Dne sreda, 05. april 2023 ob 22:30:11 CEST je Andre Przywara napisal(a):

Some SoCs of the H616 family use a die variant, that puts some CPU power and reset control registers at a different address. There are examples of two instances of the same board, using different die revisions of the otherwise same H313 SoC. We need to write to a register in that block *very* early in the SPL boot, to switch the core to AArch64.

Since the devices are otherwise indistinguishable, let the SPL code read that die variant and use the respective RVBAR address based on that. That is a bit tricky, since we need to do that in hand-coded AArch32 machine language, shared by all 64-bit SoCs. To avoid build dependencies in this mess, we always provide two addresses to choose from, and just give identical values for all other SoCs. This allows the same code to run on all 64-bit SoCs, and controls this switch behaviour purely from Kconfig.

Signed-off-by: Andre Przywara andre.przywara@arm.com

Hi,

this patch goes on top of the two patches I sent earlier, that introduce CONFIG_SUNXI_RVBAR_ADDRESS. I don't have a device with that die variant, so just roughly tested this by inverting the ldrne and swapping the addresses. Please let me know if you have such a device and can confirm that this code works on the original and alternative die alike.

Cheers, Andre

arch/arm/include/asm/arch-sunxi/boot0.h | 14 ++++++++++---- arch/arm/mach-sunxi/Kconfig | 17 ++++++++++++++++- 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/boot0.h b/arch/arm/include/asm/arch-sunxi/boot0.h index 1a396f78488..b27df3b9b5e 100644 --- a/arch/arm/include/asm/arch-sunxi/boot0.h +++ b/arch/arm/include/asm/arch-sunxi/boot0.h @@ -20,8 +20,8 @@ b reset .space 0x7c

• .word 0xe28f0058 // add r0, pc, #88
• .word 0xe59f1054 // ldr r1, [pc, #84]

• .word 0xe28f0070 // add r0, pc, #112 // @(fel_stash -

.)

• .word 0xe59f106c // ldr r1, [pc, #108] // fel_stash - . .word 0xe0800001 // add r0, r0, r1 .word 0xe580d000 // str sp, [r0] .word 0xe580e004 // str lr, [r0, #4]

@@ -32,8 +32,12 @@ .word 0xee1cef10 // mrc 15, 0, lr, cr12, cr0, {0} .word 0xe580e010 // str lr, [r0, #16]

• .word 0xe59f1024 // ldr r1, [pc, #36] ; 0x170000a0
• .word 0xe59f0024 // ldr r0, [pc, #36] ;

CONFIG_*_TEXT_BASE

• .word 0xe59f1034 // ldr r1, [pc, #52] ; RVBAR_ADDRESS
• .word 0xe59f0034 // ldr r0, [pc, #52] ; SUNXI_SRAMC_BASE
• .word 0xe5900024 // ldr r0, [r0, #36] ; SRAM_VER_REG
• .word 0xe21000ff // ands r0, r0, #255 ; 0xff
• .word 0x159f102c // ldrne r1, [pc, #44] ; RVBAR_ALTERNATIVE
• .word 0xe59f002c // ldr r0, [pc, #44] ; CONFIG_*TEXT_BASE .word 0xe5810000 // str r0, [r1] .word 0xf57ff04f // dsb sy .word 0xf57ff06f // isb sy

@@ -45,6 +49,8 @@ .word 0xeafffffd // b @wfi

.word CONFIG_SUNXI_RVBAR_ADDRESS // writable RVBAR

mapping addr

• .word SUNXI_SRAMC_BASE
• .word CONFIG_SUNXI_RVBAR_ALTERNATIVE // address for die

variant

#ifdef CONFIG_SPL_BUILD .word CONFIG_SPL_TEXT_BASE #else diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 0527b3863a7..be0910499bb 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -111,7 +111,7 @@ config SUNXI_SRAM_ADDRESS SRAM to a different address.

config SUNXI_RVBAR_ADDRESS

• hex "RVBAR address"

• hex depends on ARM64 default 0x09010040 if SUN50I_GEN_H6 default 0x017000a0

@@ -122,6 +122,21 @@ config SUNXI_RVBAR_ADDRESS entry point when switching to AArch64. This store is on different addresses, depending on the SoC.

+config SUNXI_RVBAR_ALTERNATIVE

• hex
• depends on ARM64
• default 0x81000040 if MACH_SUN50I_H616

As discussed on IRC by warpme, above default has a typo.

Apart from that, changes look good, so once fixed: Reviewed-by: Jernej Skrabec jernej.skrabec@gmail.com

Best regards, Jernej

• default 0x09010040 if SUN50I_GEN_H6
• default 0x017000a0
• ---help---
• The H616 die exists is at least two variants, with one having the
• RVBAR registers at a different address. If the SoC variant ID
• (stored in SRAM_VER_REG[7:0]) is not 0, we need to use the
• other address.
• Set this alternative address to the same as the normal address
• for all other SoCs, so the content of the SRAM_VER_REG becomes
• irrelevant there, and we can use the same code.

config SUNXI_A64_TIMER_ERRATUM bool