For getting the I2C0 bus working in u-boot, the used PINS had to be enabled in the board.c. In the nanopi_neo2_defconfig you have to set the CONFIG_I2C0_ENABLE=y.

Best regards

Ronny Lubke

------------------------------------- Engineer

Metirionic GmbH Strehlener Straße 12 - 14 01069 Dresden

phone: +49-351-873229-26

http://www.metirionic.com/

Geschaeftsfuehrung: Dr. Attila Roemer Gesellschaftssitz: Dresden Amtsgericht: Dresden HRB 32209