From: Jesse Gilles jgilles@multitech.com

Fix pin setting in MII mode

Signed-off-by: Jesse Gilles jgilles@multitech.com --- arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index d0d31da..3c58536 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -206,14 +206,14 @@ void at91_macb_hw_init(void) #ifndef CONFIG_RMII /* Only emac0 support MII */ if (has_emac0()) { - at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ } #endif }