Hi,

I have Uboot loaded in my Coldire processor. My Kernel build for uClinux finally created few files (image.bin linux.bin romfs.img romfs-inst.log) in the images folder and copied image.bin to the /tftp of my system. So, I think image.bin is the one which will be loaded in my coldfire board.

But when I tried load it (by TeraTerm) in coldfire with below u-boot commands(tftp and bootm), it fails with error:

-> tftp 0x41000000 uImage-5329 (renamed image.bin )

-> bootm 0x41000000 Wrong Image Format for bootm command ERROR: can't get kernel image!

Can you please tell me how to make this binary loadable by uboot?

my u-boot version is below:

U-Boot 2008.10 (Dec 15 2008 - 11:03:39) CPU: Freescale MCF5329 (Mask:54 Version:2) CPU CLK 240 MHz BUS CLK 80 MHz Board: Freescale FireEngine 5329 EVB I2C: ready DRAM: 32 MB FLASH: 2 MB In: serial Out: serial Err: serial NAND: 16 MiB Net: FEC0

Thnaks & Regards, Manish