On 22/07/2016 14:12, Breno Lima wrote:

It's not necessary to implement the is_mx6q function, there is a macro in sys_proto.h already implemented.

Signed-off-by: Breno Lima breno.lima@nxp.com

board/congatec/cgtqmx6eval/cgtqmx6eval.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c index 225de7c..3fbd3d2 100644 --- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c +++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c @@ -678,14 +678,6 @@ int overwrite_console(void) return 1; }

-static bool is_mx6q(void) -{

• if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))

• return true;
  

• else

• return false;
  

-}

int board_early_init_f(void) { setup_iomux_uart(); @@ -703,7 +695,7 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

• if (is_mx6q())

• if (is_mx6dq()) setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1); else setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);

@@ -760,7 +752,7 @@ int misc_init_r(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

• if (is_mx6q())

• if (is_mx6dq()) setenv("board_rev", "MX6Q"); else setenv("board_rev", "MX6DL");

@@ -1053,7 +1045,7 @@ static void spl_dram_init(int width) return; }

• if (is_mx6q()) {

• if (is_mx6dq()) { mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs); mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g); } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic