This patch adds support for Odroid-XU3.

Signed-off-by: Hyungwon Hwang human.hwang@samsung.com Cc: Minkyu Kang mk7.kang@samsung.com Cc: Lukasz Majewski l.majewski@samsung.com --- Changes for v3: - Remove unnecessary node from DT file - Remove unnecessary features from config file - Remove unnecessary macros from board-specific header file - Fix some trivial typos in comments Changes for v4: - Add MMC FIFO buffer's configuration to DT file - Make CONFIG_OF_CONTROL be set by the target information - Add basic document to doc/README.odroid-xu3 - Add CONFIG_CMD_EXT4 to config file - Add environment size and offset to config file - Add extra default environment to make bootable without modification - Remove unnecessary features from config file Changes for v5: - Convert /include/ to #include in DT file arch/arm/cpu/armv7/exynos/Kconfig | 5 ++ arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos5422-odroidxu3.dts | 60 ++++++++++++++ board/samsung/odroid-xu3/Kconfig | 12 +++ board/samsung/odroid-xu3/MAINTAINERS | 6 ++ board/samsung/odroid-xu3/Makefile | 7 ++ board/samsung/odroid-xu3/odroid-xu3.c | 131 +++++++++++++++++++++++++++++++ board/samsung/odroid-xu3/setup.h | 95 ++++++++++++++++++++++ configs/odroid-xu3_defconfig | 4 + doc/README.odroid-xu3 | 134 +++++++++++++++++++++++++++++++ include/configs/odroid_xu3.h | 144 ++++++++++++++++++++++++++++++++++ 11 files changed, 600 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts create mode 100644 board/samsung/odroid-xu3/Kconfig create mode 100644 board/samsung/odroid-xu3/MAINTAINERS create mode 100644 board/samsung/odroid-xu3/Makefile create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c create mode 100644 board/samsung/odroid-xu3/setup.h create mode 100644 configs/odroid-xu3_defconfig create mode 100644 doc/README.odroid-xu3 create mode 100644 include/configs/odroid_xu3.h

diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index 13dbd95..8fe530c 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -24,6 +24,10 @@ config TARGET_TRATS2 config TARGET_ODROID bool "Exynos4412 Odroid board"

+config TARGET_ODROID_XU3 + bool "Exynos5422 Odroid board" + select OF_CONTROL if !SPL_BUILD + config TARGET_ARNDALE bool "Exynos5250 Arndale board" select SUPPORT_SPL @@ -65,6 +69,7 @@ source "board/samsung/universal_c210/Kconfig" source "board/samsung/origen/Kconfig" source "board/samsung/trats2/Kconfig" source "board/samsung/odroid/Kconfig" +source "board/samsung/odroid-xu3/Kconfig" source "board/samsung/arndale/Kconfig" source "board/samsung/smdk5250/Kconfig" source "board/samsung/smdk5420/Kconfig" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 2b9bd93..d984f34 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -12,7 +12,8 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5420-smdk5420.dtb \ exynos5420-peach-pit.dtb \ - exynos5800-peach-pi.dtb + exynos5800-peach-pi.dtb \ + exynos5422-odroidxu3.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts new file mode 100644 index 0000000..52199d9 --- /dev/null +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -0,0 +1,60 @@ +/* + * Odroid XU3 device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "exynos54xx.dtsi" + +/ { + model = "Odroid XU3 based on EXYNOS5422"; + compatible = "samsung,odroidxu3", "samsung,exynos5"; + + aliases { + serial0 = "/serial@12C00000"; + console = "/serial@12C20000"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000 + 0x80000000 0x10000000 + 0x90000000 0x10000000 + 0xa0000000 0x10000000 + 0xb0000000 0xea00000>; + }; + + serial@12C20000 { + status="okay"; + }; + + mmc@12200000 { + samsung,bus-width = <8>; + samsung,timing = <1 3 3>; + samsung,removable = <0>; + samsung,pre-init; + fifoth_val = <0x200f0020>; + }; + + mmc@12210000 { + status = "disabled"; + }; + + mmc@12220000 { + samsung,bus-width = <4>; + samsung,timing = <1 2 3>; + samsung,removable = <1>; + fifoth_val = <0x200f0020>; + }; + + mmc@12230000 { + status = "disabled"; + }; +}; diff --git a/board/samsung/odroid-xu3/Kconfig b/board/samsung/odroid-xu3/Kconfig new file mode 100644 index 0000000..6159692 --- /dev/null +++ b/board/samsung/odroid-xu3/Kconfig @@ -0,0 +1,12 @@ +if TARGET_ODROID_XU3 + +config SYS_BOARD + default "odroid-xu3" + +config SYS_VENDOR + default "samsung" + +config SYS_CONFIG_NAME + default "odroid_xu3" + +endif diff --git a/board/samsung/odroid-xu3/MAINTAINERS b/board/samsung/odroid-xu3/MAINTAINERS new file mode 100644 index 0000000..50cf928 --- /dev/null +++ b/board/samsung/odroid-xu3/MAINTAINERS @@ -0,0 +1,6 @@ +ODROID-XU3 BOARD +M: Hyungwon Hwang human.hwang@samsung.com +S: Maintained +F: board/samsung/odroid-xu3/ +F: include/configs/odroid_xu3.h +F: configs/odroid-xu3_defconfig diff --git a/board/samsung/odroid-xu3/Makefile b/board/samsung/odroid-xu3/Makefile new file mode 100644 index 0000000..85ae5c5 --- /dev/null +++ b/board/samsung/odroid-xu3/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (c) 2014 Samsung Electronics Co., Ltd. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := odroid-xu3.o diff --git a/board/samsung/odroid-xu3/odroid-xu3.c b/board/samsung/odroid-xu3/odroid-xu3.c new file mode 100644 index 0000000..ea39487 --- /dev/null +++ b/board/samsung/odroid-xu3/odroid-xu3.c @@ -0,0 +1,131 @@ +/* + * Copyright (C) 2014 Samsung Electronics + * Hyungwon Hwang human.hwang@samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <netdev.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/power.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/sromc.h> +#include "setup.h" + +DECLARE_GLOBAL_DATA_PTR; + +unsigned int get_board_rev(void) +{ + unsigned int rev = 0; + return rev; +} + +int exynos_init(void) +{ + return 0; +} + +static int board_clock_init(void) +{ + unsigned int set, clr, clr_src_cpu, clr_pll_con0; + struct exynos5420_clock *clk = (struct exynos5420_clock *) + samsung_get_base_clock(); + /* + * CMU_CPU clocks src to MPLL + * Bit values: 0 ; 1 + * MUX_APLL_SEL: FIN_PLL ; FOUT_APLL + * MUX_CORE_SEL: MOUT_APLL ; SCLK_MPLL + * MUX_HPM_SEL: MOUT_APLL ; SCLK_MPLL_USER_C + * MUX_MPLL_USER_SEL_C: FIN_PLL ; SCLK_MPLL + */ + + /* Set CMU_CPU clocks src to OSCCLK */ + clr_src_cpu = MUX_APLL_SEL(1) | MUX_CORE_SEL(1); + set = MUX_APLL_SEL(0) | MUX_CORE_SEL(1); + + clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set); + + while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu))) + continue; + + /* Set APLL to 1200MHz */ + clr_pll_con0 = SDIV(7) | PDIV(63) | MDIV(1023) | FSEL(1) | + PLL_ENABLE(1); + set = SDIV(0) | PDIV(2) | MDIV(100) | PLL_ENABLE(1); + + clrsetbits_le32(&clk->apll_con0, clr_pll_con0, set); + + while (!(readl(&clk->apll_con0) & PLL_LOCKED_BIT)) + continue; + + /* Set CMU_CPU clocks src to APLL */ + set = MUX_APLL_SEL(1) | MUX_CORE_SEL(0); + clrsetbits_le32(&clk->src_cpu, clr_src_cpu, set); + + while (MUX_STAT_CPU_CHANGING(readl(&clk->mux_stat_cpu))) + continue; + + clr = ARM_RATIO(7) | CPUD_RATIO(7) | ATB_RATIO(7) | + PCLK_DBG_RATIO(7) | APLL_RATIO(7) | ARM2_RATIO(7); + set = ARM_RATIO(0) | CPUD_RATIO(2) | ATB_RATIO(5) | + PCLK_DBG_RATIO(5) | APLL_RATIO(0) | ARM2_RATIO(0); + + clrsetbits_le32(&clk->div_cpu0, clr, set); + + while (readl(&clk->div_stat_cpu0) & DIV_STAT_CPU0_CHANGING) + continue; + + /* Set MPLL to 800MHz */ + set = SDIV(1) | PDIV(3) | MDIV(200) | PLL_ENABLE(1); + + clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set); + + while (!(readl(&clk->mpll_con0) & PLL_LOCKED_BIT)) + continue; + + /* Set CLKMUX_UART src to MPLL */ + clr = UART0_SEL(7) | UART1_SEL(7) | UART2_SEL(7) | UART3_SEL(7); + set = UART0_SEL(3) | UART1_SEL(3) | UART2_SEL(3) | UART3_SEL(3); + + clrsetbits_le32(&clk->src_peric0, clr, set); + + /* Set SCLK_UART to 400 MHz (MPLL / 2) */ + clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) | + UART3_RATIO(15); + set = UART0_RATIO(1) | UART1_RATIO(1) | UART2_RATIO(1) | + UART3_RATIO(1); + + clrsetbits_le32(&clk->div_peric0, clr, set); + + while (readl(&clk->div_stat_peric0) & DIV_STAT_PERIC0_CHANGING) + continue; + + /* Set CLKMUX_MMC src to MPLL */ + clr = MUX_MMC0_SEL(7) | MUX_MMC1_SEL(7) | MUX_MMC2_SEL(7); + set = MUX_MMC0_SEL(3) | MUX_MMC1_SEL(3) | MUX_MMC2_SEL(3); + + clrsetbits_le32(&clk->src_fsys, clr, set); + + clr = MMC0_RATIO(0x3ff) | MMC1_RATIO(0x3ff) | MMC2_RATIO(0x3ff); + set = MMC0_RATIO(0) | MMC1_RATIO(0) | MMC2_RATIO(0); + + clrsetbits_le32(&clk->div_fsys1, clr, set); + + /* Wait for divider ready status */ + while (readl(&clk->div_stat_fsys1) & DIV_STAT_FSYS1_CHANGING) + continue; + + return 0; +} + +#ifdef CONFIG_BOARD_EARLY_INIT_F +int exynos_early_init_f(void) +{ + return board_clock_init(); +} +#endif diff --git a/board/samsung/odroid-xu3/setup.h b/board/samsung/odroid-xu3/setup.h new file mode 100644 index 0000000..143c189 --- /dev/null +++ b/board/samsung/odroid-xu3/setup.h @@ -0,0 +1,95 @@ +/* + * (C) Copyright 2014 Samsung Electronics + * Hyungwon Hwang human.hwang@samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ODROID_XU3_SETUP__ +#define __ODROID_XU3_SETUP__ + +#define SDIV(x) ((x) & 0x7) +#define PDIV(x) (((x) & 0x3f) << 8) +#define MDIV(x) (((x) & 0x3ff) << 16) +#define FSEL(x) (((x) & 0x1) << 27) +#define PLL_LOCKED_BIT (0x1 << 29) +#define PLL_ENABLE(x) (((x) & 0x1) << 31) + +/* CLK_SRC_CPU */ +#define MUX_APLL_SEL(x) ((x) & 0x1) +#define MUX_CORE_SEL(x) (((x) & 0x1) << 16) + +/* CLK_MUX_STAT_CPU */ +#define APLL_SEL(x) ((x) & 0x7) +#define CORE_SEL(x) (((x) & 0x7) << 16) +#define MUX_STAT_CPU_CHANGING(x) !(((x) & APLL_SEL(0)) || \ + (x) & APLL_SEL(1) || \ + (x) & CORE_SEL(0) || \ + (x) & CORE_SEL(1)) + +/* CLK_DIV_CPU0 */ +#define ARM_RATIO(x) ((x) & 0x7) +#define CPUD_RATIO(x) (((x) & 0x7) << 4) +#define ATB_RATIO(x) (((x) & 0x7) << 16) +#define PCLK_DBG_RATIO(x) (((x) & 0x7) << 20) +#define APLL_RATIO(x) (((x) & 0x7) << 24) +#define ARM2_RATIO(x) (((x) & 0x7) << 28) + +/* CLK_DIV_STAT_CPU0 */ +#define DIV_CPUD(x) (((x) & 0x1) << 4) +#define DIV_ATB(x) (((x) & 0x1) << 16) +#define DIV_PCLK_DBG(x) (((x) & 0x1) << 20) +#define DIV_APLL(x) (((x) & 0x1) << 24) +#define DIV_ARM2(x) (((x) & 0x1) << 28) + +#define DIV_STAT_CHANGING 0x1 +#define DIV_STAT_CPU0_CHANGING (DIV_CPUD(DIV_STAT_CHANGING) | \ + DIV_ATB(DIV_STAT_CHANGING) | \ + DIV_PCLK_DBG(DIV_STAT_CHANGING) | \ + DIV_APLL(DIV_STAT_CHANGING) | \ + DIV_ARM2(DIV_STAT_CHANGING)) + +/* Set CLK_SRC_PERIC0 */ +#define UART0_SEL(x) (((x) & 0xf) << 4) +#define UART1_SEL(x) (((x) & 0xf) << 8) +#define UART2_SEL(x) (((x) & 0xf) << 12) +#define UART3_SEL(x) (((x) & 0xf) << 16) + +/* Set CLK_DIV_PERIC0 */ +#define UART0_RATIO(x) (((x) & 0xf) << 8) +#define UART1_RATIO(x) (((x) & 0xf) << 12) +#define UART2_RATIO(x) (((x) & 0xf) << 16) +#define UART3_RATIO(x) (((x) & 0xf) << 20) + +/* Set CLK_DIV_STAT_PERIC0 */ +#define DIV_UART0(x) ((x) & 0x1) +#define DIV_UART1(x) (((x) & 0x1) << 4) +#define DIV_UART2(x) (((x) & 0x1) << 8) +#define DIV_UART3(x) (((x) & 0x1) << 12) +#define DIV_UART4(x) (((x) & 0x1) << 16) + +#define DIV_STAT_PERIC0_CHANGING (DIV_UART4(DIV_STAT_CHANGING) | \ + DIV_UART3(DIV_STAT_CHANGING) | \ + DIV_UART2(DIV_STAT_CHANGING) | \ + DIV_UART1(DIV_STAT_CHANGING) | \ + DIV_UART0(DIV_STAT_CHANGING)) + +/* CLK_SRC_FSYS */ +#define MUX_MMC0_SEL(x) (((x) & 0x7) << 8) +#define MUX_MMC1_SEL(x) (((x) & 0x7) << 12) +#define MUX_MMC2_SEL(x) (((x) & 0x7) << 16) + +/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO(x) ((x) & 0x3ff) +#define MMC1_RATIO(x) (((x) & 0x3ff) << 10) +#define MMC2_RATIO(x) (((x) & 0x3ff) << 20) + +#define DIV_MMC0(x) (((x) & 1) << 20) +#define DIV_MMC1(x) (((x) & 1) << 24) +#define DIV_MMC2(x) (((x) & 1) << 28) + +#define DIV_STAT_FSYS1_CHANGING (DIV_MMC0(DIV_STAT_CHANGING) | \ + DIV_MMC1(DIV_STAT_CHANGING) | \ + DIV_MMC2(DIV_STAT_CHANGING)) + +#endif diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig new file mode 100644 index 0000000..74aa0cf --- /dev/null +++ b/configs/odroid-xu3_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_ARCH_EXYNOS=y +CONFIG_TARGET_ODROID_XU3=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5422-odroidxu3" diff --git a/doc/README.odroid-xu3 b/doc/README.odroid-xu3 new file mode 100644 index 0000000..8e1f333 --- /dev/null +++ b/doc/README.odroid-xu3 @@ -0,0 +1,134 @@ + U-boot for Odroid XU3 +======================== + +1. Summary +========== +This is a quick instruction for setup Odroid boards based on Exynos5422. +Exynos5422 is almost same with Exynos5800 which is a variant of Exynos5422 for +Chromebook. + +Board config: odroid-xu3_config + +2. Supported devices +==================== +This U-BOOT config can be used on the board: +- Odroid XU3 +with CPU Exynos 5422 and 2GB of RAM + +3. Boot sequence +================ +iROM->BL1->(BL2 + TrustZone)->U-BOOT + +To boot up, this version of U-BOOT needs BL1, BL2, and TrustZone binary. +It can be downloaded from: +https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardker... + +4. Boot media layout +==================== +The table below shows SD/eMMC cards layout for U-boot. +The block offset is starting from 0 and the block size is 512B. + ------------------------------------- +| Binary | Block offset| part type | +| name | SD | eMMC |(eMMC only)| + ------------------------------------- +| Bl1 | 1 | 0 | 1 (boot) | +| Bl2 | 31 | 30 | 1 (boot) | +| U-boot | 63 | 62 | 1 (boot) | +| Tzsw | 2111 | 2110 | 1 (boot) | +| Uboot Env | 2500 | 2500 | 0 (user) | + ------------------------------------- + +5. Prepare the SD boot card - with SD card reader +================================================= +To prepare bootable media you need boot binaries provided by hardkernel. +The files from the link in point 3. +- bl1.bin.hardkernel +- bl2.bin.hardkernel +- tzsw.bin.hardkernel +- u-boot.bin.hardkernel + +This is all you need to boot this board. You can write the binaries to SD card +just by executiog sd_fusing.sh. You cannot use this script to write binaries to +eMMC card.It is valid only for SD card. + +*note +You cannot access the eMMC protected part (the first 8MB roughly) using an +ordinary eMMC reader. + +*note: +If you build u-boot by yourself, you will find u-boot.bin and u-boot-dtb.bin +as the build result. You have to use u-boot-dtb.bin instead of u-boot.bin. + +quick steps for Linux: +- Download all files from the link at point 3. +- put any SD card into the SD reader +- check the device with "dmesg" +- run ./sd_fusing.sh /dev/sdX - where X is SD card device (but not a partition) +Check if Hardkernel U-boot is booting, and next do the same with your U-boot. + +6. Prepare the eMMC boot card + with a eMMC card reader (boot from eMMC card slot) +===================================================== +To boot the device from the eMMC slot you should use a special card reader +which supports eMMC partition switch. All of the boot binaries are stored +on the eMMC boot partition which is normally hidden. + +The "sd_fusing.sh" script can be used after updating offsets of binaries +according to the table from point 4. Be sure that you are working on the right +eMMC partition - its size is usually very small, about 1-4 MiB. + +7. Prepare the eMMC boot card + with a SD card reader (boot from SD card slot) +================================================= +If you have an eMMC->microSD adapter you can prepare the card as in point 5. +But then the device can boot only from the SD card slot. + +8. Prepare the boot media using Hardkernel U-boot +================================================= +You can update the U-boot to the custom one if you have an working bootloader +delivered with the board on a eMMC/SD card. Then follow the steps: +- install the android fastboot tool +- connect a micro usb cable to the board +- on the U-boot prompt, run command: fastboot (as a root) +- on the host, run command: "fastboot flash bootloader u-boot-dtb.bin" +- the custom U-boot should start after the board resets. + +9. Partition layout +==================== +Default U-boot environment is setup for fixed partition layout. + +Partition table: MSDOS. Disk layout and files as listed in the table below. + ----- ------ ------ ------ -------- --------------------------------- +| Num | Name | FS | Size | Offset | Reguired files | +| | | Type | MiB | MiB | | + ----- ------ ------ ------ -------- --------------------------------- +| 1 | BOOT | fat | 100 | 2 | kernel, fdt** | +| 2 | ROOT | ext4 | - | | any Linux system | + ----- ------ ------ ------ -------- --------------------------------- + +**note: +Supported fdt files are: +- exynos5422-odroidxu3.dtb + +Supported kernel files are: +- Image.itb +- zImage +- uImage + +10. The environment and booting the kernel +========================================== +There are three macros defined in config for various boot options: +Two for both, kernel with device tree support and also without it: +- boot_uimg - load uImage +- boot_zimg - load zImage +If proper fdt file exists then it will be automatically loaded, +so for old kernel types, please remove fdt file from boot partition. + +The third boot option for multi image support (more info: doc/uImage.FIT/) +- boot_fit - for binary file: "Image.itb" + +Default boot command: "autoboot" +And the boot sequence is: +- boot_fit - if "Image.itb" exists +- boot_zimg - if "zImage" exists +- boot_uimg - if "uImage" exists diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h new file mode 100644 index 0000000..cda4f26 --- /dev/null +++ b/include/configs/odroid_xu3.h @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2013 Samsung Electronics + * Hyungwon Hwang human.hwang@samsung.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ODROID_XU3_H +#define __CONFIG_ODROID_XU3_H + +#include "exynos5-common.h" + +#define CONFIG_SYS_PROMPT "ODROID-XU3 # " +#define CONFIG_IDENT_STRING " for ODROID-XU3" + +#define CONFIG_BOARD_COMMON + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 + +/* select serial console configuration */ +#define CONFIG_SERIAL2 /* use SERIAL 2 */ + +#define TZPC_BASE_OFFSET 0x10000 + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT + +/* + * FIXME: The number of bank is actually 8. But there is no way to reserver the + * last 16 Mib in the last bank now. So I just excluded the last bank + * temporally. + */ +#define CONFIG_NR_DRAM_BANKS 7 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + +#define CONFIG_ENV_IS_IN_MMC + +#undef CONFIG_ENV_SIZE +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_SIZE 4096 +#define CONFIG_ENV_OFFSET (SZ_1K * 1280) /* 1.25 MiB offset */ + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) + +#define CONFIG_BOOTCOMMAND "run autoboot" +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" + +/* + * Bootable media layout: + * dev: SD eMMC(part boot) + * BL1 1 0 + * BL2 31 30 + * UBOOT 63 62 + * TZSW 2111 2110 + * ENV 2560 2560(part user) + * + * MBR Primary partiions: + * Num Name Size Offset + * 1. BOOT: 100MiB 2MiB + * 2. ROOT: - +*/ +#ifdef CONFIG_EXTRA_ENV_SETTINGS +#undef CONFIG_EXTRA_ENV_SETTINGS +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadkernel=fatload mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} " \ + "${kernelname}\0" \ + "loadinitrd=fatload mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} " \ + "${initrdname}\0" \ + "loaddtb=fatload mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} " \ + "${fdtfile}\0" \ + "check_ramdisk=" \ + "if run loadinitrd; then " \ + "setenv initrd_addr ${initrdaddr};" \ + "else " \ + "setenv initrd_addr -;" \ + "fi;\0" \ + "check_dtb=" \ + "if run loaddtb; then " \ + "setenv fdt_addr ${fdtaddr};" \ + "else " \ + "setenv fdt_addr;" \ + "fi;\0" \ + "kernel_args=" \ + "setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart}" \ + " rootwait ${console} ${opts}\0" \ + "boot_fit=" \ + "setenv kerneladdr 0x42000000;" \ + "setenv kernelname Image.itb;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootm ${kerneladdr}#${boardname}\0" \ + "boot_uimg=" \ + "setenv kerneladdr 0x40007FC0;" \ + "setenv kernelname uImage;" \ + "run check_dtb;" \ + "run check_ramdisk;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \ + "boot_zimg=" \ + "setenv kerneladdr 0x40007FC0;" \ + "setenv kernelname zImage;" \ + "run check_dtb;" \ + "run check_ramdisk;" \ + "run loadkernel;" \ + "run kernel_args;" \ + "bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};\0" \ + "autoboot=" \ + "if test -e mmc 0 Image.itb; then; " \ + "run boot_fit;" \ + "elif test -e mmc 0 zImage; then; " \ + "run boot_zimg;" \ + "elif test -e mmc 0 uImage; then; " \ + "run boot_uimg;" \ + "fi;\0" \ + "console=" CONFIG_DEFAULT_CONSOLE \ + "mmcbootdev=0\0" \ + "mmcbootpart=1\0" \ + "mmcrootdev=0\0" \ + "mmcrootpart=2\0" \ + "bootdelay=0\0" \ + "dfu_alt_info=Please reset the board\0" \ + "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \ + "consoleoff=set console console=ram; save; reset\0" \ + "initrdname=uInitrd\0" \ + "initrdaddr=42000000\0" \ + "fdtaddr=40800000\0" + +/* FIXME: MUST BE REMOVED AFTER TMU IS TURNED ON */ +#undef CONFIG_EXYNOS_TMU +#undef CONFIG_TMU_CMD_DTT + +#ifdef CONFIG_CMD_NET +#undef CONFIG_CMD_NET +#undef CONFIG_SMC911X +#undef CONFIG_CMD_PXE +#undef CONFIG_MENU +#endif + +#endif /* __CONFIG_H */