Hi,

********************************************************************************** This is a patch for MPC8349E ADS board readme in README.mpc83xxads. This patch corrects u-boot base address described in the README.mpc83xxads to be the same as text base set in the source code.

Log Entry:

* Patched by Neil Chu, Oct 2005 Correct the flash base address in README.mpc83xx so that it is the same as TEXT base address setting in u-boot source code. *********************************************************************************** --- diff -Nur u-boot-1.1.3/doc/README.mpc83xxads u-boot-1.1.3- after/doc/README.mpc83xxads --- u-boot-1.1.3/doc/README.mpc83xxads 2005-08-14 07:53:35.000000000 +0800 +++ u-boot-1.1.3-after/doc/README.mpc83xxads 2005-10-14 10:34:19.871711464 +0800 @@ -83,15 +83,15 @@ 5.1 Reflash U-boot Image using U-boot

tftp 10000 u-boot.bin - protect off fe000000 fe09ffff - erase fe000000 fe09ffff + protect off all + erase fe700000 fe73ffff

- cp.b 10000 fe000000 xxxx + cp.b 10000 fe700000 xxxx or - cp.b 10000 fe000000 a0000 + cp.b 10000 fe700000 40000

-You might have to supply the correct byte count for 'xxxx' from -the TFTP. Maybe a0000 will work too, that corresponds to the +You might have to supply the correct byte count in hex for 'xxxx' from