Peter,

On 9/15/21 11:32 AM, Peter Robinson wrote:

On Wed, Sep 15, 2021 at 4:40 PM Matthias Brugger mbrugger@suse.com wrote:

...

Hi Tom,

I know, quite a bit late but here come the updates for RPi for v2021.10. Actually most of the patches are fixes.

Ivan's patch fixes a kernel warning when booting RPi2, as the firmware already provides a frambebuffer node.

Marek's patch fixes random crashes on 32 bit RPi4 with newer firmware.

My SMBIOS patchesfixes an issue that show up with e4f8e543f1 ("smbios: Drop the unused Kconfig options"). Basically the SMBIOS table broke and wasn't readable anymore.

I think we can argue if the last one is a real fix. In case you just want to take the first two so late in the cycle, let me know and I can provide you with a separate pull request.

It would also be good to get these[1] , although it doesn't seem like they were also posted to the list. It fixes a regression with U-Boot and recent RPi firmwares [2] so will likely come up sooner rather than later post release.

Peter

I did send these to the u-boot list but received an "awaiting moderator approval" response.

Is there a different list i should have submitted this to, just for future reference?

[1] https://patchwork.ozlabs.org/project/uboot/list/?series=262375 [2] https://github.com/raspberrypi/firmware/issues/1619

...

Regards, Matthias

---

The following changes since commit bb92678ced0b1594b93ab2f10b2c17750c789c96:

Prepare v2021.10-rc4 (2021-09-14 18:58:10 -0400)

are available in the Git repository at:

https://source.denx.de/u-boot/custodians/u-boot-raspberrypi.git/ rpi-next

for you to fetch changes up to acc6987e59137485dbac0ee4a07cc349210954f3:

rpi: Conditionally add simple-framebuffer node (2021-09-15 13:34:06 +0200)

---

Ivan T. Ivanov (1):

    rpi: Conditionally add simple-framebuffer node

Marek Szyprowski (1):

    ARM: bcm283x: change the virtual address of the XHCI PCI device base

Matthias Brugger (2):

    arm: dts: bcm283x: Add minimal smbios information

    configs: rpi: Enable SMBIOS sysinfo driver

arch/arm/dts/bcm283x-u-boot.dtsi | 19 +++++++++++++++++++

arch/arm/mach-bcm283x/init.c | 4 ++--

board/raspberrypi/rpi/rpi.c | 11 +++++------

configs/rpi_0_w_defconfig | 2 ++

configs/rpi_2_defconfig | 2 ++

configs/rpi_3_32b_defconfig | 2 ++

configs/rpi_3_b_plus_defconfig | 2 ++

configs/rpi_3_defconfig | 2 ++

configs/rpi_4_32b_defconfig | 2 ++

configs/rpi_4_defconfig | 2 ++

configs/rpi_arm64_defconfig | 2 ++

configs/rpi_defconfig | 2 ++

12 files changed, 44 insertions(+), 8 deletions(-)