On 24/11/2014 15:24, Fabio Estevam wrote:

Printing the calibration data on every boot does not provide really useful information:

U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz CPU: Thermal calibration data: 0x5d85067d CPU: Temperature 33 C Reset cause: POR Board: MX6-SabreSD

Do not display the calibration data in order to have a cleaner boot log.

Signed-off-by: Fabio Estevam fabio.estevam@freescale.com

drivers/thermal/imx_thermal.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 1161585..0bd9cfd 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev) if (fuse == 0 || fuse == ~0) { printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse); return -EPERM;

• } else {

• printf("CPU:   Thermal calibration data: 0x%x\n", fuse);
  

  }

  *priv = fuse;

Applied to u-boot-imx, thanks !

Best regards, Stefano Babic