[U-Boot] [PATCH] env: dataflash: fix env_init issue

As the SPI controller is not initialized before env_init(), it causes reading env in dataflash failed. So, although saveenv() successfully, it shows warning information when reboot the system as following:
*** Warning - bad CRC, using default environment
Let the env_relocate() to check env CRC and import it.
Signed-off-by: Bo Shen voice.shen@atmel.com
--- common/env_dataflash.c | 50 +++++++++++++++++------------------------------- 1 file changed, 18 insertions(+), 32 deletions(-)
diff --git a/common/env_dataflash.c b/common/env_dataflash.c index 5f21d5c..b53b87e 100644 --- a/common/env_dataflash.c +++ b/common/env_dataflash.c @@ -29,11 +29,25 @@ uchar env_get_char_spec(int index)
void env_relocate_spec(void) { + ulong crc, new = 0; + unsigned off; char buf[CONFIG_ENV_SIZE];
+ /* Read old CRC */ + read_dataflash(CONFIG_ENV_ADDR + offsetof(env_t, crc), + sizeof(ulong), (char *)&crc); + + /* Read whole environment */ read_dataflash(CONFIG_ENV_ADDR, CONFIG_ENV_SIZE, buf);
- env_import(buf, 1); + /* Calculate the CRC */ + off = offsetof(env_t, data); + new = crc32(new, (unsigned char *)(buf + off), ENV_SIZE); + + if (crc == new) + env_import(buf, 1); + else + set_default_env("!bad CRC"); }
#ifdef CONFIG_ENV_OFFSET_REDUND @@ -67,37 +81,9 @@ int saveenv(void) */ int env_init(void) { - ulong crc, len = ENV_SIZE, new = 0; - unsigned off; - uchar buf[64]; - - if (gd->env_valid) - return 0; - - AT91F_DataflashInit(); /* prepare for DATAFLASH read/write */ - - /* read old CRC */ - read_dataflash(CONFIG_ENV_ADDR + offsetof(env_t, crc), - sizeof(ulong), (char *)&crc); - - off = offsetof(env_t, data); - while (len > 0) { - int n = (len > sizeof(buf)) ? sizeof(buf) : len; - - read_dataflash(CONFIG_ENV_ADDR + off, n, (char *)buf); - - new = crc32(new, buf, n); - len -= n; - off += n; - } - - if (crc == new) { - gd->env_addr = offsetof(env_t, data); - gd->env_valid = 1; - } else { - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 0; - } + /* use default */ + gd->env_addr = (ulong)&default_environment[0]; + gd->env_valid = 1;
return 0; }

On Tue, Oct 08, 2013 at 04:30:21PM +0800, Bo Shen wrote:
As the SPI controller is not initialized before env_init(), it causes reading env in dataflash failed. So, although saveenv() successfully, it shows warning information when reboot the system as following:
*** Warning - bad CRC, using default environment
Let the env_relocate() to check env CRC and import it.
Signed-off-by: Bo Shen voice.shen@atmel.com
Applied to u-boot/master, thanks!
participants (2)
-
Bo Shen
-
Tom Rini