[U-Boot] Status open patches: 8xxx
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx: 11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB 12/11 Paul Gortmaker [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support. 12/30 Poonam_Aggrwal-b1 [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd) 01/15 hamoshame Lamotek [U-Boot] MPC8572DS Registered DDR2 support. 01/22 Pieter [U-Boot] Custom MPC8548 boot using FDT problem 01/22 Scott Wood Re: [U-Boot] mpc8313erdb: crash in image_print_type() 02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts 02/05 Valeriy Glushkov [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334 02/10 "Ajeesh Kumar" U-boot level MPC8548 Ethernet internal/External Loop back testing 02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/16 Kim Phillips Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334 02/17 Heiko Schocher [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support 02/17 Heiko Schocher [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/17 Heiko Schocher [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature. 02/17 Kumar Gala [U-Boot] [PATCH] fsl: Don't spew messages related to PHY fixup of device tree 02/19 Anton Vorontsov [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx 02/19 Anton Vorontsov [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal 02/19 Anton Vorontsov [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper 02/19 Anton Vorontsov [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0 02/19 Anton Vorontsov [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values 02/19 Anton Vorontsov [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers 02/19 Anton Vorontsov [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value 02/19 Anton Vorontsov [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support 02/19 Heiko Schocher [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support 02/19 Heiko Schocher [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM 02/19 Heiko Schocher [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c 02/19 Heiko Schocher [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines 02/19 Heiko Schocher [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03 02/19 Heiko Schocher [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/19 Heiko Schocher [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.
Thanks in advance.
Best regards,
Wolfgang Denk
Hello Wolfgang, Kim,
Wolfgang Denk schrieb:
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx:
[...]
02/17 Heiko Schocher [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support 02/17 Heiko Schocher [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/17 Heiko Schocher [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
This three patches are replaced by v3 version of this patchset -> no longer needed.
bye Heiko
Dear Wolfgang
Wolfgang Denk wrote:
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx: 11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB 12/11 Paul Gortmaker [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support. 12/30 Poonam_Aggrwal-b1 [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd) 01/15 hamoshame Lamotek [U-Boot] MPC8572DS Registered DDR2 support. 01/22 Pieter [U-Boot] Custom MPC8548 boot using FDT problem
<Snip>
The problem addressed in " 01/22 Pieter [U-Boot] Custom MPC8548 boot using FDT problem " has been resolved and was a combination on defines in the board.h file and definition in the device tree source. is there something I need to do to resolve the "open patch status"
regards Pieter
On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx:
02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
Best regards,
Wolfgang Denk
Wolfgang,
It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.
Becky (or Kumar?),
Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?
Thanks, jdl
On Feb 23, 2009, at 12:14 PM, Jon Loeliger wrote:
On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx:
02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
Best regards,
Wolfgang Denk
Wolfgang,
It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.
Becky (or Kumar?),
Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?
So, there are only 2 patches of mine outstanding (the third message above is just a note about a dependency).
This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- bit addr map in boot messages
The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.
Cheers, Becky
OK, I have resubmitted the MAX_MEM_MAPPED patch to apply to the current master u-boot tree.
-Becky
On Feb 23, 2009, at 12:53 PM, Becky Bruce wrote:
On Feb 23, 2009, at 12:14 PM, Jon Loeliger wrote:
On Sun, 2009-02-22 at 01:00 +0100, Wolfgang Denk wrote:
Dear Kim, Andy & Jon,
I have the following patches still marked as open in my list. Could you please have a look...
8xxx:
02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Becky Bruce Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default 02/12 Jon Loeliger Re: [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
Best regards,
Wolfgang Denk
Wolfgang,
It was my belief that all outstanding 86xx patches had either been Acked-by me and should be picked up by either Andy or Wolfgang, or had been subsumed into other already applied patches.
Becky (or Kumar?),
Could you verify that the 36-bit and address-map related patches are correct in WD's current master head and that you are happy with them? I thought we got them all there, but I could be wrong. Or maybe we need to wait for a set to be picked up with the 85xx tree from Andy still?
So, there are only 2 patches of mine outstanding (the third message above is just a note about a dependency).
This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36- bit addr map in boot messages
The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.
Cheers, Becky _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Becky Bruce wrote:
This one should still apply and needs to be picked up, WD can pick it up directly because it's very small:
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages
OK, sounds fine by me. Thanks.
The second one looks like it won't apply anymore due to a change from Stefan; I will submit a new one that WD can pick up directly as long as it's OK with you.
Yep, consider it pre-Ack'ed. :-)
Thanks, jdl
On Sun, 22 Feb 2009 01:00:14 +0100 Wolfgang Denk wd@denx.de wrote:
I have the following patches still marked as open in my list. Could you please have a look...
8xxx: 11/06 Anton Vorontsov [U-Boot] [PATCH] mpc83xx: increase BOOTMAPSZ to 16MB
this is apparently pending resubmission from its author, Anton:
http://lists.denx.de/pipermail/u-boot/2008-November/043348.html:
"Please don't queue this patch yet. I'll send an updated version soon, that will also define CFG_BOOTM_LEN (so that bootm command will able to gunzip 16MB images)."
(Anton cc'd)
01/22 Scott Wood Re: [U-Boot] mpc8313erdb: crash in image_print_type()
this isn't a patch; it's a thread that concludes that manual relocation is needed.
02/05 Valeriy Glushkov [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
this is commit c9e34fe2e86f7b6cc8260f4b24cbdc7dd81e04c5 in the u-boot-mpc83xx tree.
02/16 Kim Phillips Re: [U-Boot] [PATCH] mpc8349itx: allow SATA boot from the onboard SIL1334
I believe this is me saying I applied it to u-boot-mpc83xx, just as I did above :).
02/17 Heiko Schocher [U-Boot] [PATCH 03/12 v2] 83xx, kmeter1: add I2C, dtt, eeprom support 02/17 Heiko Schocher [U-Boot] [PATCH 08/12 v2] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/17 Heiko Schocher [U-Boot] [PATCH 09/12 v2] 8360, kmeter1: added bootcount feature.
As he already mentioned, Heiko has already resubmitted a 3rd version of these...
02/19 Anton Vorontsov [U-Boot] [PATCH 0/7] Some PCIe patches for MPC83xx 02/19 Anton Vorontsov [U-Boot] [PATCH 1/7] mpc83xx: MPC837XEMDS: Initialize SerDes before negating PCIE reset signal 02/19 Anton Vorontsov [U-Boot] [PATCH 2/7] PCI: Add pci_last_busno() helper 02/19 Anton Vorontsov [U-Boot] [PATCH 3/7] mpc83xx: PCIe: Don't start bus enumeration at 0 02/19 Anton Vorontsov [U-Boot] [PATCH 4/7] mpc83xx: PCIe: Fix CONFIG_PCI_SCAN_SHOW reporting bogus values 02/19 Anton Vorontsov [U-Boot] [PATCH 5/7] mpc83xx: PCI: Fix bus-range fdt fixups for PCI1 controllers 02/19 Anton Vorontsov [U-Boot] [PATCH 6/7] mpc83xx: PCI: Fix hard-coded first_busno value 02/19 Anton Vorontsov [U-Boot] [PATCH 7/7] mpc83xx: MPC837XERDB: Add PCIe support 02/19 Heiko Schocher [U-Boot] [PATCH 3/9 v3] 83xx, kmeter1: add I2C, dtt, eeprom support 02/19 Heiko Schocher [U-Boot] [PATCH 5/9 v3] 83xx, kmeter1: autodetect size of DDR II RAM 02/19 Heiko Schocher [U-Boot] [PATCH 4/9 v3] 83xx, i2c: add mux support for fsl_i2c 02/19 Heiko Schocher [U-Boot] [PATCH 6/9 v3] 83xx: add missing TIMING_CFG1_CASLAT_* defines 02/19 Heiko Schocher [U-Boot] [PATCH 7/9 v3] 83xx, kmeter1: updates for 2009.03 02/19 Heiko Schocher [U-Boot] [PATCH 8/9 v3] 83xx, kmeter: QE_ENET10 errata for Silicon Revision 2.1 02/19 Heiko Schocher [U-Boot] [PATCH 9/9 v3] 8360, kmeter1: added bootcount feature.
...here. And Anton's are the latest submitted to the list and I intend on picking them up and sending you a pull request soon.
Kim
Dear Kim,
In message 20090223154208.d3712e54.kim.phillips@freescale.com you wrote: ...
...here. And Anton's are the latest submitted to the list and I intend on picking them up and sending you a pull request soon.
Thanks for the detailed report.
Best regards,
Wolfgang Denk
8xxx: 12/11 Paul Gortmaker [U-Boot] [PATCH] tsec: report when there is no vendor specific PHY support.
Applied
12/30 Poonam_Aggrwal-b1 [U-Boot] [PATCH][u-boot-85xx]The 32bit errata fix for 8572 for DDR2 (fwd)
This was applied (e1be0d25ecf494ae81245ca438738ba839d6329b)
01/15 hamoshame Lamotek [U-Boot] MPC8572DS Registered DDR2 support.
This is just a question thread
02/04 Jon Loeliger Re: [U-Boot] [PATCH 4/8] mpc86xx: Add support to populate addr map based on BATs 02/04 Jon Loeliger Re: [U-Boot] [PATCH 8/8] mpc8641hpcn: Change PCI MEM pci bus address 02/04 Jon Loeliger Re: [U-Boot] [PATCH 1/8] mpc8641hpcn: Set up outbound pci windows before inbound 02/04 Jon Loeliger Re: [U-Boot] [PATCH 5/8] mpc8641hpcn: Clean up PCI mapping concepts
All were applied at some point
02/10 "Ajeesh Kumar" U-boot level MPC8548 Ethernet internal/External Loop back testing
Not a patch
02/12 Becky Bruce [U-Boot] [PATCH] mpc8641hpcn: Indicate 36-bit addr map in boot messages 02/12 Becky Bruce [U-Boot] [PATCH] MPC86xx: set CONFIG_MAX_MEM_MAPPED to 2G by default
Both applied already.
participants (8)
-
Andy Fleming -
Becky Bruce -
Becky Bruce -
Heiko Schocher -
Jon Loeliger -
Kim Phillips -
Pieter -
Wolfgang Denk