On 06/07/2018 16:10, Holger Dengler wrote:

Signing parts of a u-boot imximage for image verification in High Assurance Boot (HAB) in a post-build process, requires some information from the imximage header. Currently, this information is only provided during the image build, which makes the transfer of this information to the post-build process harder than necessary.

The i.MX HAB information (start and length) can be calculated either by using information from the image-configuration file, or from the information in the flash header of the imximage. The advantage of using information from flash header is, that they are not only available during image creation, but also available if existing images are processed.

Example: $ tools/mkimage -l u-boot.imx Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 483328 Bytes = 472.00 KiB = 0.46 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00071c00 DCD Blocks: 0x00910000 0x0000002c 0x00000208

Signed-off-by: Holger Dengler dengler@linutronix.de

tools/imximage.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/tools/imximage.c b/tools/imximage.c index 5f63bf8759..d7c0b6e883 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -506,8 +506,7 @@ static void print_hdr_v2(struct imx_header *imx_hdr) genimg_print_size(hdr_v2->boot_data.size); printf("Load Address: %08x\n", (uint32_t)fhdr_v2->boot_data_ptr); printf("Entry Point: %08x\n", (uint32_t)fhdr_v2->entry);

• if (fhdr_v2->csf && (imximage_ivt_offset != UNDEFINED) &&
  

•     (imximage_csf_size != UNDEFINED)) {
  

• if (fhdr_v2->csf) {
  uint16_t dcdlen;
  int offs;
  
  

@@ -515,10 +514,16 @@ static void print_hdr_v2(struct imx_header *imx_hdr) offs = (char *)&hdr_v2->data.dcd_table - (char *)hdr_v2;

• 	/*
  

• 	 * The HAB block is the first part of the image, from
  

• 	 * start of IVT header (fhdr_v2->self) to the start of
  

• 	 * the CSF block (fhdr_v2->csf). So HAB size is
  

• 	 * calculated as:
  

• 	 * HAB_size = fhdr_v2->csf - fhdr_v2->self
  

• 	 */
  printf("HAB Blocks:   0x%08x 0x%08x 0x%08x\n",
         (uint32_t)fhdr_v2->self, 0,
  

• 	       hdr_v2->boot_data.size - imximage_ivt_offset -
  

• 	       imximage_csf_size);
  

• 	       (uint32_t)(fhdr_v2->csf - fhdr_v2->self));
  printf("DCD Blocks:   0x00910000 0x%08x 0x%08x\n",
         offs, be16_to_cpu(dcdlen));
  

  }

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic