Hello,

I use U-Boot with a Marvell PXA270 CPU. And I have built a new Windows Embedded CE 6.0 Image with a given BSP for the board. In the end I get a binary Image with a virtual start address. This means to me, that the MMU must be initialized of the bootloader. But I think this should be the task of the kernel. So my question is: Is it possible to initialize the MMU with U-Boot at all? And how can I do this?

Thank you,

Andreas

______________________________________________________________

Andreas Geisreiter

Entwicklung

DH electronics GmbH - Am Anger 8 - 83346 Bergen - Germany

HRB Traunstein 9602 - Ust ID Nr.: DE 174 205 805

Geschäftsführung Dipl.-Ing. Stefan Daxenberger, Dipl.-Ing. Helmut Henschke

Email: mailto:ageisreiter@dh-electronics.de

Web: www.dh-electronics.de