[PULL] u-boot-network/network_master
Hi Tom,
Please pull the latest patches in u-boot-net tree.
The following changes since commit a298d4fbcdba1b38e48ea2af0fc5386cab2070da:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2021-06-17 08:44:56 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-net.git network_master
for you to fetch changes up to 54c321f9deeba309989f0828e4d0427cbfbefcd3:
net: octeontx: smi: use dt live tree API (2021-06-18 11:29:17 +0300)
---------------------------------------------------------------- Daniil Stas (2): net: dwc_eth_qos: Fix needless phy auto-negotiation restarts net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7b
Dimitri John Ledkov (1): cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.
Heinrich Schuchardt (1): net: sun8i-emac: fix MDIO frequency
Hou Zhiqiang (1): Fix a memory leak issue in the RX port initialization.
Jassi Brar (1): net: synquacer: Add netsec driver
Michael Walle (2): net: use a more deterministic approach to get the active ethernet device net: use the same alias stem for ethernet as linux
Tim Harvey (2): net: e1000: do not attempt to set hwaddr for i210 without FLASH net: octeontx: smi: use dt live tree API
arch/arm/dts/fsl-ls1028a-rdb.dts | 12 +- arch/sandbox/dts/test.dts | 10 +- cmd/pxe_utils.c | 8 + drivers/net/Kconfig | 8 + drivers/net/Makefile | 1 + drivers/net/dwc_eth_qos.c | 19 +- drivers/net/e1000.c | 4 + drivers/net/e1000.h | 1 + drivers/net/fm/eth.c | 4 +- drivers/net/octeontx/smi.c | 24 +- drivers/net/sni_netsec.c | 1134 ++++++++++++++++++++++++++++++++++++++ drivers/net/sun8i_emac.c | 8 +- net/eth-uclass.c | 21 +- test/dm/ofnode.c | 2 +- test/dm/test-fdt.c | 2 +- 15 files changed, 1207 insertions(+), 51 deletions(-) create mode 100644 drivers/net/sni_netsec.c
Best regards, Ramon
On Fri, Jun 18, 2021 at 02:42:50PM +0300, Ramon Fried wrote:
Hi Tom,
Please pull the latest patches in u-boot-net tree.
The following changes since commit a298d4fbcdba1b38e48ea2af0fc5386cab2070da:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2021-06-17 08:44:56 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-net.git network_master
Please note that a tag with a short summary of the changes is preferred, but not required. Also, if you have something like this: [remote "network"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://source.denx.de/u-boot/custodians/u-boot-net.git pushurl = git@source.denx.de:u-boot/custodians/u-boot-net.git
in your .git/config when you use git request-pull it should give the non-ssh URI.
for you to fetch changes up to 54c321f9deeba309989f0828e4d0427cbfbefcd3:
net: octeontx: smi: use dt live tree API (2021-06-18 11:29:17 +0300)
Applied to u-boot/master, thanks!
On Fri, Jun 18, 2021 at 8:17 PM Tom Rini trini@konsulko.com wrote:
On Fri, Jun 18, 2021 at 02:42:50PM +0300, Ramon Fried wrote:
Hi Tom,
Please pull the latest patches in u-boot-net tree.
The following changes since commit a298d4fbcdba1b38e48ea2af0fc5386cab2070da:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2021-06-17 08:44:56 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-net.git network_master
Please note that a tag with a short summary of the changes is preferred, but not required. Also, if you have something like this: [remote "network"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://source.denx.de/u-boot/custodians/u-boot-net.git pushurl = git@source.denx.de:u-boot/custodians/u-boot-net.git
in your .git/config when you use git request-pull it should give the non-ssh URI.
for you to fetch changes up to 54c321f9deeba309989f0828e4d0427cbfbefcd3:
net: octeontx: smi: use dt live tree API (2021-06-18 11:29:17 +0300)
Applied to u-boot/master, thanks!
-- Tom
Hi. Out of curiosity, why do you prepare non-ssh URI ? Thanks, Ramon
On Wed, Jun 30, 2021 at 12:52:59AM +0300, Ramon Fried wrote:
On Fri, Jun 18, 2021 at 8:17 PM Tom Rini trini@konsulko.com wrote:
On Fri, Jun 18, 2021 at 02:42:50PM +0300, Ramon Fried wrote:
Hi Tom,
Please pull the latest patches in u-boot-net tree.
The following changes since commit a298d4fbcdba1b38e48ea2af0fc5386cab2070da:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2021-06-17 08:44:56 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-net.git network_master
Please note that a tag with a short summary of the changes is preferred, but not required. Also, if you have something like this: [remote "network"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://source.denx.de/u-boot/custodians/u-boot-net.git pushurl = git@source.denx.de:u-boot/custodians/u-boot-net.git
in your .git/config when you use git request-pull it should give the non-ssh URI.
for you to fetch changes up to 54c321f9deeba309989f0828e4d0427cbfbefcd3:
net: octeontx: smi: use dt live tree API (2021-06-18 11:29:17 +0300)
Applied to u-boot/master, thanks!
-- Tom
Hi. Out of curiosity, why do you prepare non-ssh URI ?
I like for the git history to contain public URIs just in case folks are tracking along or otherwise using the information for some reason.
On Wed, Jun 30, 2021 at 12:56 AM Tom Rini trini@konsulko.com wrote:
On Wed, Jun 30, 2021 at 12:52:59AM +0300, Ramon Fried wrote:
On Fri, Jun 18, 2021 at 8:17 PM Tom Rini trini@konsulko.com wrote:
On Fri, Jun 18, 2021 at 02:42:50PM +0300, Ramon Fried wrote:
Hi Tom,
Please pull the latest patches in u-boot-net tree.
The following changes since commit a298d4fbcdba1b38e48ea2af0fc5386cab2070da:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq (2021-06-17 08:44:56 -0400)
are available in the Git repository at:
git@source.denx.de:u-boot/custodians/u-boot-net.git network_master
Please note that a tag with a short summary of the changes is preferred, but not required. Also, if you have something like this: [remote "network"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://source.denx.de/u-boot/custodians/u-boot-net.git pushurl = git@source.denx.de:u-boot/custodians/u-boot-net.git
in your .git/config when you use git request-pull it should give the non-ssh URI.
for you to fetch changes up to 54c321f9deeba309989f0828e4d0427cbfbefcd3:
net: octeontx: smi: use dt live tree API (2021-06-18 11:29:17 +0300)
Applied to u-boot/master, thanks!
-- Tom
Hi. Out of curiosity, why do you prepare non-ssh URI ?
I like for the git history to contain public URIs just in case folks are tracking along or otherwise using the information for some reason.
-- Tom
Got it.
participants (2)
-
Ramon Fried -
Tom Rini