On 21/08/2024 01:00, Caleb Connolly wrote:

We already have some documentation describing how to enable debug UART for Qualcomm SoCs. However the UART address varies per-soc... Add some config fragments to enable debug UART for few well supported SoCs.

These can be used like:

$ make qcom_defconfig debug-sdm845.config

Signed-off-by: Caleb Connolly caleb.connolly@linaro.org

board/qualcomm/debug-sdm845.config | 5 +++++ board/qualcomm/debug-sm6115.config | 5 +++++ board/qualcomm/debug-sm8250.config | 5 +++++ 3 files changed, 15 insertions(+) create mode 100644 board/qualcomm/debug-sdm845.config create mode 100644 board/qualcomm/debug-sm6115.config create mode 100644 board/qualcomm/debug-sm8250.config

diff --git a/board/qualcomm/debug-sdm845.config b/board/qualcomm/debug-sdm845.config new file mode 100644 index 000000000000..31ad6d02a3a7 --- /dev/null +++ b/board/qualcomm/debug-sdm845.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xa84000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=7372800 diff --git a/board/qualcomm/debug-sm6115.config b/board/qualcomm/debug-sm6115.config new file mode 100644 index 000000000000..131c6e230de8 --- /dev/null +++ b/board/qualcomm/debug-sm6115.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0x4a90000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600 diff --git a/board/qualcomm/debug-sm8250.config b/board/qualcomm/debug-sm8250.config new file mode 100644 index 000000000000..4d3cc4cc97f4 --- /dev/null +++ b/board/qualcomm/debug-sm8250.config @@ -0,0 +1,5 @@ +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_BASE=0xa90000 +CONFIG_DEBUG_UART_MSM_GENI=y +CONFIG_DEBUG_UART_CLOCK=14745600

Reviewed-by: Neil Armstrong neil.armstrong@linaro.org