There exists code in drivers/common/common.c to read the dr_mode from the device tree. This patch converts this driver to use that function to initialize the driver.

Signed-off-by: Adam Ford aford173@gmail.com --- V2: Fix issue where boards without dr_mode set would hang. This makes makes the code behave the same way as it did before by using ehci_usb_phy_mode() when dr_mode is unknown

diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 948394709f..33abfeada0 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -18,6 +18,7 @@ #include <dm.h> #include <asm/mach-types.h> #include <power/regulator.h> +#include <linux/usb/otg.h>

#include "ehci.h"

@@ -483,23 +484,23 @@ static int ehci_usb_phy_mode(struct udevice *dev) static int ehci_usb_ofdata_to_platdata(struct udevice *dev) { struct usb_platdata *plat = dev_get_platdata(dev); - const char *mode; + enum usb_dr_mode dr_mode;

- mode = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "dr_mode", NULL); - if (mode) { - if (strcmp(mode, "peripheral") == 0) - plat->init_type = USB_INIT_DEVICE; - else if (strcmp(mode, "host") == 0) - plat->init_type = USB_INIT_HOST; - else if (strcmp(mode, "otg") == 0) - return ehci_usb_phy_mode(dev); - else - return -EINVAL; + dr_mode = usb_get_dr_mode(dev_of_offset(dev));

- return 0; - } + switch (dr_mode) { + case USB_DR_MODE_HOST: + plat->init_type = USB_INIT_HOST; + break; + case USB_DR_MODE_PERIPHERAL: + plat->init_type = USB_INIT_DEVICE; + break; + case USB_DR_MODE_OTG: + case USB_DR_MODE_UNKNOWN: + return ehci_usb_phy_mode(dev); + };

- return ehci_usb_phy_mode(dev); + return 0; }

static int ehci_usb_probe(struct udevice *dev)