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS +#endif
/* timer */ +#ifdef XILINX_TIMER_BASEADDR +#if (XILINX_TIMER_IRQ != -1) #define CFG_TIMER_0 1 #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#endif +#else +#ifdef XILINX_CLOCK_FREQ #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ - +#else +#error BAD CLOCK FREQ +#endif +#endif /* FSL */ /* #define CFG_FSL_2 */ /* #define FSL_INTR_2 1 */ @@ -195,7 +207,12 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL -#define CONFIG_CMD_PING + +#ifndef CFG_ENET + #undef CONFIG_CMD_NET +#else + #define CONFIG_CMD_PING +#endif
#if defined(CONFIG_SYSTEMACE) #define CONFIG_CMD_EXT2 diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index 30fb303..c738567 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -63,9 +63,11 @@ /* ethernet */ #ifdef XILINX_EMAC_BASEADDR #define CONFIG_XILINX_EMAC 1 +#define CFG_ENET #else #ifdef XILINX_EMACLITE_BASEADDR #define CONFIG_XILINX_EMACLITE 1 +#define CFG_ENET #endif #endif #undef ET_DEBUG @@ -77,18 +79,28 @@ #endif
/* interrupt controller */ +#ifdef XILINX_INTC_BASEADDR #define CFG_INTC_0 1 #define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR #define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS +#endif
/* timer */ +#ifdef XILINX_TIMER_BASEADDR +#if (XILINX_TIMER_IRQ != -1) #define CFG_TIMER_0 1 #define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR #define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ #define FREQUENCE XILINX_CLOCK_FREQ #define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 ) +#endif +#else +#ifdef XILINX_CLOCK_FREQ #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ - +#else +#error BAD CLOCK FREQ +#endif +#endif /* * memory layout - Example * TEXT_BASE = 0x3600_0000; @@ -162,7 +174,12 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING + +#ifndef CFG_ENET + #undef CONFIG_CMD_NET +#else + #define CONFIG_CMD_PING +#endif
#ifdef XILINX_SYSACE_BASEADDR #define CONFIG_CMD_EXT2
In message 52a29b63f10629de66c4fbe9b8b1578d5e0fee0b.1209908172.git.monstr@monstr.eu you wrote:
From: Michal Simek monstr@monstr.eu
Signed-off-by: Michal Simek monstr@monstr.eu
include/configs/ml401.h | 21 +++++++++++++++++++-- include/configs/xupv2p.h | 21 +++++++++++++++++++-- 2 files changed, 38 insertions(+), 4 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
participants (2)
-
monstr＠seznam.cz -
Wolfgang Denk